Rectangle.xml

<Type Name="Rectangle" FullName="System.Drawing.Rectangle">
  <TypeSignature Language="C#" Value="public struct Rectangle : IEquatable&lt;System.Drawing.Rectangle&gt;" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
  <TypeSignature Language="ILAsm" Value=".class public sequential ansi sealed beforefieldinit Rectangle extends System.ValueType implements class System.IEquatable`1&lt;valuetype System.Drawing.Rectangle&gt;" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
  <TypeSignature Language="DocId" Value="T:System.Drawing.Rectangle" />
  <TypeSignature Language="VB.NET" Value="Public Structure Rectangle&#xA;Implements IEquatable(Of Rectangle)" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
  <TypeSignature Language="F#" Value="type Rectangle = struct" />
  <TypeSignature Language="C++ CLI" Value="public value class Rectangle : IEquatable&lt;System::Drawing::Rectangle&gt;" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
  <TypeSignature Language="C#" Value="public struct Rectangle" FrameworkAlternate="netcore-1.0;netcore-1.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.0" />
  <TypeSignature Language="ILAsm" Value=".class public sequential ansi sealed beforefieldinit Rectangle extends System.ValueType" FrameworkAlternate="netcore-1.0;netcore-1.1;netstandard-2.0" />
  <TypeSignature Language="VB.NET" Value="Public Structure Rectangle" FrameworkAlternate="netcore-1.0;netcore-1.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.0" />
  <TypeSignature Language="C++ CLI" Value="public value class Rectangle" FrameworkAlternate="netcore-1.0;netcore-1.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.0" />
  <TypeSignature Language="ILAsm" Value=".class public sequential ansi serializable sealed beforefieldinit Rectangle extends System.ValueType" FrameworkAlternate="netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1" />
  <AssemblyInfo>
    <AssemblyName>System.Drawing.Primitives</AssemblyName>
    <AssemblyVersion>4.0.0.0</AssemblyVersion>
    <AssemblyVersion>4.1.0.0</AssemblyVersion>
    <AssemblyVersion>4.2.0.0</AssemblyVersion>
    <AssemblyVersion>4.2.1.0</AssemblyVersion>
    <AssemblyVersion>5.0.0.0</AssemblyVersion>
    <AssemblyVersion>6.0.0.0</AssemblyVersion>
    <AssemblyVersion>7.0.0.0</AssemblyVersion>
    <AssemblyVersion>8.0.0.0</AssemblyVersion>
    <AssemblyVersion>9.0.0.0</AssemblyVersion>
    <AssemblyVersion>10.0.0.0</AssemblyVersion>
    <AssemblyVersion>11.0.0.0</AssemblyVersion>
  </AssemblyInfo>
  <AssemblyInfo>
    <AssemblyName>System.Drawing</AssemblyName>
    <AssemblyVersion>1.0.5000.0</AssemblyVersion>
    <AssemblyVersion>2.0.0.0</AssemblyVersion>
    <AssemblyVersion>4.0.0.0</AssemblyVersion>
  </AssemblyInfo>
  <AssemblyInfo>
    <AssemblyName>netstandard</AssemblyName>
    <AssemblyVersion>2.0.0.0</AssemblyVersion>
    <AssemblyVersion>2.1.0.0</AssemblyVersion>
  </AssemblyInfo>
  <AssemblyInfo>
    <AssemblyName>System.Drawing.Common</AssemblyName>
  </AssemblyInfo>
  <TypeForwardingChain>
    <TypeForwarding From="netstandard" FromVersion="2.1.0.0" To="System.Drawing.Primitives" ToVersion="10.0.0.0" FrameworkAlternate="net-10.0" />
    <TypeForwarding From="System.Drawing.Common" FromVersion="11.0.0.0" To="System.Drawing.Primitives" ToVersion="10.0.0.0" FrameworkAlternate="net-10.0-pp" />
    <TypeForwarding From="netstandard" FromVersion="2.1.0.0" To="System.Drawing.Primitives" ToVersion="11.0.0.0" FrameworkAlternate="net-11.0" />
    <TypeForwarding From="System.Drawing.Common" FromVersion="11.0.0.0" To="System.Drawing.Primitives" ToVersion="11.0.0.0" FrameworkAlternate="net-11.0-pp;windowsdesktop-11.0" />
    <TypeForwarding From="netstandard" FromVersion="2.1.0.0" To="System.Drawing.Primitives" ToVersion="5.0.0.0" FrameworkAlternate="net-5.0" />
    <TypeForwarding From="netstandard" FromVersion="2.1.0.0" To="System.Drawing.Primitives" ToVersion="6.0.0.0" FrameworkAlternate="net-6.0" />
    <TypeForwarding From="netstandard" FromVersion="2.1.0.0" To="System.Drawing.Primitives" ToVersion="7.0.0.0" FrameworkAlternate="net-7.0" />
    <TypeForwarding From="netstandard" FromVersion="2.1.0.0" To="System.Drawing.Primitives" ToVersion="8.0.0.0" FrameworkAlternate="net-8.0" />
    <TypeForwarding From="netstandard" FromVersion="2.1.0.0" To="System.Drawing.Primitives" ToVersion="9.0.0.0" FrameworkAlternate="net-9.0" />
    <TypeForwarding From="System.Drawing.Common" FromVersion="10.0.0.0" To="System.Drawing.Primitives" ToVersion="10.0.0.0" FrameworkAlternate="windowsdesktop-10.0" />
    <TypeForwarding From="System.Drawing.Common" FromVersion="8.0.0.0" To="System.Drawing.Primitives" ToVersion="8.0.0.0" FrameworkAlternate="windowsdesktop-8.0" />
    <TypeForwarding From="System.Drawing.Common" FromVersion="9.0.0.0" To="System.Drawing.Primitives" ToVersion="9.0.0.0" FrameworkAlternate="windowsdesktop-9.0" />
  </TypeForwardingChain>
  <Base>
    <BaseTypeName>System.ValueType</BaseTypeName>
  </Base>
  <Interfaces>
    <Interface FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
      <InterfaceName>System.IEquatable&lt;System.Drawing.Rectangle&gt;</InterfaceName>
    </Interface>
  </Interfaces>
  <Attributes>
    <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
      <AttributeName Language="C#">[System.ComponentModel.TypeConverter("System.Drawing.RectangleConverter, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")]</AttributeName>
      <AttributeName Language="F#">[&lt;System.ComponentModel.TypeConverter("System.Drawing.RectangleConverter, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")&gt;]</AttributeName>
    </Attribute>
    <Attribute FrameworkAlternate="netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1">
      <AttributeName Language="C#">[System.ComponentModel.TypeConverter(typeof(System.Drawing.RectangleConverter))]</AttributeName>
      <AttributeName Language="F#">[&lt;System.ComponentModel.TypeConverter(typeof(System.Drawing.RectangleConverter))&gt;]</AttributeName>
    </Attribute>
    <Attribute FrameworkAlternate="netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1">
      <AttributeName Language="C#">[System.Runtime.InteropServices.ComVisible(true)]</AttributeName>
      <AttributeName Language="F#">[&lt;System.Runtime.InteropServices.ComVisible(true)&gt;]</AttributeName>
    </Attribute>
    <Attribute FrameworkAlternate="netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1">
      <AttributeName Language="C#">[System.Serializable]</AttributeName>
      <AttributeName Language="F#">[&lt;System.Serializable&gt;]</AttributeName>
    </Attribute>
  </Attributes>
  <Docs>
    <summary>Stores a set of four integers that represent the location and size of a rectangle.</summary>
    <remarks>
      <format type="text/markdown"><![CDATA[

