Revert "test escaped pipes in generated md"

This reverts commit 3f046c4.

Author: divadiow

docs/commands-extended.md

@@ -191,7 +191,7 @@ Do not add anything here, as it will overwritten with next rebuild.
 | logfeature | [Index][1or0] | Set log feature filter, as an index and a 1 or 0.<br/><br/>See also [logfeature on forum](https://www.elektroda.com/rtvforum/find.php?q=logfeature). | File: logging/logging.c<br/>Function: log_command |
 | loglevel | [Value] | Correct values are 0 to 7. Default is 3. Higher value includes more logs. Log levels are: ERROR = 1, WARN = 2, INFO = 3, DEBUG = 4, EXTRADEBUG = 5. WARNING: you also must separately select logging level filter on web panel in order for more logs to show up there.<br/><br/>See also [loglevel on forum](https://www.elektroda.com/rtvforum/find.php?q=loglevel). | File: logging/logging.c<br/>Function: log_command |
 | logport | [Index] | Allows you to change log output port. On Beken, the UART1 is used for flashing and for TuyaMCU/BL0942, while UART2 is for log. Sometimes it might be easier for you to have log on UART1, so now you can just use this command like backlog uartInit 115200; logport 1 to enable logging on UART1..<br/><br/>See also [logport on forum](https://www.elektroda.com/rtvforum/find.php?q=logport). | File: logging/logging.c<br/>Function: log_port |
-| logtype | [TypeStr] | Logtype direct\|thread\|none - type of serial logging - thread (in a thread; default), direct (logged directly to serial), none (no UART logging).<br/><br/>See also [logtype on forum](https://www.elektroda.com/rtvforum/find.php?q=logtype). | File: logging/logging.c<br/>Function: log_command |
+| logtype | [TypeStr] | Logtype direct|thread|none - type of serial logging - thread (in a thread; default), direct (logged directly to serial), none (no UART logging).<br/><br/>See also [logtype on forum](https://www.elektroda.com/rtvforum/find.php?q=logtype). | File: logging/logging.c<br/>Function: log_command |
 | LTR_ALS | [gain] [integration] [repeat] | ALS configuration. Gain mappings: 0-x1 1-x2 2-x4 3-x8 6-x48 7-x96. Integration mappings (ms): 0-100 1-50 2-200 3-400 4-150 5-250 6-300 7-350. Repeat mappings (ms): 0-50 1-100 2-200 3-500 4-1000 5-2000.<br/><br/>Example: LTR_ALS 3 0 3 <br /> gain 8x, integration 100ms, repeat 500ms<br/><br/>See also [LTR_ALS on forum](https://www.elektroda.com/rtvforum/find.php?q=LTR_ALS). | File: driver/drv_ltr_als.c<br/>Function: LTR_ALS |
 | LTR_Cycle | [IntervalSeconds] | This is the interval between measurements in seconds, by default 1. Max is 255.<br/><br/>Example: LTR_Cycle 60 <br /> measurement is taken every 60 seconds<br/><br/>See also [LTR_Cycle on forum](https://www.elektroda.com/rtvforum/find.php?q=LTR_Cycle). | File: driver/drv_ltr_als.c<br/>Function: LTR_Cycle |
 | LTR_INT | [enable] [als_low] [als_high] [persistance] | Interrupt configuration. Enable = 0-1, persistance (oversampling) = 0-15. als_low/als_high - raw thresholds.<br/><br/>Example: LTR_INT 1 200 2000 4 <br /> enable interrupt, when measurement is lower than 200 or higher than 2000 4 times<br/><br/>See also [LTR_INT on forum](https://www.elektroda.com/rtvforum/find.php?q=LTR_INT). | File: driver/drv_ltr_als.c<br/>Function: LTR_INT |

docs/commands.md

@@ -194,7 +194,7 @@ Do not add anything here, as it will overwritten with next rebuild.
 | logfeature | [Index][1or0] | Set log feature filter, as an index and a 1 or 0.<br/><br/>See also [logfeature on forum](https://www.elektroda.com/rtvforum/find.php?q=logfeature). |
 | loglevel | [Value] | Correct values are 0 to 7. Default is 3. Higher value includes more logs. Log levels are: ERROR = 1, WARN = 2, INFO = 3, DEBUG = 4, EXTRADEBUG = 5. WARNING: you also must separately select logging level filter on web panel in order for more logs to show up there.<br/><br/>See also [loglevel on forum](https://www.elektroda.com/rtvforum/find.php?q=loglevel). |
 | logport | [Index] | Allows you to change log output port. On Beken, the UART1 is used for flashing and for TuyaMCU/BL0942, while UART2 is for log. Sometimes it might be easier for you to have log on UART1, so now you can just use this command like backlog uartInit 115200; logport 1 to enable logging on UART1..<br/><br/>See also [logport on forum](https://www.elektroda.com/rtvforum/find.php?q=logport). |
-| logtype | [TypeStr] | Logtype direct\|thread\|none - type of serial logging - thread (in a thread; default), direct (logged directly to serial), none (no UART logging).<br/><br/>See also [logtype on forum](https://www.elektroda.com/rtvforum/find.php?q=logtype). |
+| logtype | [TypeStr] | Logtype direct|thread|none - type of serial logging - thread (in a thread; default), direct (logged directly to serial), none (no UART logging).<br/><br/>See also [logtype on forum](https://www.elektroda.com/rtvforum/find.php?q=logtype). |
 | LTR_ALS | [gain] [integration] [repeat] | ALS configuration. Gain mappings: 0-x1 1-x2 2-x4 3-x8 6-x48 7-x96. Integration mappings (ms): 0-100 1-50 2-200 3-400 4-150 5-250 6-300 7-350. Repeat mappings (ms): 0-50 1-100 2-200 3-500 4-1000 5-2000.<br/><br/>Example: LTR_ALS 3 0 3 <br /> gain 8x, integration 100ms, repeat 500ms<br/><br/>See also [LTR_ALS on forum](https://www.elektroda.com/rtvforum/find.php?q=LTR_ALS). |
 | LTR_Cycle | [IntervalSeconds] | This is the interval between measurements in seconds, by default 1. Max is 255.<br/><br/>Example: LTR_Cycle 60 <br /> measurement is taken every 60 seconds<br/><br/>See also [LTR_Cycle on forum](https://www.elektroda.com/rtvforum/find.php?q=LTR_Cycle). |
 | LTR_INT | [enable] [als_low] [als_high] [persistance] | Interrupt configuration. Enable = 0-1, persistance (oversampling) = 0-15. als_low/als_high - raw thresholds.<br/><br/>Example: LTR_INT 1 200 2000 4 <br /> enable interrupt, when measurement is lower than 200 or higher than 2000 4 times<br/><br/>See also [LTR_INT on forum](https://www.elektroda.com/rtvforum/find.php?q=LTR_INT). |