Merge tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - DVB budget legacy API was finally documented. It took only 20+ years
   to get some documentation about it...

 - hantro driver has gained support for STM32MP25 VDEC/VENC

 - rkisp1 has gained support for i.MX8MP

 - atomisp got rid of two items from its todo list. Still 5 items
   pending for moving it out of staging

 - lots of driver fixes, cleanups and improvements

* tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits)
  media: rcar-isp: Disallow unbind of devices
  media: usbtv: Remove useless locks in usbtv_video_free()
  media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
  media: ttpci: fix two memleaks in budget_av_attach
  media: go7007: fix a memleak in go7007_load_encoder
  media: dvb-frontends: avoid stack overflow warnings with clang
  media: pvrusb2: fix uaf in pvr2_context_set_notify
  media: usb: s2255: Refactor s2255_get_fx2fw
  media: ti: j721e-csi2rx: Convert to platform remove callback returning void
  media: stm32-dcmipp: Convert to platform remove callback returning void
  media: nxp: imx8-isi: Convert to platform remove callback returning void
  media: nuvoton: Convert to platform remove callback returning void
  media: chips-media: wave5: Convert to platform remove callback returning void
  media: chips-media: wave5: Remove unnecessary semicolons
  media: i2c: imx290: Fix IMX920 typo
  media: platform: replace of_graph_get_next_endpoint()
  media: i2c: replace of_graph_get_next_endpoint()
  media: ivsc: csi: Make use of sub-device state
  media: ivsc: csi: Swap SINK and SOURCE pads
  media: ipu-bridge: Serialise calls to IPU bridge init
  ...

Author: torvalds

Documentation/admin-guide/media/visl.rst

@@ -49,6 +49,10 @@ Module parameters
   visl_dprintk_frame_start, visl_dprintk_nframes, but controls the dumping of
   buffer data through debugfs instead.
 
+- tpg_verbose: Write extra information on each output frame to ease debugging
+  the API. When set to true, the output frames are not stable for a given input
+  as some information like pointers or queue status will be added to them.
+
 What is the default use case for this driver?
 ---------------------------------------------
 
@@ -57,8 +61,12 @@ This assumes that a working client is run against visl and that the ftrace and
 OUTPUT buffer data is subsequently used to debug a work-in-progress
 implementation.
 
-Information on reference frames, their timestamps, the status of the OUTPUT and
-CAPTURE queues and more can be read directly from the CAPTURE buffers.
+Even though no video decoding is actually done, the output frames can be used
+against a reference for a given input, except if tpg_verbose is set to true.
+
+Depending on the tpg_verbose parameter value, information on reference frames,
+their timestamps, the status of the OUTPUT and CAPTURE queues and more can be
+read directly from the CAPTURE buffers.
 
 Supported codecs
 ----------------

Documentation/admin-guide/media/vivid.rst

@@ -60,7 +60,7 @@ all configurable using the following module options:
 - node_types:
 
 	which devices should each driver instance create. An array of
-	hexadecimal values, one for each instance. The default is 0x1d3d.
+	hexadecimal values, one for each instance. The default is 0xe1d3d.
 	Each value is a bitmask with the following meaning:
 
 		- bit 0: Video Capture node

Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml

@@ -36,7 +36,7 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/$defs/port-base
+        $ref: /schemas/graph.yaml#/properties/port
         description: Analog input port
 
         properties:

Documentation/devicetree/bindings/media/rockchip-isp1.yaml

@@ -16,6 +16,7 @@ description: |
 properties:
   compatible:
     enum:
+      - fsl,imx8mp-isp
       - rockchip,px30-cif-isp
       - rockchip,rk3399-cif-isp
 
@@ -36,9 +37,9 @@ properties:
     minItems: 3
     items:
       # isp0 and isp1
-      - description: ISP clock
-      - description: ISP AXI clock
-      - description: ISP AHB clock
+      - description: ISP clock (for imx8mp, clk)
+      - description: ISP AXI clock (for imx8mp, m_hclk)
+      - description: ISP AHB clock (for imx8mp, hclk)
       # only for isp1
       - description: ISP Pixel clock
 
@@ -52,6 +53,13 @@ properties:
       # only for isp1
       - const: pclk
 
+  fsl,blk-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to the media block control for the ISP, followed by a cell
+      containing the index of the gasket.
+
   iommus:
     maxItems: 1
 
@@ -113,9 +121,6 @@ required:
   - interrupts
   - clocks
   - clock-names
-  - iommus
-  - phys
-  - phy-names
   - power-domains
   - ports
 