## Remarks
 A rectangle is defined by its <xref:System.Drawing.Rectangle.Width*>, <xref:System.Drawing.Rectangle.Height*>, and upper-left corner represented by the <xref:System.Drawing.Rectangle.Location> property.

 To draw rectangles, you need a <xref:System.Drawing.Graphics> object and a <xref:System.Drawing.Pen> object. The <xref:System.Drawing.Graphics> object provides the <xref:System.Drawing.Graphics.DrawRectangle*> method, and the <xref:System.Drawing.Pen> object stores features of the line, such as color and width. The units the rectangle is drawn in is determined by the <xref:System.Drawing.Graphics.PageUnit*> and <xref:System.Drawing.Graphics.PageScale*> properties of the graphics object used for drawing. The default unit is pixels.

 To draw a <xref:System.Drawing.Rectangle> filled with color, you need a <xref:System.Drawing.Graphics> object and an object derived from <xref:System.Drawing.Brush> such as <xref:System.Drawing.SolidBrush> or <xref:System.Drawing.Drawing2D.LinearGradientBrush>. The <xref:System.Drawing.Graphics> object provides the <xref:System.Drawing.Graphics.FillRectangle*> method and the <xref:System.Drawing.Brush> object provides the color and fill information.

 For more advanced shapes, use a <xref:System.Drawing.Region> object.



## Examples
 The following example draws a rectangle with its upper-left corner at (10, 10). The rectangle has a width of 100 and a height of 50. The second argument passed to the <xref:System.Drawing.Pen.%23ctor*> constructor indicates that the pen width is 5 pixels.

 When the rectangle is drawn, the pen is centered on the rectangle's boundary. Because the pen width is 5, the sides of the rectangle are drawn 5 pixels wide, such that 1 pixel is drawn on the boundary itself, 2 pixels are drawn on the inside, and 2 pixels are drawn on the outside. For more details on pen alignment, see [How to: Set Pen Width and Alignment](/dotnet/framework/winforms/advanced/how-to-set-pen-width-and-alignment).

 The following illustration shows the resulting rectangle. The dotted lines show where the rectangle would have been drawn if the pen width had been one pixel. The enlarged view of the upper-left corner of the rectangle shows that the thick black lines are centered on those dotted lines.

 ![Pens](~/add/media/pens1.gif)

 The example is designed for use with Windows Forms, and it requires <xref:System.Windows.Forms.PaintEventArgs> `e`, which is a parameter of the <xref:System.Windows.Forms.Control.Paint> event handler.

 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Rectangle/Overview/Class1.cs" id="Snippet21":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Rectangle/Overview/Class1.vb" id="Snippet21":::

