Skip to content

Documentation 2.0.0.0

Jump to bottom
Jan Böhringer edited this page Sep 22, 2025 · 9 revisions

Documentation for ping-pong process version 2.0.0.0-RC1

Changes to previous versions can be found in the release notes.

Configuration

Input Parameters

target-endpoints

  • FHIR search expression to retrieve a list of endpoints to ping. Below is an example of getting all Endpoint resources that belong to an organization with identifier 'test.identifier.org':
    Endpoint?status=active&organization:identifier=http://dsf.dev/sid/organization-identifier|test.identifier.org
  • Leave empty to ping all active endpoints

download-resource-size-bytes

  • Specifies the size of the resource to be generated to make download tests with
  • DSF 1.x has a ~400MB limitation on resource size. DSF 2.0.0-M4 is confirmed working with up to 10GB of data provided the right settings are used for all communication partners, meaning all proxies allow file uploads of 10GB, and timeouts (DSF FHIR Server, BPE and pong) are configured in such a way that no read timeouts can occur
  • Setting this value to -1 disables resource generation and download, making the process function like v1.x versions of the process plugin
  • Leave empty to default to 10MB

pong-timeout-duration

  • Specifies the amount of time the process waits to receive a pong message
  • Uses the ISO 8601 duration format, e.g. PT1H5M30S for a duration of 1 hour, 5 minutes and 30 seconds
  • Leave empty to default to 30 seconds

Output Parameters

Output parameters show errors encountered before sending ping messages to endpoints as well as a status for each endpoint that ping messages got sent to. This status includes information on whether the endpoint was reachable, a pong message was received or is missing:

  • not-reachable: the endpoint was not reachable
  • pong-missing: the endpoint was reachable, but did not respond with a pong message in the desired time frame
  • pong-received: the endpoint was reachable and returned a pong message in time

The status may also include error codes and messages that occured either on the sending side or the receiving side (denoted with local and remote). Some errors also include a URL where troubleshooting tips can be found. Error messages may not be visible in the HTML view of the DSF FHIR server. Switching to JSON or XML view shows the messages. This also applies to error messages from errors encountered before sending any ping messages.

Environment Variables

DEV_DSF_BPE_PING_MAX_DOWNLOAD_SIZE_BYTES

  • Property: dev.dsf.bpe.ping.maxDownloadSizeBytes
  • Required: No
  • Processes: dsfdev_ping, dsfdev_pong
  • Description: Sets the download limit on resource downloads, essentially limiting the amount of data downloaded from other ping instances. Setting this to a negative value will disable resource downloads, effectively resulting in running the slim (v1.x) ping process.
  • Default: 400000000

DEV_DSF_BPE_PING_MAX_UPLOAD_SIZE_BYTES

  • Property: dev.dsf.bpe.ping.maxUploadSizeBytes
  • Required: No
  • Processes: dsfdev_ping, dsfdev_pong
  • Description: Sets the upload limit on resource uploads, essentially limiting the amount of data other ping instances are able to download from this instance.
  • Default: 400000000

DEV_DSF_BPE_PING_NETWORK_SPEED_UNIT

  • Property: dev.dsf.bpe.ping.networkSpeedUnit
  • Required: No
  • Processes: dsfdev_ping, dsfdev_pong
  • Description: Unit to display upload and download speeds in. Eligible values are: "bps", "kbps", "Mbps", "Gbps", "Bps", "kBps", "MBps", "GBps". If unset, the process will try to fit the network speed to appropriate units.

DEV_DSF_DSF_BPE_PING_MAIL_ONPINGPROCESSFAILED

  • Property: dev.dsf.dsf.bpe.ping.mail.onPingProcessFailed
  • Required: No
  • Processes: dsfdev_ping
  • Description: To enable a mail being sent if the ping process fails, set to 'true'. This requires the SMPT mail service client to be configured in the DSF
  • Default: false

DEV_DSF_DSF_BPE_PING_MAIL_ONPONGPROCESSFAILED

  • Property: dev.dsf.dsf.bpe.ping.mail.onPongProcessFailed
  • Required: No
  • Processes: dsfdev_pong
  • Description: To enable a mail being sent if the pong process fails, set to 'true'. This requires the SMPT mail service client to be configured in the DSF
  • Default: false
Clone this wiki locally