Rooting Dreame L10s Pro #352
Description
Unfortunatelly i have the latest firmware (4.3.3_1408) installed. Isn't there anything i can do to do rooting?
I have UART pressing "s" i get the boot log, but no prompt :-(
ss[321]HELLO! BOOT0 is starting!
[324]sbrom commit : 846e3c522904fcb00516d9a9db9315bae0585638
[333]key press : s
[1078]run out of boot0
M/TC: OP-TEE version: 0c5d51e3-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 2022年 04月 08日 星期五 01:50:45 UTC arm
M/TC: arisc version: [sun8iw5_v0.03.00-527-g1e7fea4]
U-Boot 2014.07-g7613f68 (Jun 13 2022 - 11:55:45) Allwinner Technology dreame
uboot commit : 7613f68e871427bad6f68b7a18e995affef751c7
secure enable bit: 1
secure mode: with secureos
optee version: major:3 minor:7
[1.175]rsb init by cpus
[1.175]pmbus: ready
[1.176]PMU: AXP858
[1.178]PMU: AXP858 found
[1.180]rsb read failed, flag 0x1: 1STE !!
[1.184]axp2585 read error
probe axp858 failed
[1.188]bat_vol=0, ratio=-1
[1.191]set power on vol to default
[1.194]dc1sw_vol = 3300, onoff=1
[1.197]dcdc6_vol = 3300, onoff=1
[1.200]aldo1_vol = 3300, onoff=0
[1.202]aldo5_vol = 2500, onoff=0
[1.205]dcdc3_vol = 900, onoff=0
[1.208]cldo2_vol = 3300, onoff=0
[1.211]find power_sply to end
[1.214]PMU: cpux 1008 Mhz,AXI=504 Mhz
[1.217]PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz MBus=400Mhz
DRAM: 512 MiB
[1.225]fdt addr: 0x5acd49e0
[1.226]gd->fdt_size: 0x15a40
Relocation Offset is: 15ddc000
gic: sec monitor mode
[1.294]power on cpu1
[1.294]set cpu on by secure os
[1.294][cpu1]task entry
[1.295][cpu1]PowerBus = 0( 2:vBus 3:acBus other: not exist)
[1.295][cpu1]no battery exist
[1.295][cpu1]display init start
[cpu1]drv_disp_init
[cpu1]init_clocks: finish init_clocks.
[1.304]power on cpu2
[1.304]set cpu on by secure os
[1.305][cpu2]task entry
[1.305][cpu2]ready to work
[1.305]flash init start
[cpu1]drv_disp_init finish
[cpu2]bmp lzma decode err
workmode = 0,storage type = 0
[1.312][cpu2]cpu 2 enter wfi mode
[1.311][cpu1]fetch script boot_disp.output_disp fail
[1.315]NAND: [1.323][cpu1]fetch script boot_disp.output_type fail
NAND_UbootInit
[1.329][cpu1]fetch script boot_disp.output_mode fail
[1.330]NAND_UbootInit start
[1.335][cpu1]fetch script data boot_disp.auto_hpd fail
[1.337]NB1: enter NAND_LogicInit
[1.342][cpu1]disp0 device type(1) enable
[1.341][cpu2]set cpu off by secure os
[1.350]nand_set_gpio_power 488 use default 3.3V
[cpu1]drv_lcd_open_callback lcd open flow is NULL! LCD enable fail!
[1.362][cpu1]display init end
[1.364]uboot: nand version: 3 6037 20201211 17550849
[1.370]not burn nand partition table!
[1.373]NB1: nftl num: 1
[1.375]init nftl: 0
[2.055][ND] not find panic data, no need to recovery!