 ]]></format>
    </remarks>
  </Docs>
  <Members>
    <MemberGroup MemberName=".ctor">
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Docs>
        <summary>Initializes a new instance of the <see cref="T:System.Drawing.Rectangle" /> class with the specified location and size.</summary>
      </Docs>
    </MemberGroup>
    <Member MemberName=".ctor">
      <MemberSignature Language="C#" Value="public Rectangle (System.Drawing.Point location, System.Drawing.Size size);" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig specialname rtspecialname instance void .ctor(valuetype System.Drawing.Point location, valuetype System.Drawing.Size size) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.#ctor(System.Drawing.Point,System.Drawing.Size)" />
      <MemberSignature Language="VB.NET" Value="Public Sub New (location As Point, size As Size)" />
      <MemberSignature Language="F#" Value="new System.Drawing.Rectangle : System.Drawing.Point * System.Drawing.Size -&gt; System.Drawing.Rectangle" Usage="new System.Drawing.Rectangle (location, size)" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; Rectangle(System::Drawing::Point location, System::Drawing::Size size);" />
      <MemberType>Constructor</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Parameters>
        <Parameter Name="location" Type="System.Drawing.Point" />
        <Parameter Name="size" Type="System.Drawing.Size" />
      </Parameters>
      <Docs>
        <param name="location">A <see cref="T:System.Drawing.Point" /> that represents the upper-left corner of the rectangular region.</param>
        <param name="size">A <see cref="T:System.Drawing.Size" /> that represents the width and height of the rectangular region.</param>
        <summary>Initializes a new instance of the <see cref="T:System.Drawing.Rectangle" /> class with the specified location and size.</summary>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName=".ctor">
      <MemberSignature Language="C#" Value="public Rectangle (int x, int y, int width, int height);" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig specialname rtspecialname instance void .ctor(int32 x, int32 y, int32 width, int32 height) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.#ctor(System.Int32,System.Int32,System.Int32,System.Int32)" />
      <MemberSignature Language="VB.NET" Value="Public Sub New (x As Integer, y As Integer, width As Integer, height As Integer)" />
      <MemberSignature Language="F#" Value="new System.Drawing.Rectangle : int * int * int * int -&gt; System.Drawing.Rectangle" Usage="new System.Drawing.Rectangle (x, y, width, height)" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; Rectangle(int x, int y, int width, int height);" />
      <MemberType>Constructor</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <Parameters>
        <Parameter Name="x" Type="System.Int32" />
        <Parameter Name="y" Type="System.Int32" />
        <Parameter Name="width" Type="System.Int32" />
        <Parameter Name="height" Type="System.Int32" />
      </Parameters>
      <Docs>
        <param name="x">The x-coordinate of the upper-left corner of the rectangle.</param>
        <param name="y">The y-coordinate of the upper-left corner of the rectangle.</param>
        <param name="width">The width of the rectangle.</param>
        <param name="height">The height of the rectangle.</param>
        <summary>Initializes a new instance of the <see cref="T:System.Drawing.Rectangle" /> class with the specified location and size.</summary>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Examples
 The following code example demonstrates the <xref:System.Drawing.Rectangle.%23ctor*>, <xref:System.Drawing.Rectangle.Intersect*>, <xref:System.Drawing.Rectangle.IsEmpty*>, and <xref:System.Drawing.Rectangle.IntersectsWith*> members. This example should be used with a Windows Form. Paste this code into a form and call this method when handling the form's <xref:System.Windows.Forms.Control.Paint> event, passing `e` as <xref:System.Windows.Forms.PaintEventArgs>.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet2":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet2":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet2":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Bottom">
      <MemberSignature Language="C#" Value="public int Bottom { get; }" />
      <MemberSignature Language="ILAsm" Value=".property instance int32 Bottom" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.Bottom" />
      <MemberSignature Language="VB.NET" Value="Public ReadOnly Property Bottom As Integer" />
      <MemberSignature Language="F#" Value="member this.Bottom : int" Usage="System.Drawing.Rectangle.Bottom" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property int Bottom { int get(); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.ComponentModel.Browsable(false)]</AttributeName>
          <AttributeName Language="F#">[&lt;System.ComponentModel.Browsable(false)&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Int32</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets the y-coordinate that is the sum of the <see cref="P:System.Drawing.Rectangle.Y" /> and <see cref="P:System.Drawing.Rectangle.Height" /> property values of this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <value>The y-coordinate that is the sum of <see cref="P:System.Drawing.Rectangle.Y" /> and <see cref="P:System.Drawing.Rectangle.Height" /> of this <see cref="T:System.Drawing.Rectangle" />.</value>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 The value of the <xref:System.Drawing.Rectangle.Bottom> property represents the y-coordinate of the first point at the bottom edge of the <xref:System.Drawing.Rectangle> that is not contained in the <xref:System.Drawing.Rectangle>.

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Ceiling">
      <MemberSignature Language="C#" Value="public static System.Drawing.Rectangle Ceiling (System.Drawing.RectangleF value);" />
      <MemberSignature Language="ILAsm" Value=".method public static hidebysig valuetype System.Drawing.Rectangle Ceiling(valuetype System.Drawing.RectangleF value) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Ceiling(System.Drawing.RectangleF)" />
      <MemberSignature Language="VB.NET" Value="Public Shared Function Ceiling (value As RectangleF) As Rectangle" />
      <MemberSignature Language="F#" Value="static member Ceiling : System.Drawing.RectangleF -&gt; System.Drawing.Rectangle" Usage="System.Drawing.Rectangle.Ceiling value" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; static System::Drawing::Rectangle Ceiling(System::Drawing::RectangleF value);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Drawing.Rectangle</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="value" Type="System.Drawing.RectangleF" />
      </Parameters>
      <Docs>
        <param name="value">The <see cref="T:System.Drawing.RectangleF" /> structure to be converted.</param>
        <summary>Converts the specified <see cref="T:System.Drawing.RectangleF" /> structure to a <see cref="T:System.Drawing.Rectangle" /> structure by rounding the <see cref="T:System.Drawing.RectangleF" /> values to the next higher integer values.</summary>
        <returns>Returns a <see cref="T:System.Drawing.Rectangle" />.</returns>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <MemberGroup MemberName="Contains">
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Docs>
        <summary>Determines if the specified point is contained within the rectangular region defined by this <see cref="T:System.Drawing.Rectangle" />.</summary>
      </Docs>
    </MemberGroup>
    <Member MemberName="Contains">
      <MemberSignature Language="C#" Value="public readonly bool Contains (System.Drawing.Point pt);" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig instance bool Contains(valuetype System.Drawing.Point pt) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Contains(System.Drawing.Point)" />
      <MemberSignature Language="VB.NET" Value="Public Function Contains (pt As Point) As Boolean" />
      <MemberSignature Language="F#" Value="member this.Contains : System.Drawing.Point -&gt; bool" Usage="rectangle.Contains pt" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; bool Contains(System::Drawing::Point pt);" />
      <MemberSignature Language="C#" Value="public bool Contains (System.Drawing.Point pt);" FrameworkAlternate="netcore-1.0;netcore-1.1;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.0;netstandard-2.1" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="pt" Type="System.Drawing.Point" />
      </Parameters>
      <Docs>
        <param name="pt">The <see cref="T:System.Drawing.Point" /> to test.</param>
        <summary>Determines if the specified point is contained within this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <returns>This method returns <see langword="true" /> if the point represented by <paramref name="pt" /> is contained within this <see cref="T:System.Drawing.Rectangle" /> structure; otherwise <see langword="false" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 The containing rectangle must be normalized for this method to return accurate results.

