wifi: rtw88: limit indirect IO under powered off for RTL8822CS

[ Upstream commit f3ccdfda345ca9a624ea425840a926b8338c1e25 ]

The indirect IO is necessary for RTL8822CS, but not necessary for other
chips. Otherwiese, it throws errors and becomes unusable.

 rtw88_8723cs mmc1:0001:1: WOW Firmware version 11.0.0, H2C version 0
 rtw88_8723cs mmc1:0001:1: Firmware version 11.0.0, H2C version 0
 rtw88_8723cs mmc1:0001:1: sdio read32 failed (0xf0): -110
 rtw88_8723cs mmc1:0001:1: sdio write8 failed (0x1c): -110
 rtw88_8723cs mmc1:0001:1: sdio read32 failed (0xf0): -110

By vendor driver, only RTL8822CS and RTL8822ES need indirect IO, but
RTL8822ES isn't supported yet. Therefore, limit it to RTL8822CS only.

Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/07a32e2d6c764eb1bd9415b5a921a652@realtek.com/T/#m997b4522f7209ba629561c776bfd1d13ab24c1d4
Fixes: 58de1f9 ("wifi: rtw88: sdio: use indirect IO for device registers before power-on")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://patch.msgid.link/1764034729-1251-1-git-send-email-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 34e9dd0a1281287f2a8035a0198b48f351adbd08)
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>

Author: Ping-Ke Shih

drivers/net/wireless/realtek/rtw88/sdio.c

@@ -143,8 +143,10 @@ static u32 rtw_sdio_to_io_address(struct rtw_dev *rtwdev, u32 addr,
 
 static bool rtw_sdio_use_direct_io(struct rtw_dev *rtwdev, u32 addr)
 {
+	bool might_indirect_under_power_off = rtwdev->chip->id == RTW_CHIP_TYPE_8822C;
+
 	if (!test_bit(RTW_FLAG_POWERON, rtwdev->flags) &&
-	    !rtw_sdio_is_bus_addr(addr))
+	    !rtw_sdio_is_bus_addr(addr) && might_indirect_under_power_off)
 		return false;
 
 	return !rtw_sdio_is_sdio30_supported(rtwdev) ||