clk: renesas: rzv2h: Use both CLK_ON and CLK_MON bits for clock state validation

Update the clock enable/disable logic to follow the latest hardware
manual's guidelines, ensuring that both CLK_ON and CLK_MON bits are used
to confirm the clock state.

According to the manual, enabling a clock requires setting the
CPG_CLK_ON bit and verifying the clock has started using the CPG_CLK_MON
bit.  Similarly, disabling a clock requires clearing the CPG_CLK_ON bit
and confirming the clock has stopped via the CPG_CLK_MON bit.

Modify `rzv2h_mod_clock_is_enabled()` to check CLK_MON first and then
validate CLK_ON for a more accurate clock status evaluation.

Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>

Author: prabhakarlad

drivers/clk/renesas/rzv2h-cpg.c

@@ -573,11 +573,14 @@ static int rzv2h_mod_clock_is_enabled(struct clk_hw *hw)
 	if (clock->mon_index >= 0) {
 		offset = GET_CLK_MON_OFFSET(clock->mon_index);
 		bitmask = BIT(clock->mon_bit);
-	} else {
-		offset = GET_CLK_ON_OFFSET(clock->on_index);
-		bitmask = BIT(clock->on_bit);
+
+		if (!(readl(priv->base + offset) & bitmask))
+			return 0;
 	}
 
+	offset = GET_CLK_ON_OFFSET(clock->on_index);
+	bitmask = BIT(clock->on_bit);
+
 	return readl(priv->base + offset) & bitmask;
 }