Merge tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add new hardware support (new Qualcomm SoC versions in cpufreq,
  RK3568/RK3588 in devfreq), extend the OPP (operating performance
  points) framework, improve cpufreq governors, fix issues and clean up
  code (most of the changes are in cpufreq and devfreq).

  Specifics:

   - Add support for several Qualcomm SoC versions and other similar
     changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
     Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
     Gerhold and Varadarajan Narayanan)

   - Clean up the tegra cpufreq driver (Sumit Gupta)

   - Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob
     Herring)

   - Add support for TI's am62p5 Soc (Bryan Brattlof)

   - Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
     Fainelli)

   - Update Kconfig to mention i.MX7 as well (Alexander Stein)

   - Revise global turbo disable check in intel_pstate (Srinivas
     Pandruvada)

   - Carry out initialization of sg_cpu in the schedutil cpufreq
     governor in one loop (Liao Chang)

   - Simplify the condition for storing 'down_threshold' in the
     conservative cpufreq governor (Liao Chang)

   - Use fine-grained mutex in the userspace cpufreq governor (Liao
     Chang)

   - Move is_managed indicator in the userspace cpufreq governor into a
     per-policy structure (Liao Chang)

   - Rebuild sched-domains when removing cpufreq driver (Pierre Gondois)

   - Fix buffer overflow detection in trans_stats() (Christian Marangi)

   - Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to
     support specific devices like UFS which handle multiple clocks
     through OPP (Operating Performance Point) framework (Manivannan
     Sadhasivam)

   - Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq-
     event driver:
      * Generalize rockchip-dfi.c to support new RK3568/RK3588 using
        different DDR type (Sascha Hauer).
      * Convert DT binding document format to yaml (Sascha Hauer).
      * Add perf support for DFI (a unit suitable for measuring DDR
        utilization) to rockchip-dfi.c to extend DFI usage (Sascha
        Hauer)

   - Add locking to the OPP handling code in the Mediatek CCI devfreq
     driver, because the voltage of shared OPP might be changed by
     multiple drivers (Mark Tseng, Dan Carpenter)

   - Use device_get_match_data() in the Samsung Exynos PPMU
     devfreq-event driver (Rob Herring)

   - Extend support for the opp-level beyond required-opps (Ulf Hansson)

   - Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru)

   - dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm
     Krait SoCs and document named opp-microvolt property (Bjorn
     Andersson, Dmitry Baryshkov and Christian Marangi)

   - Fix -Wunsequenced warning _of_add_opp_table_v1() (Nathan
     Chancellor)

   - General cleanup of OPP code (Viresh Kumar)

   - Use __get_safe_page() rather than touching the list in hibernation
     snapshot code (Brian Geffon)

   - Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav)

   - Clean up sync_read handling in snapshot_write_next() (Brian Geffon)

   - Fix kerneldoc comments for swsusp_check() and swsusp_close() to
     better match code (Christoph Hellwig)

   - Downgrade BIOS locked limits pr_warn() in the Intel RAPL power
     capping driver to pr_debug() (Ville Syrjälä)

   - Change the minimum python version for the intel_pstate_tracer
     utility from 2.7 to 3.6 (Doug Smythies)"

* tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits)
  dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware
  cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT
  cpufreq: qcom-nvmem: add support for IPQ8064
  cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
  cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
  cpufreq: qcom-nvmem: add support for IPQ6018
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018
  cpufreq: qcom-nvmem: Add MSM8909
  cpufreq: qcom-nvmem: Simplify driver data allocation
  powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug()
  cpufreq: stats: Fix buffer overflow detection in trans_stats()
  dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support
  dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support
  dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml
  PM / devfreq: rockchip-dfi: add support for RK3588
  PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers
  PM / devfreq: rockchip-dfi: make register stride SoC specific
  PM / devfreq: rockchip-dfi: Add perf support
  PM / devfreq: rockchip-dfi: give variable a better name
  ...

Author: torvalds

Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml

@@ -23,6 +23,7 @@ properties:
           - enum:
               - qcom,qcm2290-cpufreq-hw
               - qcom,sc7180-cpufreq-hw
+              - qcom,sdm670-cpufreq-hw
               - qcom,sdm845-cpufreq-hw
               - qcom,sm6115-cpufreq-hw
               - qcom,sm6350-cpufreq-hw
@@ -36,11 +37,13 @@ properties:
               - qcom,sa8775p-cpufreq-epss
               - qcom,sc7280-cpufreq-epss
               - qcom,sc8280xp-cpufreq-epss
+              - qcom,sdx75-cpufreq-epss
               - qcom,sm6375-cpufreq-epss
               - qcom,sm8250-cpufreq-epss
               - qcom,sm8350-cpufreq-epss
               - qcom,sm8450-cpufreq-epss
               - qcom,sm8550-cpufreq-epss
+              - qcom,sm8650-cpufreq-epss
           - const: qcom,cpufreq-epss
 
   reg:
@@ -128,6 +131,7 @@ allOf:
               - qcom,qdu1000-cpufreq-epss
               - qcom,sc7180-cpufreq-hw
               - qcom,sc8280xp-cpufreq-epss
+              - qcom,sdm670-cpufreq-hw
               - qcom,sdm845-cpufreq-hw
               - qcom,sm6115-cpufreq-hw
               - qcom,sm6350-cpufreq-hw

Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml

@@ -27,8 +27,12 @@ select:
         enum:
           - qcom,apq8064
           - qcom,apq8096
+          - qcom,ipq5332
+          - qcom,ipq6018
           - qcom,ipq8064
           - qcom,ipq8074
+          - qcom,ipq9574
+          - qcom,msm8909
           - qcom,msm8939
           - qcom,msm8960
           - qcom,msm8974
@@ -43,7 +47,9 @@ patternProperties:
       - if:
           properties:
             compatible:
-              const: operating-points-v2-kryo-cpu
+              enum:
+                - operating-points-v2-krait-cpu
+                - operating-points-v2-kryo-cpu
         then:
           $ref: /schemas/opp/opp-v2-kryo-cpu.yaml#
 

Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/event/rockchip,dfi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DFI
+
+maintainers:
+  - Sascha Hauer <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-dfi
+      - rockchip,rk3568-dfi
+      - rockchip,rk3588-dfi
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk_ddr_mon
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  reg:
+    maxItems: 1
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "PMU general register files".
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3399-dfi
+
+then:
+  required:
+    - clocks
+    - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3308-cru.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      dfi: dfi@ff630000 {
+        compatible = "rockchip,rk3399-dfi";
+        reg = <0x00 0xff630000 0x00 0x4000>;
+        interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+        rockchip,pmu = <&pmugrf>;
+        clocks = <&cru PCLK_DDR_MON>;
+        clock-names = "pclk_ddr_mon";
+      };
+    };

Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt

@@ -18,7 +18,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Node to get DDR loading. Refer to
-      Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt.
+      Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml.
 
   clocks:
     maxItems: 1

Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml

@@ -26,7 +26,9 @@ description: |
 
 properties:
   compatible:
-    const: operating-points-v2-kryo-cpu
+    enum:
+      - operating-points-v2-krait-cpu
+      - operating-points-v2-kryo-cpu
 
   nvmem-cells:
     description: |
@@ -47,6 +49,8 @@ patternProperties:
 
       opp-microvolt: true
 
+      opp-peak-kBps: true
+
       opp-supported-hw:
         description: |
           A single 32 bit bitmap value, representing compatible HW.
@@ -63,14 +67,22 @@ patternProperties:
           5:  MSM8996SG, speedbin 1
           6:  MSM8996SG, speedbin 2
           7-31:  unused
-        enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
-               0x9, 0xd, 0xe, 0xf,
-               0x10, 0x20, 0x30, 0x70]
+
+          Bitmap for IPQ806x SoC:
+          0:  IPQ8062
+          1:  IPQ8064/IPQ8066/IPQ8068
+          2:  IPQ8065/IPQ8069
+          3-31:  unused
+
+          Other platforms use bits directly corresponding to speedbin index.
 
       clock-latency-ns: true
 
       required-opps: true
 
+    patternProperties:
+      '^opp-microvolt-speed[0-9]+-pvs[0-9]+$': true
+
     required:
       - opp-hz
 
@@ -256,6 +268,22 @@ examples:
             };
         };
 
+        /* Dummy opp table to give example for named opp-microvolt */
+        opp-table-2 {
+            compatible = "operating-points-v2-krait-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+
+            opp-384000000 {
+                opp-hz = /bits/ 64 <384000000>;
+                opp-microvolt-speed0-pvs0 = <1000000 950000 1050000>;
+                opp-microvolt-speed0-pvs1 = <925000 878750 971250>;
+                opp-microvolt-speed0-pvs2 = <875000 831250 918750>;
+                opp-microvolt-speed0-pvs3 = <800000 760000 840000>;
+                opp-supported-hw = <0x7>;
+                clock-latency-ns = <100000>;
+            };
+        };
+
         smem {
             compatible = "qcom,smem";
             memory-region = <&smem_mem>;

Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml

@@ -228,3 +228,24 @@ void dev_pm_domain_set(struct device *dev, struct dev_pm_domain *pd)
 	device_pm_check_callbacks(dev);
 }
 EXPORT_SYMBOL_GPL(dev_pm_domain_set);
+
+/**
+ * dev_pm_domain_set_performance_state - Request a new performance state.
+ * @dev: The device to make the request for.
+ * @state: Target performance state for the device.
+ *
+ * This function should be called when a new performance state needs to be
+ * requested for a device that is attached to a PM domain. Note that, the
+ * support for performance scaling for PM domains is optional.
+ *
+ * Returns 0 on success and when performance scaling isn't supported, negative
+ * error code on failure.
+ */
+int dev_pm_domain_set_performance_state(struct device *dev, unsigned int state)
+{
+	if (dev->pm_domain && dev->pm_domain->set_performance_state)
+		return dev->pm_domain->set_performance_state(dev, state);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_domain_set_performance_state);

drivers/base/power/common.c

@@ -419,6 +419,25 @@ static void genpd_restore_performance_state(struct device *dev,
 		genpd_set_performance_state(dev, state);
 }
 