@@ -143,6 +148,26 @@ allOf:
       required:
         - interrupt-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-isp
+    then:
+      properties:
+        iommus: false
+        phys: false
+        phy-names: false
+      required:
+        - fsl,blk-ctrl
+    else:
+      properties:
+        fsl,blk-ctrl: false
+      required:
+        - iommus
+        - phys
+        - phy-names
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32mp25-video-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32MP25 VDEC video decoder & VENC video encoder
+
+maintainers:
+  - Hugues Fruchet <[email protected]>
+
+description:
+  The STMicroelectronics STM32MP25 SOCs embeds a VDEC video hardware
+  decoder peripheral based on Verisilicon VC8000NanoD IP (former Hantro G1)
+  and a VENC video hardware encoder peripheral based on Verisilicon
+  VC8000NanoE IP (former Hantro H1).
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp25-vdec
+      - st,stm32mp25-venc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    video-codec@580d0000 {
+        compatible = "st,stm32mp25-vdec";
+        reg = <0x580d0000 0x3c8>;
+        interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ck_icn_p_vdec>;
+    };

Documentation/driver-api/media/drivers/ccs/ccs.rst

@@ -2,59 +2,16 @@
 
 .. include:: <isonum.txt>
 
+.. _media-ccs-driver:
+
 MIPI CCS camera sensor driver
 =============================
 
 The MIPI CCS camera sensor driver is a generic driver for `MIPI CCS
 <https://www.mipi.org/specifications/camera-command-set>`_ compliant
-camera sensors. It exposes three sub-devices representing the pixel array,
-the binner and the scaler.
-
-As the capabilities of individual devices vary, the driver exposes
-interfaces based on the capabilities that exist in hardware.
-
-Pixel Array sub-device
-----------------------
-
-The pixel array sub-device represents the camera sensor's pixel matrix, as well
-as analogue crop functionality present in many compliant devices. The analogue
-crop is configured using the ``V4L2_SEL_TGT_CROP`` on the source pad (0) of the
-entity. The size of the pixel matrix can be obtained by getting the
-``V4L2_SEL_TGT_NATIVE_SIZE`` target.
-
-Binner
-------
-
-The binner sub-device represents the binning functionality on the sensor. For
-that purpose, selection target ``V4L2_SEL_TGT_COMPOSE`` is supported on the
-sink pad (0).
-
-Additionally, if a device has no scaler or digital crop functionality, the
-source pad (1) exposes another digital crop selection rectangle that can only
-crop at the end of the lines and frames.
-
-Scaler
-------
-
-The scaler sub-device represents the digital crop and scaling functionality of
-the sensor. The V4L2 selection target ``V4L2_SEL_TGT_CROP`` is used to
-configure the digital crop on the sink pad (0) when digital crop is supported.
-Scaling is configured using selection target ``V4L2_SEL_TGT_COMPOSE`` on the
-sink pad (0) as well.
-
-Additionally, if the scaler sub-device exists, its source pad (1) exposes
-another digital crop selection rectangle that can only crop at the end of the
-lines and frames.
-
-Digital and analogue crop
--------------------------
-
-Digital crop functionality is referred to as cropping that effectively works by
-dropping some data on the floor. Analogue crop, on the other hand, means that
-the cropped information is never retrieved. In case of camera sensors, the
-analogue data is never read from the pixel matrix that are outside the
-configured selection rectangle that designates crop. The difference has an
-effect in device timing and likely also in power consumption.
+camera sensors.
+
+Also see :ref:`the CCS driver UAPI documentation <media-ccs-uapi>`.
 
 CCS static data
 ---------------

Documentation/driver-api/media/v4l2-subdev.rst

@@ -229,7 +229,7 @@ Asynchronous sub-device notifier for sub-devices
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 A driver that registers an asynchronous sub-device may also register an
-asynchronous notifier. This is called an asynchronous sub-device notifier andthe
+asynchronous notifier. This is called an asynchronous sub-device notifier and the
 process is similar to that of a bridge driver apart from that the notifier is
 initialised using :c:func:`v4l2_async_subdev_nf_init` instead. A sub-device
 notifier may complete only after the V4L2 device becomes available, i.e. there's

Documentation/userspace-api/media/drivers/ccs.rst

@@ -2,6 +2,8 @@
 
 .. include:: <isonum.txt>
 
+.. _media-ccs-uapi:
+
 MIPI CCS camera sensor driver
 =============================
 
@@ -13,6 +15,8 @@ the binner and the scaler.
 As the capabilities of individual devices vary, the driver exposes
 interfaces based on the capabilities that exist in hardware.
 
+Also see :ref:`the CCS driver kernel documentation <media-ccs-driver>`.
+
 Pixel Array sub-device
 ----------------------
 
@@ -30,7 +34,7 @@ that purpose, selection target ``V4L2_SEL_TGT_COMPOSE`` is supported on the
 sink pad (0).
 
 Additionally, if a device has no scaler or digital crop functionality, the
-source pad (1) expses another digital crop selection rectangle that can only
+source pad (1) exposes another digital crop selection rectangle that can only
 crop at the end of the lines and frames.
 
 Scaler

Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst

@@ -23,3 +23,4 @@ DVB-S2, DVB-T2, ISDB, etc.
     :maxdepth: 1
 
     frontend_legacy_dvbv3_api
+    legacy_dvb_decoder_api