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Contains">
      <MemberSignature Language="C#" Value="public readonly bool Contains (System.Drawing.Rectangle rect);" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig instance bool Contains(valuetype System.Drawing.Rectangle rect) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Contains(System.Drawing.Rectangle)" />
      <MemberSignature Language="VB.NET" Value="Public Function Contains (rect As Rectangle) As Boolean" />
      <MemberSignature Language="F#" Value="member this.Contains : System.Drawing.Rectangle -&gt; bool" Usage="rectangle.Contains rect" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; bool Contains(System::Drawing::Rectangle rect);" />
      <MemberSignature Language="C#" Value="public bool Contains (System.Drawing.Rectangle rect);" FrameworkAlternate="netcore-1.0;netcore-1.1;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.0;netstandard-2.1" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="rect" Type="System.Drawing.Rectangle" />
      </Parameters>
      <Docs>
        <param name="rect">The <see cref="T:System.Drawing.Rectangle" /> to test.</param>
        <summary>Determines if the rectangular region represented by <paramref name="rect" /> is entirely contained within this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <returns>This method returns <see langword="true" /> if the rectangular region represented by <paramref name="rect" /> is entirely contained within this <see cref="T:System.Drawing.Rectangle" /> structure; otherwise <see langword="false" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 The containing rectangle must be normalized for this method to return accurate results.



## Examples
 The following code example demonstrates the <xref:System.Drawing.Rectangle.Contains*> method and the <xref:System.Drawing.SystemPens> class. This example is designed for use with a Windows Form. Paste this code into a form that contains a button named `Button1`, call `DrawFirstRectangle` from the form's constructor or <xref:System.Windows.Forms.Form.Load> method, and associate the `Button1_Click` method with the button's <xref:System.Windows.Forms.Control.Click> event.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet3":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet3":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet3":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Contains">
      <MemberSignature Language="C#" Value="public readonly bool Contains (int x, int y);" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig instance bool Contains(int32 x, int32 y) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Contains(System.Int32,System.Int32)" />
      <MemberSignature Language="VB.NET" Value="Public Function Contains (x As Integer, y As Integer) As Boolean" />
      <MemberSignature Language="F#" Value="member this.Contains : int * int -&gt; bool" Usage="rectangle.Contains (x, y)" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; bool Contains(int x, int y);" />
      <MemberSignature Language="C#" Value="public bool Contains (int x, int y);" FrameworkAlternate="netcore-1.0;netcore-1.1;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.0;netstandard-2.1" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="x" Type="System.Int32" />
        <Parameter Name="y" Type="System.Int32" />
      </Parameters>
      <Docs>
        <param name="x">The x-coordinate of the point to test.</param>
        <param name="y">The y-coordinate of the point to test.</param>
        <summary>Determines if the specified point is contained within this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <returns>This method returns <see langword="true" /> if the point defined by <paramref name="x" /> and <paramref name="y" /> is contained within this <see cref="T:System.Drawing.Rectangle" /> structure; otherwise <see langword="false" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 The containing rectangle must be normalized for this method to return accurate results.

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Empty">
      <MemberSignature Language="C#" Value="public static readonly System.Drawing.Rectangle Empty;" />
      <MemberSignature Language="ILAsm" Value=".field public static initonly valuetype System.Drawing.Rectangle Empty" />
      <MemberSignature Language="DocId" Value="F:System.Drawing.Rectangle.Empty" />
      <MemberSignature Language="VB.NET" Value="Public Shared ReadOnly Empty As Rectangle " />
      <MemberSignature Language="F#" Value=" staticval mutable Empty : System.Drawing.Rectangle" Usage="System.Drawing.Rectangle.Empty" />
      <MemberSignature Language="C++ CLI" Value="public: static initonly System::Drawing::Rectangle Empty;" />
      <MemberType>Field</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Drawing.Rectangle</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Represents a <see cref="T:System.Drawing.Rectangle" /> structure with its properties left uninitialized.</summary>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 A rectangle is defined by its width, height and upper-left corner.

