Merge tag 'spi-nor/for-6.14' into mtd/next

SPI NOR changes for 6.14

Notable changes:

- Add flash entries for Atmel AT25SF321, Spansion S28HL256T, S28HL02GT.

- Add support for vcc-supply regulators and their DT bindings.

- Drop mx25u25635f entry. The flash shares its ID with mx25u25645g and
  both parts have an SFDP table. Removing their entry lets them be
  driven by the generic SFDP-based driver.

Author: miquelraynal

Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml

@@ -96,6 +96,10 @@ properties:
       If "broken-flash-reset" is present then having this property does not
       make any difference.
 
+  vcc-supply:
+    description:
+      Supply for the SPI NOR power.
+
   spi-cpol: true
   spi-cpha: true
 

drivers/mtd/spi-nor/atmel.c

@@ -238,6 +238,10 @@ static const struct flash_info atmel_nor_parts[] = {
 		.flags = SPI_NOR_HAS_LOCK,
 		.no_sfdp_flags = SECT_4K,
 		.fixups = &at25fs_nor_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x87, 0x01),
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	},
 };
 

drivers/mtd/spi-nor/core.c

@@ -17,6 +17,7 @@
 #include <linux/mtd/spi-nor.h>
 #include <linux/mutex.h>
 #include <linux/of_platform.h>
+#include <linux/regulator/consumer.h>
 #include <linux/sched/task_stack.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
@@ -3576,7 +3577,8 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
 static int spi_nor_probe(struct spi_mem *spimem)
 {
 	struct spi_device *spi = spimem->spi;
-	struct flash_platform_data *data = dev_get_platdata(&spi->dev);
+	struct device *dev = &spi->dev;
+	struct flash_platform_data *data = dev_get_platdata(dev);
 	struct spi_nor *nor;
 	/*
 	 * Enable all caps by default. The core will mask them after
@@ -3586,13 +3588,17 @@ static int spi_nor_probe(struct spi_mem *spimem)
 	char *flash_name;
 	int ret;
 
-	nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL);
+	ret = devm_regulator_get_enable(dev, "vcc");
+	if (ret)
+		return ret;
+
+	nor = devm_kzalloc(dev, sizeof(*nor), GFP_KERNEL);
 	if (!nor)
 		return -ENOMEM;
 
 	nor->spimem = spimem;
-	nor->dev = &spi->dev;
-	spi_nor_set_flash_node(nor, spi->dev.of_node);
+	nor->dev = dev;
+	spi_nor_set_flash_node(nor, dev->of_node);
 
 	spi_mem_set_drvdata(spimem, nor);
 
@@ -3628,9 +3634,8 @@ static int spi_nor_probe(struct spi_mem *spimem)
 	 */
 	if (nor->params->page_size > PAGE_SIZE) {
 		nor->bouncebuf_size = nor->params->page_size;
-		devm_kfree(nor->dev, nor->bouncebuf);
-		nor->bouncebuf = devm_kmalloc(nor->dev,
-					      nor->bouncebuf_size,
+		devm_kfree(dev, nor->bouncebuf);
+		nor->bouncebuf = devm_kmalloc(dev, nor->bouncebuf_size,
 					      GFP_KERNEL);
 		if (!nor->bouncebuf)
 			return -ENOMEM;

drivers/mtd/spi-nor/core.h

@@ -448,7 +448,11 @@ struct spi_nor_id {
  * @id:   pointer to struct spi_nor_id or NULL, which means "no ID" (mostly
  *        older chips).
  * @name: (obsolete) the name of the flash. Do not set it for new additions.
- * @size:           the size of the flash in bytes.
+ * @size:           the size of the flash in bytes. The flash size is one
+ *                  property parsed by the SFDP. We use it as an indicator
+ *                  whether we need SFDP parsing for a particular flash.
+ *                  I.e. non-legacy flash entries in flash_info will have
+ *                  a size of zero iff SFDP should be used.
  * @sector_size:    (optional) the size listed here is what works with
  *                  SPINOR_OP_SE, which isn't necessarily called a "sector" by
  *                  the vendor. Defaults to 64k.

