Merge tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for LTC2991

   - Driver for POWER-Z

  Added chip / system support to existing drivers:

   - The ina238 driver now also supports INA237

   - The asus-ec-sensors driver now supports ROG Crosshair X670E Gene

   - The aquacomputer_d5next now supports Aquacomputer High Flow USB and
     MPS Flow

   - The pmbus/mpq7932 driver now also supports MPQ2286

   - The nct6683 now also supports ASRock X670E Taichi

  Various other minor improvements and fixes:

   - One patch series to call out is the conversion of hwmon platform
     drivers to use the platform remove callback returning void"

* tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (69 commits)
  hwmon: (aquacomputer_d5next) Check if temp sensors of legacy devices are connected
  hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and MPS Flow
  dt-bindings: hwmon: npcm: Add npcm845 compatible string
  hwmon: Add driver for ltc2991
  dt-bindings: hwmon: ltc2991: add bindings
  hwmon: (pmbus/max31785) Add delay between bus accesses
  hwmon: (ina238) add ina237 support
  dt-bindings: hwmon: ti,ina2xx: add ti,ina237
  hwmon: (asus-ec-sensors) add ROG Crosshair X670E Gene.
  hwmon: (max31827) handle vref regulator
  hwmon: (ina3221) Add support for channel summation disable
  dt-bindings: hwmon: ina3221: Add ti,summation-disable
  dt-bindings: hwmon: ina3221: Convert to json-schema
  hwmon: (pmbus/mpq7932) Add a support for mpq2286 Power Management IC
  hwmon: (pmbus/core) Add helper macro to define single pmbus regulator
  regulator: dt-bindings: Add mps,mpq2286 power-management IC
  hwmon: (pmbus/mpq7932) Get page count based on chip info
  dt-bindings: hwmon: Add possible new properties to max31827 bindings
  hwmon: (max31827) Modify conversion wait time
  hwmon: (max31827) Make code cleaner
  ...

Author: torvalds

Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml

@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2991.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2991 Octal I2C Voltage, Current and Temperature Monitor
+
+maintainers:
+  - Antoniu Miclaus <[email protected]>
+
+description: |
+  The LTC2991 is used to monitor system temperatures, voltages and currents.
+  Through the I2C serial interface, the eight monitors can individually measure
+  supply voltages and can be paired for differential measurements of current
+  sense resistors or temperature sensing transistors.
+
+  Datasheet:
+    https://www.analog.com/en/products/ltc2991.html
+
+properties:
+  compatible:
+    const: adi,ltc2991
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  vcc-supply: true
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+    description:
+      Represents the differential/temperature channels.
+
+    properties:
+      reg:
+        description:
+          The channel number. LTC2991 can monitor 4 currents/temperatures.
+        items:
+          minimum: 0
+          maximum: 3
+
+      shunt-resistor-micro-ohms:
+        description:
+          The value of curent sense resistor in micro ohms. Pin configuration is
+          set for differential input pair.
+
+      adi,temperature-enable:
+        description:
+          Enables temperature readings. Pin configuration is set for remote
+          diode temperature measurement.
+        type: boolean
+
+    required:
+      - reg
+
+    allOf:
+      - if:
+          required:
+            - shunt-resistor-micro-ohms
+        then:
+          properties:
+            adi,temperature-enable: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@48 {
+            compatible = "adi,ltc2991";
+            reg = <0x48>;
+            vcc-supply = <&vcc>;
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@48 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ltc2991";
+            reg = <0x48>;
+            vcc-supply = <&vcc>;
+
+            channel@0 {
+                    reg = <0x0>;
+                    shunt-resistor-micro-ohms = <100000>;
+            };
+
+            channel@1 {
+                    reg = <0x1>;
+                    shunt-resistor-micro-ohms = <100000>;
+            };
+
+            channel@2 {
+                    reg = <0x2>;
+                    adi,temperature-enable;
+            };
+
+            channel@3 {
+                    reg = <0x3>;
+                    adi,temperature-enable;
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/hwmon/adi,max31827.yaml

@@ -32,6 +32,68 @@ properties:
       Must have values in the interval (1.6V; 3.6V) in order for the device to
       function correctly.
 
+  adi,comp-int:
+    description:
+      If present interrupt mode is used. If not present comparator mode is used
+      (default).
+    type: boolean
+
+  adi,alarm-pol:
+    description:
+      Sets the alarms active state.
+            - 0 = active low
+            - 1 = active high
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  adi,fault-q:
+    description:
+      Select how many consecutive temperature faults must occur before
+      overtemperature or undertemperature faults are indicated in the
+      corresponding status bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
+  adi,timeout-enable:
+    description:
+      Enables timeout. Bus timeout resets the I2C-compatible interface when SCL
+      is low for more than 30ms (nominal).
+    type: boolean
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,max31829
+
+    then:
+      properties:
+        adi,alarm-pol:
+          default: 1
+
+    else:
+      properties:
+        adi,alarm-pol:
+          default: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,max31827
+
+    then:
+      properties:
+        adi,fault-q:
+          default: 1
+
+    else:
+      properties:
+        adi,fault-q:
+          default: 4
+
+
 required:
   - compatible
   - reg
@@ -49,6 +111,10 @@ examples:
             compatible = "adi,max31827";
             reg = <0x42>;
             vref-supply = <&reg_vdd>;
+            adi,comp-int;
+            adi,alarm-pol = <0>;
+            adi,fault-q = <1>;
+            adi,timeout-enable;
         };
     };
 ...

Documentation/devicetree/bindings/hwmon/ina3221.txt

@@ -1,12 +1,16 @@
-Nuvoton NPCM7xx PWM and Fan Tacho controller device
+Nuvoton NPCM PWM and Fan Tacho controller device
 
 The Nuvoton BMC NPCM7XX supports 8 Pulse-width modulation (PWM)
 controller outputs and 16 Fan tachometer controller inputs.
 
+The Nuvoton BMC NPCM8XX supports 12 Pulse-width modulation (PWM)
+controller outputs and 16 Fan tachometer controller inputs.
+
 Required properties for pwm-fan node
 - #address-cells : should be 1.
 - #size-cells	: should be 0.
 - compatible	: "nuvoton,npcm750-pwm-fan" for Poleg NPCM7XX.
+				: "nuvoton,npcm845-pwm-fan" for Arbel NPCM8XX.
 - reg			: specifies physical base address and size of the registers.
 - reg-names	: must contain:
 					* "pwm" for the PWM registers.

Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/infineon,tda38640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon TDA38640 Synchronous Buck Regulator with SVID and I2C
+
+maintainers:
+  - Naresh Solanki <[email protected]>
+
+description: |
+  The Infineon TDA38640 is a 40A Single-voltage Synchronous Buck
+  Regulator with SVID and I2C designed for Industrial use.
+
+  Datasheet: https://www.infineon.com/dgdl/Infineon-TDA38640-0000-DataSheet-v02_04-EN.pdf?fileId=8ac78c8c80027ecd018042f2337f00c9
+
+properties:
+  compatible:
+    enum:
+      - infineon,tda38640
+
+  reg:
+    maxItems: 1
+
+  infineon,en-pin-fixed-level:
+    description:
+      Indicates that the chip EN pin is at fixed level or left
+      unconnected(has internal pull-down).
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tda38640@40 {
+            compatible = "infineon,tda38640";
+            reg = <0x40>;
+        };
+    };

Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml

@@ -26,6 +26,7 @@ properties:
       - ti,ina226
       - ti,ina230
       - ti,ina231
+      - ti,ina237
       - ti,ina238
 
   reg: