net: mdio: mdio-i2c: Add support for single-byte SMBus operations

PHYs that are within copper SFP modules have their MDIO bus accessible
through address 0x56 (usually) on the i2c bus. The MDIO-I2C bridge is
desgned for 16 bits accesses, but we can also perform 8bits accesses by
reading/writing the high and low bytes sequentially.

This commit adds support for this type of accesses, thus supporting
smbus controllers such as the one in the VSC8552.

This was only tested on Copper SFP modules that embed a Marvell 88e1111
PHY.

Tested-by: Sean Anderson <[email protected]>
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

Author: minimaxwell

drivers/net/mdio/mdio-i2c.c

@@ -106,6 +106,62 @@ static int i2c_mii_write_default_c22(struct mii_bus *bus, int phy_id, int reg,
 	return i2c_mii_write_default_c45(bus, phy_id, -1, reg, val);
 }
 
+static int smbus_byte_mii_read_default_c22(struct mii_bus *bus, int phy_id,
+					   int reg)
+{
+	struct i2c_adapter *i2c = bus->priv;
+	union i2c_smbus_data smbus_data;
+	int val = 0, ret;
+
+	if (!i2c_mii_valid_phy_id(phy_id))
+		return 0;
+
+	ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0,
+			     I2C_SMBUS_READ, reg,
+			     I2C_SMBUS_BYTE_DATA, &smbus_data);
+	if (ret < 0)
+		return ret;
+
+	val = (smbus_data.byte & 0xff) << 8;
+
+	ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0,
+			     I2C_SMBUS_READ, reg,
+			     I2C_SMBUS_BYTE_DATA, &smbus_data);
+	if (ret < 0)
+		return ret;
+
+	val |= smbus_data.byte & 0xff;
+
+	return val;
+}
+
+static int smbus_byte_mii_write_default_c22(struct mii_bus *bus, int phy_id,
+					    int reg, u16 val)
+{
+	struct i2c_adapter *i2c = bus->priv;
+	union i2c_smbus_data smbus_data;
+	int ret;
+
+	if (!i2c_mii_valid_phy_id(phy_id))
+		return 0;
+
+	smbus_data.byte = (val & 0xff00) >> 8;
+
+	ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0,
+			     I2C_SMBUS_WRITE, reg,
+			     I2C_SMBUS_BYTE_DATA, &smbus_data);
+	if (ret < 0)
+		return ret;
+
+	smbus_data.byte = val & 0xff;
+
+	ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0,
+			     I2C_SMBUS_WRITE, reg,
+			     I2C_SMBUS_BYTE_DATA, &smbus_data);
+
+	return ret < 0 ? ret : 0;
+}
+
 /* RollBall SFPs do not access internal PHY via I2C address 0x56, but
  * instead via address 0x51, when SFP page is set to 0x03 and password to
  * 0xffffffff.
@@ -378,13 +434,26 @@ static int i2c_mii_init_rollball(struct i2c_adapter *i2c)
 		return 0;
 }
 
+static bool mdio_i2c_check_functionality(struct i2c_adapter *i2c,
+					 enum mdio_i2c_proto protocol)
+{
+	if (i2c_check_functionality(i2c, I2C_FUNC_I2C))
+		return true;
+
+	if (i2c_check_functionality(i2c, I2C_FUNC_SMBUS_BYTE_DATA) &&
+	    protocol == MDIO_I2C_MARVELL_C22)
+		return true;
+
+	return false;
+}
+
 struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c,
 			       enum mdio_i2c_proto protocol)
 {
 	struct mii_bus *mii;
 	int ret;
 
-	if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
+	if (!mdio_i2c_check_functionality(i2c, protocol))
 		return ERR_PTR(-EINVAL);
 
 	mii = mdiobus_alloc();
@@ -395,6 +464,14 @@ struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c,
 	mii->parent = parent;
 	mii->priv = i2c;
 
+	/* Only use SMBus if we have no other choice */
+	if (i2c_check_functionality(i2c, I2C_FUNC_SMBUS_BYTE_DATA) &&
+	    !i2c_check_functionality(i2c, I2C_FUNC_I2C)) {
+		mii->read = smbus_byte_mii_read_default_c22;
+		mii->write = smbus_byte_mii_write_default_c22;
+		return mii;
+	}
+
 	switch (protocol) {
 	case MDIO_I2C_ROLLBALL:
 		ret = i2c_mii_init_rollball(i2c);