Merge tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Ilpo Järvinen:
 "acer-wmi:
   - Add support for PH14-51, PH16-72, and Nitro AN515-58
   - Add proper hwmon support
   - Improve error handling when reading "gaming system info"
   - Replace direct EC reads for the current platform profile with WMI
     calls to handle EC address variations
   - Replace custom platform_profile cycling with the generic one

  ACPI:
   - platform_profile: Major refactoring and improvements
   - Support registering multiple platform_profile handlers concurrently
     to avoid the need to quirk which handler takes precedence
   - Support reporting "custom" profile for cases where the current
     profile is ambiguous or when settings tweaks are done outside the
     pre-defined profile
   - Abstract and layer platform_profile API better using the class_dev
     and drvdata
   - Various minor improvements
   - Add Documentation and kerneldoc

  amd/hsmp:
   - Add support for HSMP protocol v7

  amd/pmc:
   - Support AMD 1Ah family 70h
   - Support STB with Ryzen desktop SoCs

  amd/pmf:
   - Support Custom BIOS inputs for PMF TA
   - Support passing SRA sensor data from AMD SFH (HID) to PMF TA

  dell-smo8800:
   - Move SMO88xx quirk away from the generic i2c-i801 driver
   - Add accelerometer support for Dell Latitude E6330/E6430 and XPS
     9550
   - Support probing accelerometer for models yet to be listed in the
     DMI mapping table because ACPI lacks i2c-address for the
     accelerometer (behind a module parameter because probing might be
     dangerous)

  HID:
   - amd_sfh: Add support for exporting SRA sensor data

  hp-wmi:
   - Add fan and thermal support for Victus 16-s1000

  input:
   - Add key for phone linking
   - i8042: Add context for the i8042 filter to enable cleaning up the
     filter related global variables from pdx86 drivers

  lenovo-wmi-camera:
   - Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS

  mellanox mlxbf-pmc:
   - Add support for monitoring cycle count
   - Add Documentation

  thinkpad_acpi:
   - Add support for phone link key

  tools/power/x86/intel-speed-select:
   - Fix Turbo Ratio Limit restore

  x86-android-tables:
   - Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver

  And miscellaneous cleanups / refactoring / improvements"

* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
  platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
  platform/x86: acer-wmi: Ignore AC events
  platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
  platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
  platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
  platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
  ACPI: platform_profile: Add a prefix to log messages
  ACPI: platform_profile: Add documentation
  ACPI: platform_profile: Clean platform_profile_handler
  ACPI: platform_profile: Move platform_profile_handler
  ACPI: platform_profile: Remove platform_profile_handler from exported symbols
  platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
  platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
  platform/x86: hp-wmi: Use devm_platform_profile_register()
  platform/x86: ideapad-laptop: Use devm_platform_profile_register()
  platform/x86: dell-pc: Use devm_platform_profile_register()
  platform/x86: asus-wmi: Use devm_platform_profile_register()
  platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
  platform/x86: acer-wmi: Use devm_platform_profile_register()
  platform/surface: surface_platform_profile: Use devm_platform_profile_register()
  ...

Author: torvalds

Documentation/ABI/testing/sysfs-class-platform-profile

@@ -0,0 +1,48 @@
+What:		/sys/class/platform-profile/platform-profile-X/name
+Date:		March 2025
+KernelVersion:	6.14
+Description:	Name of the class device given by the driver.
+
+		RO
+
+What:		/sys/class/platform-profile/platform-profile-X/choices
+Date:		March 2025
+KernelVersion:	6.14
+Description:	This file contains a space-separated list of profiles supported
+		for this device.
+
+		Drivers must use the following standard profile-names:
+
+		====================	========================================
+		low-power		Low power consumption
+		cool			Cooler operation
+		quiet			Quieter operation
+		balanced		Balance between low power consumption
+					and performance
+		balanced-performance	Balance between performance and low
+					power consumption with a slight bias
+					towards performance
+		performance		High performance operation
+		custom			Driver defined custom profile
+		====================	========================================
+
+		RO
+
+What:		/sys/class/platform-profile/platform-profile-X/profile
+Date:		March 2025
+KernelVersion:	6.14
+Description:	Reading this file gives the current selected profile for this
+		device. Writing this file with one of the strings from
+		platform_profile_choices changes the profile to the new value.
+
+		This file can be monitored for changes by polling for POLLPRI,
+		POLLPRI will be signaled on any changes, independent of those
+		changes coming from a userspace write; or coming from another
+		source such as e.g. a hotkey triggered profile change handled
+		either directly by the embedded-controller or fully handled
+		inside the kernel.
+
+		This file may also emit the string 'custom' to indicate
+		that the driver is using a driver defined custom profile.
+
+		RW

