Solokeys

[gibait]

Hello, first of all thank you for this project!
I can't seem to make my solo key work with Windows 10. I have kernel 5.10.60.1-microsoft-standard-WSL2 installed, usbipd usbipd-win 2.1.0 version and i followed every step in the wiki. usbipd shows:

C:\WINDOWS\system32>usbipd wsl list
BUSID  DEVICE                                                        STATE
1-1    Logitech USB Input Device, Dispositivo di input USB           Not attached
1-2    Dispositivo di input USB                                      Attached - Ubuntu
1-3    Alcor Micro USB Smart Card Reader                             Not attached
1-7    Intel(R) Wireless Bluetooth(R)                                Not attached
1-8    Integrated Camera                                             Not attached
1-9    Synaptics WBDI - SGX                                          Not attached
1-15   Realtek USB 3.0 Card Reader                                   Not attached

And lsusb on WSL:

giba@Thinkpad-T480:~$ lsusb  
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 007: ID 0483:a2ca STMicroelectronics Solo 4.1.5
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

So, device is connected if i understood properly. dmesg output is ok also:

[ 4014.426650] usb 1-1: new full-speed USB device number 7 using vhci_hcd
[ 4014.506842] vhci_hcd: vhci_device speed not set
[ 4014.576810] usb 1-1: SetAddress Request (7) to port 0
[ 4014.612352] usb 1-1: New USB device found, idVendor=0483, idProduct=a2ca, bcdDevice= 1.00
[ 4014.612354] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4014.612355] usb 1-1: Product: Solo 4.1.5
[ 4014.612356] usb 1-1: Manufacturer: SoloKeys
[ 4014.612356] usb 1-1: SerialNumber: 207331B9414E

udev rules:

giba@Thinkpad-T480:~$ cat /etc/udev/rules.d/70-solokeys-access.rules
# Notify ModemManager this device should be ignored
ACTION!="add|change|move", GOTO="mm_usb_device_blacklist_end"
SUBSYSTEM!="usb", GOTO="mm_usb_device_blacklist_end"
ENV{DEVTYPE}!="usb_device",  GOTO="mm_usb_device_blacklist_end"

ATTRS{idVendor}=="0483", ATTRS{idProduct}=="a2ca", ENV{ID_MM_DEVICE_IGNORE}="1"

LABEL="mm_usb_device_blacklist_end"


# Solo bootloader + firmware access
SUBSYSTEM=="hidraw", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="a2ca", TAG+="uaccess"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="a2ca", TAG+="uaccess"

# ST DFU access
SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess"

# U2F Zero
SUBSYSTEM=="hidraw", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="8acf", TAG+="uaccess"

drivers:

giba@Thinkpad-T480:~$ ls -al /sys/bus/usb/drivers/usbhid
total 0
drwxr-xr-x 2 root root    0 Mar 16 08:40 .
drwxr-xr-x 8 root root    0 Mar 16 08:40 ..
lrwxrwxrwx 1 root root    0 Mar 16 09:55 1-1:1.0 -> ../../../../devices/platform/vhci_hcd.0/usb1/1-1/1-1:1.0
--w------- 1 root root 4096 Mar 16 08:40 bind
lrwxrwxrwx 1 root root    0 Mar 16 08:40 module -> ../../../../module/usbhid
-rw-r--r-- 1 root root 4096 Mar 16 08:40 new_id
-rw-r--r-- 1 root root 4096 Mar 16 08:40 remove_id
--w------- 1 root root 4096 Mar 16 08:40 uevent
--w------- 1 root root 4096 Mar 16 08:40 unbind

Kernel recompilation should not be necessary since kernel version is 5.10.60.1 right? What am i missing here?

[dorssel]

@gibait
Everything you posted looks correct. What exactly is the problem you are having?

[aseigler]

The default WSL2 kernel config does not have CONFIG_HIDRAW set, which I believe is at least part of the problem. Recompiled with that on, I get

[   12.324391] usb 1-1: new full-speed USB device number 2 using vhci_hcd
[   12.404431] vhci_hcd: vhci_device speed not set
[   12.474556] usb 1-1: SetAddress Request (2) to port 0
[   12.512399] usb 1-1: New USB device found, idVendor=0483, idProduct=a2ca, bcdDevice= 1.00
[   12.512403] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   12.512406] usb 1-1: Product: Solo 4.1.0
[   12.512409] usb 1-1: Manufacturer: SoloKeys
[   12.512411] usb 1-1: SerialNumber: 209933B9344B
[   12.518078] hid-generic 0003:0483:A2CA.0001: hiddev96,hidraw0: USB HID v1.11 Device [SoloKeys Solo 4.1.0] on usb-vhci_hcd.0-1/input0

But solo ls just reports :: Solos, so something else seems missing.

[gibait]

I tried recompiling it too with the following config:

# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y

Yet, dmesg still warns me of device has no listeners, quitting.
Did you use solokey udev rules they provide?
Also can you show me your your /sys/bus/usb/drivers/usbhid folder content?

EDIT:
Rebooting has worked for me, now i even see with solo ls, only for root user though, must be udev rules fault.

(venv) root@Thinkpad-T480:/home/giba/solo1-cli# solo ls
THIS COMMAND SHOULD NOT BE RUN AS ROOT!

Please install udev rules and run `solo` as regular user (without sudo).
For more information, see: https://docs.solokeys.io/solo/udev
:: Solos
207331B9414E: SoloKeys Solo 4.1.5

[aseigler]

I basically did the same thing and have the same results

Please install udev rules and run `solo` as regular user (without sudo).
For more information, see: https://docs.solokeys.io/solo/udev
:: Solos
209933B9344B: SoloKeys Solo 4.1.0

Agreed, gotta be some sort of udev failure at this point. I'm using this set along with this set and none of it appears to be working. Progress, though.

[aseigler]

Installing this got me the rest of the way through: https://github.com/arkane-systems/genie

[gibait]

I only used solo setup and it worked. Also restarted udev service