iommu/vt-d: Drain PRQs when domain removed from RID

As this iommu driver now supports page faults for requests without
PASID, page requests should be drained when a domain is removed from
the RID2PASID entry.

This results in the intel_iommu_drain_pasid_prq() call being moved to
intel_pasid_tear_down_entry(). This indicates that when a translation
is removed from any PASID entry and the PRI has been enabled on the
device, page requests are drained in the domain detachment path.

The intel_iommu_drain_pasid_prq() helper has been modified to support
sending device TLB invalidation requests for both PASID and non-PASID
cases.

Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Yi Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>

Author: LuBaolu

drivers/iommu/intel/iommu.c

@@ -4067,7 +4067,6 @@ static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
 	intel_iommu_debugfs_remove_dev_pasid(dev_pasid);
 	kfree(dev_pasid);
 	intel_pasid_tear_down_entry(iommu, dev, pasid, false);
-	intel_iommu_drain_pasid_prq(dev, pasid);
 }
 
 static int intel_iommu_set_dev_pasid(struct iommu_domain *domain,

drivers/iommu/intel/pasid.c

@@ -265,6 +265,7 @@ void intel_pasid_tear_down_entry(struct intel_iommu *iommu, struct device *dev,
 		iommu->flush.flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH);
 
 	devtlb_invalidation_with_pasid(iommu, dev, pasid);
+	intel_iommu_drain_pasid_prq(dev, pasid);
 }
 
 /*

drivers/iommu/intel/prq.c

@@ -63,26 +63,18 @@ void intel_iommu_drain_pasid_prq(struct device *dev, u32 pasid)
 	struct dmar_domain *domain;
 	struct intel_iommu *iommu;
 	struct qi_desc desc[3];
-	struct pci_dev *pdev;
 	int head, tail;
 	u16 sid, did;
-	int qdep;
 
 	info = dev_iommu_priv_get(dev);
-	if (WARN_ON(!info || !dev_is_pci(dev)))
-		return;
-
 	if (!info->pri_enabled)
 		return;
 
 	iommu = info->iommu;
 	domain = info->domain;
-	pdev = to_pci_dev(dev);
 	sid = PCI_DEVID(info->bus, info->devfn);
 	did = domain ? domain_id_iommu(domain, iommu) : FLPT_DEFAULT_DID;
 
-	qdep = pci_ats_queue_depth(pdev);
-
 	/*
 	 * Check and wait until all pending page requests in the queue are
 	 * handled by the prq handling thread.
@@ -114,15 +106,15 @@ void intel_iommu_drain_pasid_prq(struct device *dev, u32 pasid)
 	desc[0].qw0 = QI_IWD_STATUS_DATA(QI_DONE) |
 			QI_IWD_FENCE |
 			QI_IWD_TYPE;
-	desc[1].qw0 = QI_EIOTLB_PASID(pasid) |
-			QI_EIOTLB_DID(did) |
-			QI_EIOTLB_GRAN(QI_GRAN_NONG_PASID) |
-			QI_EIOTLB_TYPE;
-	desc[2].qw0 = QI_DEV_EIOTLB_PASID(pasid) |
-			QI_DEV_EIOTLB_SID(sid) |
-			QI_DEV_EIOTLB_QDEP(qdep) |
-			QI_DEIOTLB_TYPE |
-			QI_DEV_IOTLB_PFSID(info->pfsid);
+	if (pasid == IOMMU_NO_PASID) {
+		qi_desc_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH, &desc[1]);
+		qi_desc_dev_iotlb(sid, info->pfsid, info->ats_qdep, 0,
+				  MAX_AGAW_PFN_WIDTH, &desc[2]);
+	} else {
+		qi_desc_piotlb(did, pasid, 0, -1, 0, &desc[1]);
+		qi_desc_dev_iotlb_pasid(sid, info->pfsid, pasid, info->ats_qdep,
+					0, MAX_AGAW_PFN_WIDTH, &desc[2]);
+	}
 qi_retry:
 	reinit_completion(&iommu->prq_complete);
 	qi_submit_sync(iommu, desc, 3, QI_OPT_WAIT_DRAIN);