+static int genpd_dev_pm_set_performance_state(struct device *dev,
+					      unsigned int state)
+{
+	struct generic_pm_domain *genpd = dev_to_genpd(dev);
+	int ret = 0;
+
+	genpd_lock(genpd);
+	if (pm_runtime_suspended(dev)) {
+		dev_gpd_data(dev)->rpm_pstate = state;
+	} else {
+		ret = genpd_set_performance_state(dev, state);
+		if (!ret)
+			dev_gpd_data(dev)->rpm_pstate = 0;
+	}
+	genpd_unlock(genpd);
+
+	return ret;
+}
+
 /**
  * dev_pm_genpd_set_performance_state- Set performance state of device's power
  * domain.
@@ -437,7 +456,6 @@ static void genpd_restore_performance_state(struct device *dev,
 int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state)
 {
 	struct generic_pm_domain *genpd;
-	int ret = 0;
 
 	genpd = dev_to_genpd_safe(dev);
 	if (!genpd)
@@ -447,17 +465,7 @@ int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state)
 		     !dev->power.subsys_data->domain_data))
 		return -EINVAL;
 
-	genpd_lock(genpd);
-	if (pm_runtime_suspended(dev)) {
-		dev_gpd_data(dev)->rpm_pstate = state;
-	} else {
-		ret = genpd_set_performance_state(dev, state);
-		if (!ret)
-			dev_gpd_data(dev)->rpm_pstate = 0;
-	}
-	genpd_unlock(genpd);
-
-	return ret;
+	return genpd_dev_pm_set_performance_state(dev, state);
 }
 EXPORT_SYMBOL_GPL(dev_pm_genpd_set_performance_state);
 
@@ -2079,6 +2087,7 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
 	genpd->domain.ops.restore_noirq = genpd_restore_noirq;
 	genpd->domain.ops.complete = genpd_complete;
 	genpd->domain.start = genpd_dev_pm_start;
+	genpd->domain.set_performance_state = genpd_dev_pm_set_performance_state;
 
 	if (genpd->flags & GENPD_FLAG_PM_CLK) {
 		genpd->dev_ops.stop = pm_clk_suspend;

drivers/base/power/domain.c

@@ -90,7 +90,7 @@ config ARM_VEXPRESS_SPC_CPUFREQ
 
 config ARM_BRCMSTB_AVS_CPUFREQ
 	tristate "Broadcom STB AVS CPUfreq driver"
-	depends on ARCH_BRCMSTB || COMPILE_TEST
+	depends on (ARCH_BRCMSTB && !ARM_SCMI_CPUFREQ) || COMPILE_TEST
 	default y
 	help
 	  Some Broadcom STB SoCs use a co-processor running proprietary firmware
@@ -124,8 +124,8 @@ config ARM_IMX_CPUFREQ_DT
 	tristate "Freescale i.MX8M cpufreq support"
 	depends on ARCH_MXC && CPUFREQ_DT
 	help
-	  This adds cpufreq driver support for Freescale i.MX8M series SoCs,
-	  based on cpufreq-dt.
+	  This adds cpufreq driver support for Freescale i.MX7/i.MX8M
+	  series SoCs, based on cpufreq-dt.
 
 	  If in doubt, say N.
 

drivers/cpufreq/Kconfig.arm

@@ -142,9 +142,11 @@ static const struct of_device_id blocklist[] __initconst = {
 	{ .compatible = "nvidia,tegra234", },
 
 	{ .compatible = "qcom,apq8096", },
+	{ .compatible = "qcom,msm8909", },
 	{ .compatible = "qcom,msm8996", },
 	{ .compatible = "qcom,msm8998", },
 	{ .compatible = "qcom,qcm2290", },
+	{ .compatible = "qcom,qcm6490", },
 	{ .compatible = "qcom,qcs404", },
 	{ .compatible = "qcom,qdu1000", },
 	{ .compatible = "qcom,sa8155p" },
@@ -176,7 +178,9 @@ static const struct of_device_id blocklist[] __initconst = {
 	{ .compatible = "ti,omap3", },
 	{ .compatible = "ti,am625", },
 	{ .compatible = "ti,am62a7", },
+	{ .compatible = "ti,am62p5", },
 
+	{ .compatible = "qcom,ipq6018", },
 	{ .compatible = "qcom,ipq8064", },
 	{ .compatible = "qcom,apq8064", },
 	{ .compatible = "qcom,msm8974", },