Documentation/ABI/testing/sysfs-platform-mellanox-pmc

@@ -0,0 +1,64 @@
+HID           Driver         Description
+MLNXBFD0      mlxbf-pmc      Performance counters (BlueField-1)
+MLNXBFD1      mlxbf-pmc      Performance counters (BlueField-2)
+MLNXBFD2      mlxbf-pmc      Performance counters (BlueField-3)
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/event_list
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		List of events supported by the counters in the specific block.
+		It is used to extract the event number or ID associated with
+		each event.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/event<N>
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Event monitored by corresponding counter. This is used to
+		program or read back the event that should be or is currently
+		being monitored by counter<N>.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/counter<N>
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Counter value of the event being monitored. This is used to
+		read the counter value of the event which was programmed using
+		event<N>. This is also used to clear or reset the counter value
+		by writing 0 to the counter sysfs.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/enable
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Start or stop counters. This is used to start the counters
+		for monitoring the programmed events and also to stop the
+		counters after the desired duration. Writing value 1 will
+		start all the counters in the block, and writing 0 will
+		stop all the counters together.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/<reg>
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Value of register. This is used to read or reset the registers
+		where various performance statistics are counted for each block.
+		Writing 0 to the sysfs will clear the counter, writing any other
+		value is not allowed.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/count_clock
+Date:		Mar 2025
+KernelVersion:	6.14
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Use a counter for counting cycles. This is used to repurpose/dedicate
+		any of the counters in the block to counting cycles. Each counter is
+		represented by a bit (bit 0 for counter0, bit1 for counter1 and so on)
+		and setting the corresponding bit will reserve that specific counter
+		for counting cycles and override the event<N> setting.

Documentation/ABI/testing/sysfs-platform_profile

@@ -33,3 +33,8 @@ Description:	Reading this file gives the current selected profile for this
 		source such as e.g. a hotkey triggered profile change handled
 		either directly by the embedded-controller or fully handled
 		inside the kernel.
+
+		This file may also emit the string 'custom' to indicate
+		that multiple platform profiles drivers are in use but
+		have different values.  This string can not be written to
+		this interface and is solely for informational purposes.

Documentation/userspace-api/sysfs-platform_profile.rst

@@ -40,3 +40,41 @@ added. Drivers which wish to introduce new profile names must:
  1. Explain why the existing profile names cannot be used.
  2. Add the new profile name, along with a clear description of the
     expected behaviour, to the sysfs-platform_profile ABI documentation.
+
+"Custom" profile support
+========================
+The platform_profile class also supports profiles advertising a "custom"
+profile. This is intended to be set by drivers when the setttings in the
+driver have been modified in a way that a standard profile doesn't represent
+the current state.
+
+Multiple driver support
+=======================
+When multiple drivers on a system advertise a platform profile handler, the
+platform profile handler core will only advertise the profiles that are
+common between all drivers to the ``/sys/firmware/acpi`` interfaces.
+
+This is to ensure there is no ambiguity on what the profile names mean when
+all handlers don't support a profile.
+
+Individual drivers will register a 'platform_profile' class device that has
+similar semantics as the ``/sys/firmware/acpi/platform_profile`` interface.
+
+To discover which driver is associated with a platform profile handler the
+user can read the ``name`` attribute of the class device.
+
+To discover available profiles from the class interface the user can read the
+``choices`` attribute.
+
+If a user wants to select a profile for a specific driver, they can do so
+by writing to the ``profile`` attribute of the driver's class device.
+
+This will allow users to set different profiles for different drivers on the
+same system. If the selected profile by individual drivers differs the
+platform profile handler core will display the profile 'custom' to indicate
+that the profiles are not the same.
+
+While the ``platform_profile`` attribute has the value ``custom``, writing a
+common profile from ``platform_profile_choices`` to the platform_profile
+attribute of the platform profile handler core will set the profile for all
+drivers.

Documentation/wmi/driver-development-guide.rst

@@ -41,6 +41,10 @@ helps in understanding how the WMI device is supposed to work. The path of the A
 method associated with a given WMI device can be retrieved using the ``lswmi`` utility
 as mentioned above.
 
+If you are attempting to port a driver to Linux and are working on a Windows
+system, `WMIExplorer <https://github.com/vinaypamnani/wmie2>`_ can be useful
+for inspecting available WMI methods and invoking them directly.
+
 Basic WMI driver structure
 --------------------------
 

MAINTAINERS

@@ -1148,7 +1148,7 @@ F:	include/linux/pds/
 AMD PMC DRIVER
 M:	Shyam Sundar S K <[email protected]>
 L:	[email protected]
-S:	Maintained
+S:	Supported
 F:	drivers/platform/x86/amd/pmc/
 
 AMD PMF DRIVER

arch/x86/include/asm/intel_punit_ipc.h

@@ -80,17 +80,10 @@ typedef enum {
 
 #if IS_ENABLED(CONFIG_INTEL_PUNIT_IPC)
 
-int intel_punit_ipc_simple_command(int cmd, int para1, int para2);
 int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out);
 