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Equals">
      <MemberSignature Language="C#" Value="public readonly bool Equals (System.Drawing.Rectangle other);" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig newslot virtual instance bool Equals(valuetype System.Drawing.Rectangle other) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Equals(System.Drawing.Rectangle)" />
      <MemberSignature Language="VB.NET" Value="Public Function Equals (other As Rectangle) As Boolean" />
      <MemberSignature Language="F#" Value="override this.Equals : System.Drawing.Rectangle -&gt; bool" Usage="rectangle.Equals other" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; virtual bool Equals(System::Drawing::Rectangle other);" />
      <MemberSignature Language="C#" Value="public bool Equals (System.Drawing.Rectangle other);" FrameworkAlternate="netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netstandard-2.1" />
      <MemberType>Method</MemberType>
      <Implements>
        <InterfaceMember>M:System.IEquatable`1.Equals(`0)</InterfaceMember>
      </Implements>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="other" Type="System.Drawing.Rectangle" Index="0" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
      </Parameters>
      <Docs>
        <param name="other">An object to compare with this object.</param>
        <summary>Indicates whether the current object is equal to another object of the same type.</summary>
        <returns>
          <see langword="true" /> if the current object is equal to <paramref name="other" />; otherwise, <see langword="false" />.</returns>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="Equals">
      <MemberSignature Language="C#" Value="public override readonly bool Equals (object? obj);" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig virtual instance bool Equals(object obj) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Equals(System.Object)" />
      <MemberSignature Language="VB.NET" Value="Public Overrides Function Equals (obj As Object) As Boolean" />
      <MemberSignature Language="F#" Value="override this.Equals : obj -&gt; bool" Usage="rectangle.Equals obj" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; override bool Equals(System::Object ^ obj);" />
      <MemberSignature Language="C#" Value="public override bool Equals (object obj);" FrameworkAlternate="netcore-1.0;netcore-1.1;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.0;netstandard-2.1" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="obj" Type="System.Object">
          <Attributes>
            <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
              <AttributeName Language="C#">[System.Diagnostics.CodeAnalysis.NotNullWhen(true)]</AttributeName>
              <AttributeName Language="F#">[&lt;System.Diagnostics.CodeAnalysis.NotNullWhen(true)&gt;]</AttributeName>
            </Attribute>
          </Attributes>
        </Parameter>
      </Parameters>
      <Docs>
        <param name="obj">The <see cref="T:System.Object" /> to test.</param>
        <summary>Tests whether <paramref name="obj" /> is a <see cref="T:System.Drawing.Rectangle" /> structure with the same location and size of this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <returns>This method returns <see langword="true" /> if <paramref name="obj" /> is a <see cref="T:System.Drawing.Rectangle" /> structure and its <see cref="P:System.Drawing.Rectangle.X" />, <see cref="P:System.Drawing.Rectangle.Y" />, <see cref="P:System.Drawing.Rectangle.Width" />, and <see cref="P:System.Drawing.Rectangle.Height" /> properties are equal to the corresponding properties of this <see cref="T:System.Drawing.Rectangle" /> structure; otherwise, <see langword="false" />.</returns>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="FromLTRB">
      <MemberSignature Language="C#" Value="public static System.Drawing.Rectangle FromLTRB (int left, int top, int right, int bottom);" />
      <MemberSignature Language="ILAsm" Value=".method public static hidebysig valuetype System.Drawing.Rectangle FromLTRB(int32 left, int32 top, int32 right, int32 bottom) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.FromLTRB(System.Int32,System.Int32,System.Int32,System.Int32)" />
      <MemberSignature Language="VB.NET" Value="Public Shared Function FromLTRB (left As Integer, top As Integer, right As Integer, bottom As Integer) As Rectangle" />
      <MemberSignature Language="F#" Value="static member FromLTRB : int * int * int * int -&gt; System.Drawing.Rectangle" Usage="System.Drawing.Rectangle.FromLTRB (left, top, right, bottom)" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; static System::Drawing::Rectangle FromLTRB(int left, int top, int right, int bottom);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2">
          <AttributeName Language="C#">[System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Drawing.Rectangle</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="left" Type="System.Int32" />
        <Parameter Name="top" Type="System.Int32" />
        <Parameter Name="right" Type="System.Int32" />
        <Parameter Name="bottom" Type="System.Int32" />
      </Parameters>
      <Docs>
        <param name="left">The x-coordinate of the upper-left corner of this <see cref="T:System.Drawing.Rectangle" /> structure.</param>
        <param name="top">The y-coordinate of the upper-left corner of this <see cref="T:System.Drawing.Rectangle" /> structure.</param>
        <param name="right">The x-coordinate of the lower-right corner of this <see cref="T:System.Drawing.Rectangle" /> structure.</param>
        <param name="bottom">The y-coordinate of the lower-right corner of this <see cref="T:System.Drawing.Rectangle" /> structure.</param>
        <summary>Creates a <see cref="T:System.Drawing.Rectangle" /> structure with the specified edge locations.</summary>
        <returns>The new <see cref="T:System.Drawing.Rectangle" /> that this method creates.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 This method creates a <xref:System.Drawing.Rectangle> with the specified upper-left and lower-right corners.



## Examples
 The following code example demonstrates how to create a rectangle using the <xref:System.Drawing.Rectangle.FromLTRB*> method. This example is designed to be used with a Windows Form. Paste this code into a form and call the `CreateARectangleFromLTRB` method when handling the form's <xref:System.Windows.Forms.Control.Paint> event, passing `e` as <xref:System.Windows.Forms.PaintEventArgs>.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet7":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet7":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet7":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="GetHashCode">
      <MemberSignature Language="C#" Value="public override readonly int GetHashCode ();" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig virtual instance int32 GetHashCode() cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.GetHashCode" />
      <MemberSignature Language="VB.NET" Value="Public Overrides Function GetHashCode () As Integer" />
      <MemberSignature Language="F#" Value="override this.GetHashCode : unit -&gt; int" Usage="rectangle.GetHashCode " />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; override int GetHashCode();" />
      <MemberSignature Language="C#" Value="public override int GetHashCode ();" FrameworkAlternate="netcore-1.0;netcore-1.1;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.0;netstandard-2.1" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Int32</ReturnType>
      </ReturnValue>
      <Parameters />
      <Docs>
        <summary>Returns the hash code for this <see cref="T:System.Drawing.Rectangle" /> structure. For information about the use of hash codes, see <see cref="M:System.Object.GetHashCode" /> .</summary>
        <returns>An integer that represents the hash code for this rectangle.</returns>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="Height">
      <MemberSignature Language="C#" Value="public int Height { get; set; }" />
      <MemberSignature Language="ILAsm" Value=".property instance int32 Height" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.Height" />
      <MemberSignature Language="VB.NET" Value="Public Property Height As Integer" />
      <MemberSignature Language="F#" Value="member this.Height : int with get, set" Usage="System.Drawing.Rectangle.Height" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property int Height { int get(); void set(int value); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Int32</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets or sets the height of this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <value>The height of this <see cref="T:System.Drawing.Rectangle" /> structure. The default is 0.</value>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 Changing the <xref:System.Drawing.Rectangle.Height> property will also cause a change in the <xref:System.Drawing.Rectangle.Bottom> property of the <xref:System.Drawing.Rectangle>. The units the rectangle is drawn in is determined by the <xref:System.Drawing.Graphics.PageUnit*> and <xref:System.Drawing.Graphics.PageScale*> properties of the graphics object used for drawing. The default unit is pixels.

