powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL

Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when
passing hugepage reservation on command line:

  Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot
  HugeTLB: allocating 1 of page size 1.00 GiB failed.  Only allocated 0 hugepages.
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty #936
  Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS
  NIP:  c1020240 LR: c10201d0 CTR: 00000000
  REGS: c13fdd30 TRAP: 0700   Not tainted  (6.10.0-rc6-00396-g6b0e82791bd0-dirty)
  MSR:  00021000 <CE,ME>  CR: 44084288  XER: 20000000

  GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000
  GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149
  GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000
  GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000
  NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284
  LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284
  Call Trace:
  [c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable)
  [c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8
  [c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc
  [c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280
  [c13fdf30] [c0078904] parse_args+0x200/0x4c4
  [c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0
  [c13fdff0] [c0000434] set_ivor+0x12c/0x168
  Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb
  ---[ end trace 0000000000000000 ]---

This is due to virt_addr_valid() using high_memory before it is set.

high_memory is set in mem_init() using max_low_pfn, but max_low_pfn
is available long before, it is set in mem_topology_setup(). So just
like commit daa9ada ("powerpc/mm: Fix boot crash with FLATMEM")
moved the setting of max_mapnr immediately after the call to
mem_topology_setup(), the same can be done for high_memory.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu

Author: chleroy

arch/powerpc/kernel/setup-common.c

@@ -959,6 +959,7 @@ void __init setup_arch(char **cmdline_p)
 	mem_topology_setup();
 	/* Set max_mapnr before paging_init() */
 	set_max_mapnr(max_pfn);
+	high_memory = (void *)__va(max_low_pfn * PAGE_SIZE);
 
 	/*
 	 * Release secondary cpus out of their spinloops at 0x60 now that

arch/powerpc/mm/mem.c

@@ -290,8 +290,6 @@ void __init mem_init(void)
 	swiotlb_init(ppc_swiotlb_enable, ppc_swiotlb_flags);
 #endif
 
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
-
 	kasan_late_init();
 
 	memblock_free_all();