[2.055]NB1: NAND_LogicInit ok, result = 0x0
[2.055]NAND_UbootInit end: 0x0
[2.055]sunxi flash init ok
[2.057]GPT partition init ok
no item name widevine in the map
sunxi storage read fail
secure storage read widevine fail
[2.058]secure storage read fail
[2.060]Widevine key install fail !!!
no item name ec_key in the map
sunxi storage read fail
secure storage read ec_key fail
no item name rsa_key in the map
sunxi storage read fail
secure storage read rsa_key fail
no item name ec_cert1 in the map
sunxi storage read fail
secure storage read ec_cert1 fail
no item name ec_cert2 in the map
sunxi storage read fail
secure storage read ec_cert2 fail
no item name ec_cert3 in the map
sunxi storage read fail
secure storage read ec_cert3 fail
no item name rsa_cert1 in the map
sunxi storage read fail
secure storage read rsa_cert1 fail
no item name rsa_cert2 in the map
sunxi storage read fail
secure storage read rsa_cert2 fail
no item name rsa_cert3 in the map
sunxi storage read fail
secure storage read rsa_cert3 fail
[2.128]keymasters key install finish
env and backup env are not synchronized,now to synchronize
load key rpmb_key with default cb
no item name rpmb_key in the map
sunxi storage read fail
secure storage read rpmb_key fail
secure storage read rpmb_key fail with:-1
load key dm_crypt_key with default cb
no item name dm_crypt_key in the map
sunxi storage read fail
secure storage read dm_crypt_key fail
secure storage read dm_crypt_key fail with:-1
[2.192]flash init end
[2.194]try to burn key
no item name key_burned_flag in the map
sunxi storage read fail
sunxi secure storage has no flag
[2.204]usb burn from boot
delay time 0
weak:otg_phy_config
[2.211]usb prepare ok
[3.013]overtime
[3.013]do_burn_from_boot usb : no usb exist
no item name device_unlock in the map
sunxi storage read fail
no item name fastboot_status_flag in the map
sunxi storage read fail
sunxi secure storage has no flag
root_partition is rootfs2
--------fastboot partitions--------
-total partitions:10-
-name- -start- -size-
UDISK : 8700000 5afb000
env : 80000 80000
boot1 : 100000 500000
rootfs1 : 600000 3700000
boot2 : 3d00000 500000
rootfs2 : 4200000 3700000
private : 7900000 80000
misc : 7980000 300000
pstore : 7c80000 80000
bak : 7d00000 a00000
-----------------------------------
set root to /dev/nand0p6
[3.063][mmc]: MMC Device 2 not found
[3.067]base bootcmd=run setargs_nand boot_normal
[3.071]bootcmd set setargs_nand
[3.074]key -1
[3.075]cant find rcvy value
[3.078]cant find fstbt value
[3.080]misc partition found
[3.083]to be run cmd=run setargs_nand boot_normal
[3.090]drm_base=0x60000000
[3.090]drm_size=0x0
[3.092](sunxi):update dtb dram start
[3.096]update dtb dram end
no item name rootwait init in the map
sunxi storage read fail
no item name rdinit in the map
sunxi storage read fail
no item name blkoops.blkdev in the map
sunxi storage read fail
[3.113]inter uboot shell
[3.116]Version: U-Boot 2014.07-g7613f68 (Jun 13 2022 - 11:55:45) Allwinner Technology dreame
saveenv storage_type = 0
[3.173]read partition: boot or recovery
[3.410]sunxi flash read :offset 3d00000, 2932736 bytes OK
Android's image name: organ-perf1
Kernel load addr 0x40008000 size 2858 KiB
RAM disk load addr 0x41000000 size 1 KiB
begin to verify rootfs
squashfs len:34103296, part len:57671680
find rootfs key stored in root certif
partition rootfs2 verify pass
total_len=2930688
in boot normal mode,pass normal para to cmdline
android.hardware = sun8iw15p1
[3.556]ready to boot
[3.556]check cpu power status
[3.556][cpu1]cpu 1 enter wfi mode
[3.556]cpu2 has poweroff
[3.578][cpu1]set cpu off by secure os
[3.578]cpu1 has poweroff
[3.580]prepare for kernel
NAND_UbootExit
[3.580]NB1: NAND_LogicExit
[3.586]
Starting kernel ...
[3.586]weak clean_timestamp_counter