tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers

According to the LPUART reference manual, TXRTSE and TXRTSPOL of MODIR
register only can be changed when the transmitter is disabled.
So disable the transmitter before changing RS485 related registers and
re-enable it after the change is done.

Fixes: 67b0183 ("tty: serial: lpuart: Add RS485 support for 32-bit uart flavour")
Cc: stable <[email protected]>
Signed-off-by: Sherry Sun <[email protected]>
Reviewed-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: SherrySun5

drivers/tty/serial/fsl_lpuart.c

@@ -1484,6 +1484,19 @@ static int lpuart32_config_rs485(struct uart_port *port, struct ktermios *termio
 
 	unsigned long modem = lpuart32_read(&sport->port, UARTMODIR)
 				& ~(UARTMODIR_TXRTSPOL | UARTMODIR_TXRTSE);
+	u32 ctrl;
+
+	/* TXRTSE and TXRTSPOL only can be changed when transmitter is disabled. */
+	ctrl = lpuart32_read(&sport->port, UARTCTRL);
+	if (ctrl & UARTCTRL_TE) {
+		/* wait for the transmit engine to complete */
+		lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
+		lpuart32_write(&sport->port, ctrl & ~UARTCTRL_TE, UARTCTRL);
+
+		while (lpuart32_read(&sport->port, UARTCTRL) & UARTCTRL_TE)
+			cpu_relax();
+	}
+
 	lpuart32_write(&sport->port, modem, UARTMODIR);
 
 	if (rs485->flags & SER_RS485_ENABLED) {
@@ -1503,6 +1516,10 @@ static int lpuart32_config_rs485(struct uart_port *port, struct ktermios *termio
 	}
 
 	lpuart32_write(&sport->port, modem, UARTMODIR);
+
+	if (ctrl & UARTCTRL_TE)
+		lpuart32_write(&sport->port, ctrl, UARTCTRL);
+
 	return 0;
 }