ASoC: stm32: sai: add a check on minimal kernel frequency

On MP2 SoCs SAI kernel clock rate is managed through
stm32_sai_set_parent_rate() function.
If the kernel clock rate was set previously to a low frequency, this
frequency may be too low to support the newly requested audio stream rate.
However the stm32_sai_rate_accurate() will only check accuracy against
the maximum kernel clock rate. The function will return leaving the kernel
clock rate unchanged.
Add a check on minimal frequency requirement, to avoid this.

Fixes: 2cfe1ff ("ASoC: stm32: sai: add stm32mp25 support")
Signed-off-by: Olivier Moysan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>

Author: Olivier Moysan

sound/soc/stm/stm32_sai_sub.c

@@ -447,7 +447,10 @@ static int stm32_sai_set_parent_rate(struct stm32_sai_sub_data *sai,
 	 * return immediately.
 	 */
 	sai_curr_rate = clk_get_rate(sai->sai_ck);
-	if (stm32_sai_rate_accurate(sai_ck_max_rate, sai_curr_rate))
+	dev_dbg(&pdev->dev, "kernel clock rate: min [%u], max [%u], current [%u]",
+		sai_ck_min_rate, sai_ck_max_rate, sai_curr_rate);
+	if (stm32_sai_rate_accurate(sai_ck_max_rate, sai_curr_rate) &&
+	    sai_curr_rate >= sai_ck_min_rate)
 		return 0;
 
 	/*