 #else
 
-static inline int intel_punit_ipc_simple_command(int cmd,
-						  int para1, int para2)
-{
-	return -ENODEV;
-}
-
 static inline int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2,
 					  u32 *in, u32 *out)
 {

arch/x86/include/uapi/asm/amd_hsmp.h

@@ -50,6 +50,12 @@ enum hsmp_message_ids {
 	HSMP_GET_METRIC_TABLE_VER,	/* 23h Get metrics table version */
 	HSMP_GET_METRIC_TABLE,		/* 24h Get metrics table */
 	HSMP_GET_METRIC_TABLE_DRAM_ADDR,/* 25h Get metrics table dram address */
+	HSMP_SET_XGMI_PSTATE_RANGE,	/* 26h Set xGMI P-state range */
+	HSMP_CPU_RAIL_ISO_FREQ_POLICY,	/* 27h Get/Set Cpu Iso frequency policy */
+	HSMP_DFC_ENABLE_CTRL,		/* 28h Enable/Disable DF C-state */
+	HSMP_GET_RAPL_UNITS = 0x30,	/* 30h Get scaling factor for energy */
+	HSMP_GET_RAPL_CORE_COUNTER,	/* 31h Get core energy counter value */
+	HSMP_GET_RAPL_PACKAGE_COUNTER,	/* 32h Get package energy counter value */
 	HSMP_MSG_ID_MAX,
 };
 
@@ -65,14 +71,16 @@ enum hsmp_msg_type {
 	HSMP_RSVD = -1,
 	HSMP_SET  = 0,
 	HSMP_GET  = 1,
+	HSMP_SET_GET	= 2,
 };
 
 enum hsmp_proto_versions {
 	HSMP_PROTO_VER2	= 2,
 	HSMP_PROTO_VER3,
 	HSMP_PROTO_VER4,
 	HSMP_PROTO_VER5,
-	HSMP_PROTO_VER6
+	HSMP_PROTO_VER6,
+	HSMP_PROTO_VER7
 };
 
 struct hsmp_msg_desc {
@@ -300,7 +308,7 @@ static const struct hsmp_msg_desc hsmp_msg_desc_table[]
 	 * HSMP_SET_POWER_MODE, num_args = 1, response_sz = 0
 	 * input: args[0] = power efficiency mode[2:0]
 	 */
-	{1, 0, HSMP_SET},
+	{1, 1, HSMP_SET_GET},
 
 	/*
 	 * HSMP_SET_PSTATE_MAX_MIN, num_args = 1, response_sz = 0
@@ -325,6 +333,58 @@ static const struct hsmp_msg_desc hsmp_msg_desc_table[]
 	 * output: args[1] = upper 32 bits of the address
 	 */
 	{0, 2, HSMP_GET},
+
+	/*
+	 * HSMP_SET_XGMI_PSTATE_RANGE, num_args = 1, response_sz = 0
+	 * input: args[0] = min xGMI p-state[15:8] + max xGMI p-state[7:0]
+	 */
+	{1, 0, HSMP_SET},
+
+	/*
+	 * HSMP_CPU_RAIL_ISO_FREQ_POLICY, num_args = 1, response_sz = 1
+	 * input: args[0] = set/get policy[31] +
+	 * disable/enable independent control[0]
+	 * output: args[0] = current policy[0]
+	 */
+	{1, 1, HSMP_SET_GET},
+
+	/*
+	 * HSMP_DFC_ENABLE_CTRL, num_args = 1, response_sz = 1
+	 * input: args[0] = set/get policy[31] + enable/disable DFC[0]
+	 * output: args[0] = current policy[0]
+	 */
+	{1, 1, HSMP_SET_GET},
+
+	/* RESERVED(0x29-0x2f) */
+	{0, 0, HSMP_RSVD},
+	{0, 0, HSMP_RSVD},
+	{0, 0, HSMP_RSVD},
+	{0, 0, HSMP_RSVD},
+	{0, 0, HSMP_RSVD},
+	{0, 0, HSMP_RSVD},
+	{0, 0, HSMP_RSVD},
+
+	/*
+	 * HSMP_GET_RAPL_UNITS, response_sz = 1
+	 * output: args[0] = tu value[19:16] + esu value[12:8]
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_RAPL_CORE_COUNTER, num_args = 1, response_sz = 1
+	 * input: args[0] = apic id[15:0]
+	 * output: args[0] = lower 32 bits of energy
+	 * output: args[1] = upper 32 bits of energy
+	 */
+	{1, 2, HSMP_GET},
+
+	/*
+	 * HSMP_GET_RAPL_PACKAGE_COUNTER, num_args = 0, response_sz = 1
+	 * output: args[0] = lower 32 bits of energy
+	 * output: args[1] = upper 32 bits of energy
+	 */
+	{0, 2, HSMP_GET},
+
 };
 
 /* Metrics table (supported only with proto version 6) */