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <MemberGroup MemberName="Inflate">
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Docs>
        <summary>Enlarges a <see cref="T:System.Drawing.Rectangle" /> structure by the specified amount.</summary>
      </Docs>
    </MemberGroup>
    <Member MemberName="Inflate">
      <MemberSignature Language="C#" Value="public void Inflate (System.Drawing.Size size);" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig instance void Inflate(valuetype System.Drawing.Size size) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Inflate(System.Drawing.Size)" />
      <MemberSignature Language="VB.NET" Value="Public Sub Inflate (size As Size)" />
      <MemberSignature Language="F#" Value="member this.Inflate : System.Drawing.Size -&gt; unit" Usage="rectangle.Inflate size" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; void Inflate(System::Drawing::Size size);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="size" Type="System.Drawing.Size" />
      </Parameters>
      <Docs>
        <param name="size">The amount to inflate this rectangle.</param>
        <summary>Enlarges this <see cref="T:System.Drawing.Rectangle" /> by the specified amount.</summary>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 This method enlarges this rectangle, not a copy of it. The rectangle is enlarged in both directions along an axis.  For example, if a 50 by 50 rectangle is enlarged by 50 in the x-axis, the resultant rectangle will be 150 units long (the original 50, the 50 in the minus direction, and the 50 in the plus direction) maintaining the rectangle's geometric center.



## Examples
 The following example is designed for use with Windows Forms, and it requires <xref:System.Windows.Forms.PaintEventArgs> `e`, which is a parameter of the <xref:System.Windows.Forms.Control.Paint> event handler. The code creates a <xref:System.Drawing.Rectangle> and enlarges it by 50 units in both axes. The rectangle is drawn to screen before inflation (black) and after inflation (red).

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.ClassicRectangleExamples/CPP/form1.cpp" id="Snippet2":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Rectangle/Inflate/form1.cs" id="Snippet2":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Rectangle/Inflate/form1.vb" id="Snippet2":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Inflate">
      <MemberSignature Language="C#" Value="public void Inflate (int width, int height);" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig instance void Inflate(int32 width, int32 height) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Inflate(System.Int32,System.Int32)" />
      <MemberSignature Language="VB.NET" Value="Public Sub Inflate (width As Integer, height As Integer)" />
      <MemberSignature Language="F#" Value="member this.Inflate : int * int -&gt; unit" Usage="rectangle.Inflate (width, height)" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; void Inflate(int width, int height);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2">
          <AttributeName Language="C#">[System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="width" Type="System.Int32" />
        <Parameter Name="height" Type="System.Int32" />
      </Parameters>
      <Docs>
        <param name="width">The amount to inflate this <see cref="T:System.Drawing.Rectangle" /> horizontally.</param>
        <param name="height">The amount to inflate this <see cref="T:System.Drawing.Rectangle" /> vertically.</param>
        <summary>Enlarges this <see cref="T:System.Drawing.Rectangle" /> by the specified amount.</summary>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 This method enlarges this rectangle, not a copy of it. The rectangle is enlarged in both directions along an axis. For example, if a 50 by 50 rectangle is enlarged by 50 in the x-axis, the resultant rectangle will be 150 units long (the original 50, the 50 in the minus direction, and the 50 in the plus direction) maintaining the rectangle's geometric center.

 If either `x` or `y` is negative, the <xref:System.Drawing.Rectangle> structure is deflated in the corresponding direction.



## Examples
 The following example creates a <xref:System.Drawing.Rectangle> structure and enlarges it by 100 units in the x-axis direction:

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.ClassicRectangleExamples/CPP/form1.cpp" id="Snippet3":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Rectangle/Inflate/form1.cs" id="Snippet3":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Rectangle/Inflate/form1.vb" id="Snippet3":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Inflate">
      <MemberSignature Language="C#" Value="public static System.Drawing.Rectangle Inflate (System.Drawing.Rectangle rect, int x, int y);" />
      <MemberSignature Language="ILAsm" Value=".method public static hidebysig valuetype System.Drawing.Rectangle Inflate(valuetype System.Drawing.Rectangle rect, int32 x, int32 y) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Inflate(System.Drawing.Rectangle,System.Int32,System.Int32)" />
      <MemberSignature Language="VB.NET" Value="Public Shared Function Inflate (rect As Rectangle, x As Integer, y As Integer) As Rectangle" />
      <MemberSignature Language="F#" Value="static member Inflate : System.Drawing.Rectangle * int * int -&gt; System.Drawing.Rectangle" Usage="System.Drawing.Rectangle.Inflate (rect, x, y)" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; static System::Drawing::Rectangle Inflate(System::Drawing::Rectangle rect, int x, int y);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Drawing.Rectangle</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="rect" Type="System.Drawing.Rectangle" />
        <Parameter Name="x" Type="System.Int32" />
        <Parameter Name="y" Type="System.Int32" />
      </Parameters>
      <Docs>
        <param name="rect">The <see cref="T:System.Drawing.Rectangle" /> with which to start. This rectangle is not modified.</param>
        <param name="x">The amount to inflate this <see cref="T:System.Drawing.Rectangle" /> horizontally.</param>
        <param name="y">The amount to inflate this <see cref="T:System.Drawing.Rectangle" /> vertically.</param>
        <summary>Creates and returns an enlarged copy of the specified <see cref="T:System.Drawing.Rectangle" /> structure. The copy is enlarged by the specified amount. The original <see cref="T:System.Drawing.Rectangle" /> structure remains unmodified.</summary>
        <returns>The enlarged <see cref="T:System.Drawing.Rectangle" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 This method makes a copy of `rect`, enlarges the copy, and then returns the enlarged copy. The rectangle is enlarged in both directions along an axis. For example, if a 50 by 50 rectangle is enlarged by 50 in the x-axis, the resultant rectangle will be 150 units long (the original 50, the 50 in the minus direction, and the 50 in the plus direction) maintaining the rectangle's geometric center.



