HarryPlotter is on eduroam!

Author: SimonVanherweghe

src/content/docs/index.md

@@ -14,7 +14,7 @@ Join us for an ongoing exploration of plotting, embroidery and other techniques.
 
 Atelier 2 (Tech Tile Temple)
 
-[Create your own poster](/techtiletime/posters/ttt-2025-1.svg)
+[Plot/cut/embroider your own poster](/techtiletime/posters/ttt-2025-1.svg)
 
 ## Tech Tile Temple
 

src/content/docs/plotter/01-webinterface.md

@@ -7,12 +7,11 @@ The most easy way to get a vector file plotted is to use the web interface 'saxi
 
 ## Steps
 
-1. Connect to the plotter's Wi-Fi network: Harry Plotter or Helmut Plotti
-2. The password is 'plottermcplotface'
-3. Open a browser and go to <http://plotter.local:9080>
-4. Drag your SVG file on te canvas
-5. Adjust settings if needed
-6. Align the paper, fix it in place with some magnets (check if they aren't in the path of the plotter)
-7. Click the 'pen up' button, the penclip should be raised up then.
-8. Mount the pen, make sure its point is hovering a couple of millimeters above the paper
-9. Plot!
+1. Connect to the `eduroam-2.4` wifi network
+2. Open a browser and go to <http://harryplotter.technet.howest.be:9080/>
+3. Drag your SVG file on te canvas
+4. Adjust settings if needed
+5. Align the paper, fix it in place with some magnets (check if they aren't in the path of the plotter)
+6. Click the 'pen up' button, the penclip should be raised up then.
+7. Mount the pen, make sure its point is hovering a couple of millimeters above the paper
+8. Plot!