drivers/mtd/spi-nor/macronix.c

@@ -142,12 +142,6 @@ static const struct flash_info macronix_nor_parts[] = {
 		.name = "mx25u12835f",
 		.size = SZ_16M,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0xc2, 0x25, 0x39),
-		.name = "mx25u25635f",
-		.size = SZ_32M,
-		.no_sfdp_flags = SECT_4K,
-		.fixup_flags = SPI_NOR_4B_OPCODES,
 	}, {
 		.id = SNOR_ID(0xc2, 0x25, 0x3a),
 		.name = "mx25u51245g",
@@ -230,7 +224,8 @@ static int macronix_nor_octal_dtr_en(struct spi_nor *nor)
 		return ret;
 
 	/* Read flash ID to make sure the switch was successful. */
-	ret = spi_nor_read_id(nor, 4, 4, buf, SNOR_PROTO_8_8_8_DTR);
+	ret = spi_nor_read_id(nor, nor->addr_nbytes, 4, buf,
+			      SNOR_PROTO_8_8_8_DTR);
 	if (ret) {
 		dev_dbg(nor->dev, "error %d reading JEDEC ID after enabling 8D-8D-8D mode\n", ret);
 		return ret;

drivers/mtd/spi-nor/spansion.c

@@ -957,6 +957,11 @@ static const struct flash_info spansion_nor_parts[] = {
 		.name = "s25hs02gt",
 		.mfr_flags = USE_CLPEF,
 		.fixups = &s25hx_t_fixups
+	}, {
+		/* S28HL256T */
+		.id = SNOR_ID(0x34, 0x5a, 0x19),
+		.mfr_flags = USE_CLPEF,
+		.fixups = &s28hx_t_fixups,
 	}, {
 		.id = SNOR_ID(0x34, 0x5a, 0x1a),
 		.name = "s28hl512t",
@@ -967,6 +972,11 @@ static const struct flash_info spansion_nor_parts[] = {
 		.name = "s28hl01gt",
 		.mfr_flags = USE_CLPEF,
 		.fixups = &s28hx_t_fixups,
+	}, {
+		/* S28HL02GT */
+		.id = SNOR_ID(0x34, 0x5a, 0x1c),
+		.mfr_flags = USE_CLPEF,
+		.fixups = &s28hx_t_fixups,
 	}, {
 		.id = SNOR_ID(0x34, 0x5b, 0x19),
 		.mfr_flags = USE_CLPEF,

drivers/mtd/spi-nor/sysfs.c

@@ -50,7 +50,7 @@ static struct attribute *spi_nor_sysfs_entries[] = {
 };
 
 static ssize_t sfdp_read(struct file *filp, struct kobject *kobj,
-			 struct bin_attribute *bin_attr, char *buf,
+			 const struct bin_attribute *bin_attr, char *buf,
 			 loff_t off, size_t count)
 {
 	struct spi_device *spi = to_spi_device(kobj_to_dev(kobj));
@@ -62,9 +62,9 @@ static ssize_t sfdp_read(struct file *filp, struct kobject *kobj,
 	return memory_read_from_buffer(buf, count, &off, nor->sfdp->dwords,
 				       sfdp_size);
 }
-static BIN_ATTR_RO(sfdp, 0);
+static const BIN_ATTR_RO(sfdp, 0);
 
-static struct bin_attribute *spi_nor_sysfs_bin_entries[] = {
+static const struct bin_attribute *const spi_nor_sysfs_bin_entries[] = {
 	&bin_attr_sfdp,
 	NULL
 };
@@ -104,7 +104,7 @@ static const struct attribute_group spi_nor_sysfs_group = {
 	.is_visible	= spi_nor_sysfs_is_visible,
 	.is_bin_visible	= spi_nor_sysfs_is_bin_visible,
 	.attrs		= spi_nor_sysfs_entries,
-	.bin_attrs	= spi_nor_sysfs_bin_entries,
+	.bin_attrs_new	= spi_nor_sysfs_bin_entries,
 };
 
 const struct attribute_group *spi_nor_sysfs_groups[] = {