## Examples
 The following example is designed for use with Windows Forms, and it requires <xref:System.Windows.Forms.PaintEventArgs> `e`, which is a parameter of the <xref:System.Windows.Forms.Control.Paint> event handler. The code creates a <xref:System.Drawing.Rectangle> and enlarges it by 50 units in both axes. Notice that the resulting rectangle (red) is 150 units in both axes.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.ClassicRectangleExamples/CPP/form1.cpp" id="Snippet1":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Rectangle/Inflate/form1.cs" id="Snippet1":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Rectangle/Inflate/form1.vb" id="Snippet1":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <MemberGroup MemberName="Intersect">
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Docs>
        <summary>Determines the <see cref="T:System.Drawing.Rectangle" /> structure that represents the intersection of two rectangles.</summary>
      </Docs>
    </MemberGroup>
    <Member MemberName="Intersect">
      <MemberSignature Language="C#" Value="public void Intersect (System.Drawing.Rectangle rect);" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig instance void Intersect(valuetype System.Drawing.Rectangle rect) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Intersect(System.Drawing.Rectangle)" />
      <MemberSignature Language="VB.NET" Value="Public Sub Intersect (rect As Rectangle)" />
      <MemberSignature Language="F#" Value="member this.Intersect : System.Drawing.Rectangle -&gt; unit" Usage="rectangle.Intersect rect" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; void Intersect(System::Drawing::Rectangle rect);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="rect" Type="System.Drawing.Rectangle" />
      </Parameters>
      <Docs>
        <param name="rect">The <see cref="T:System.Drawing.Rectangle" /> with which to intersect.</param>
        <summary>Replaces this <see cref="T:System.Drawing.Rectangle" /> with the intersection of itself and the specified <see cref="T:System.Drawing.Rectangle" />.</summary>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Examples
 The following code example demonstrates the <xref:System.Drawing.Rectangle.Intersect*>, <xref:System.Drawing.Rectangle.IsEmpty*> and the <xref:System.Drawing.Rectangle.IntersectsWith*> members. This example should be used with a Windows Form. Paste this code into a form and call this method when handling the form's <xref:System.Windows.Forms.Control.Paint> event, passing `e` as <xref:System.Windows.Forms.PaintEventArgs>.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet2":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet2":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet2":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Intersect">
      <MemberSignature Language="C#" Value="public static System.Drawing.Rectangle Intersect (System.Drawing.Rectangle a, System.Drawing.Rectangle b);" />
      <MemberSignature Language="ILAsm" Value=".method public static hidebysig valuetype System.Drawing.Rectangle Intersect(valuetype System.Drawing.Rectangle a, valuetype System.Drawing.Rectangle b) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Intersect(System.Drawing.Rectangle,System.Drawing.Rectangle)" />
      <MemberSignature Language="VB.NET" Value="Public Shared Function Intersect (a As Rectangle, b As Rectangle) As Rectangle" />
      <MemberSignature Language="F#" Value="static member Intersect : System.Drawing.Rectangle * System.Drawing.Rectangle -&gt; System.Drawing.Rectangle" Usage="System.Drawing.Rectangle.Intersect (a, b)" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; static System::Drawing::Rectangle Intersect(System::Drawing::Rectangle a, System::Drawing::Rectangle b);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Drawing.Rectangle</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="a" Type="System.Drawing.Rectangle" />
        <Parameter Name="b" Type="System.Drawing.Rectangle" />
      </Parameters>
      <Docs>
        <param name="a">A rectangle to intersect.</param>
        <param name="b">A rectangle to intersect.</param>
        <summary>Returns a third <see cref="T:System.Drawing.Rectangle" /> structure that represents the intersection of two other <see cref="T:System.Drawing.Rectangle" /> structures. If there is no intersection, an empty <see cref="T:System.Drawing.Rectangle" /> is returned.</summary>
        <returns>A <see cref="T:System.Drawing.Rectangle" /> that represents the intersection of <paramref name="a" /> and <paramref name="b" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Examples
 The following code example demonstrates the <xref:System.Drawing.Rectangle.Intersect*>, <xref:System.Drawing.Rectangle.IsEmpty*> and the <xref:System.Drawing.Rectangle.IntersectsWith*> members. This example should be used with a Windows Form. Paste this code into a form and call this method when handling the form's <xref:System.Windows.Forms.Control.Paint> event, passing `e` as <xref:System.Windows.Forms.PaintEventArgs>.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet1":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet1":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet1":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="IntersectsWith">
      <MemberSignature Language="C#" Value="public readonly bool IntersectsWith (System.Drawing.Rectangle rect);" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig instance bool IntersectsWith(valuetype System.Drawing.Rectangle rect) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.IntersectsWith(System.Drawing.Rectangle)" />
      <MemberSignature Language="VB.NET" Value="Public Function IntersectsWith (rect As Rectangle) As Boolean" />
      <MemberSignature Language="F#" Value="member this.IntersectsWith : System.Drawing.Rectangle -&gt; bool" Usage="rectangle.IntersectsWith rect" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; bool IntersectsWith(System::Drawing::Rectangle rect);" />
      <MemberSignature Language="C#" Value="public bool IntersectsWith (System.Drawing.Rectangle rect);" FrameworkAlternate="netcore-1.0;netcore-1.1;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.0;netstandard-2.1" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="rect" Type="System.Drawing.Rectangle" />
      </Parameters>
      <Docs>
        <param name="rect">The rectangle to test.</param>
        <summary>Determines if this rectangle intersects with <paramref name="rect" />.</summary>
        <returns>This method returns <see langword="true" /> if there is any intersection, otherwise <see langword="false" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Examples
 The following code example demonstrates the <xref:System.Drawing.Rectangle.Intersect*>, <xref:System.Drawing.Rectangle.IsEmpty*> and the <xref:System.Drawing.Rectangle.IntersectsWith*> members. This example should be used with a Windows Form. Paste this code into a form and call this method when handling the form's <xref:System.Windows.Forms.Control.Paint> event, passing `e` as <xref:System.Windows.Forms.PaintEventArgs>.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet2":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet2":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet2":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="IsEmpty">
      <MemberSignature Language="C#" Value="public bool IsEmpty { get; }" />
      <MemberSignature Language="ILAsm" Value=".property instance bool IsEmpty" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.IsEmpty" />
      <MemberSignature Language="VB.NET" Value="Public ReadOnly Property IsEmpty As Boolean" />
      <MemberSignature Language="F#" Value="member this.IsEmpty : bool" Usage="System.Drawing.Rectangle.IsEmpty" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property bool IsEmpty { bool get(); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.ComponentModel.Browsable(false)]</AttributeName>
          <AttributeName Language="F#">[&lt;System.ComponentModel.Browsable(false)&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Tests whether all numeric properties of this <see cref="T:System.Drawing.Rectangle" /> have values of zero.</summary>
        <value>This property returns <see langword="true" /> if the <see cref="P:System.Drawing.Rectangle.Width" />, <see cref="P:System.Drawing.Rectangle.Height" />, <see cref="P:System.Drawing.Rectangle.X" />, and <see cref="P:System.Drawing.Rectangle.Y" /> properties of this <see cref="T:System.Drawing.Rectangle" /> all have values of zero; otherwise, <see langword="false" />.</value>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Examples
 The following code example demonstrates the <xref:System.Drawing.Rectangle.Intersect*>, <xref:System.Drawing.Rectangle.IsEmpty*> and the <xref:System.Drawing.Rectangle.IntersectsWith*> members. This example should be used with a Windows Form. Paste this code into a form and call this method when handling the form's <xref:System.Windows.Forms.Control.Paint> event, passing `e` as <xref:System.Windows.Forms.PaintEventArgs>.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet2":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet2":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet2":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Left">
      <MemberSignature Language="C#" Value="public int Left { get; }" />
      <MemberSignature Language="ILAsm" Value=".property instance int32 Left" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.Left" />
      <MemberSignature Language="VB.NET" Value="Public ReadOnly Property Left As Integer" />
      <MemberSignature Language="F#" Value="member this.Left : int" Usage="System.Drawing.Rectangle.Left" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property int Left { int get(); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.ComponentModel.Browsable(false)]</AttributeName>
          <AttributeName Language="F#">[&lt;System.ComponentModel.Browsable(false)&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Int32</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets the x-coordinate of the left edge of this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <value>The x-coordinate of the left edge of this <see cref="T:System.Drawing.Rectangle" /> structure.</value>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="Location">
      <MemberSignature Language="C#" Value="public System.Drawing.Point Location { get; set; }" />
      <MemberSignature Language="ILAsm" Value=".property instance valuetype System.Drawing.Point Location" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.Location" />
      <MemberSignature Language="VB.NET" Value="Public Property Location As Point" />
      <MemberSignature Language="F#" Value="member this.Location : System.Drawing.Point with get, set" Usage="System.Drawing.Rectangle.Location" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property System::Drawing::Point Location { System::Drawing::Point get(); void set(System::Drawing::Point value); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.ComponentModel.Browsable(false)]</AttributeName>
          <AttributeName Language="F#">[&lt;System.ComponentModel.Browsable(false)&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2">
          <AttributeName Language="C#">[set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Drawing.Point</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets or sets the coordinates of the upper-left corner of this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <value>A <see cref="T:System.Drawing.Point" /> that represents the upper-left corner of this <see cref="T:System.Drawing.Rectangle" /> structure.</value>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <MemberGroup MemberName="Offset">
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Docs>
        <summary>Adjusts the location of this rectangle by the specified amount.</summary>
      </Docs>
    </MemberGroup>
    <Member MemberName="Offset">
      <MemberSignature Language="C#" Value="public void Offset (System.Drawing.Point pos);" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig instance void Offset(valuetype System.Drawing.Point pos) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Offset(System.Drawing.Point)" />
      <MemberSignature Language="VB.NET" Value="Public Sub Offset (pos As Point)" />
      <MemberSignature Language="F#" Value="member this.Offset : System.Drawing.Point -&gt; unit" Usage="rectangle.Offset pos" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; void Offset(System::Drawing::Point pos);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="pos" Type="System.Drawing.Point" />
      </Parameters>
      <Docs>
        <param name="pos">Amount to offset the location.</param>
        <summary>Adjusts the location of this rectangle by the specified amount.</summary>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 This method adjusts the location of the upper-left corner horizontally by the x-coordinate of the specified point, and vertically by the y-coordinate of the specified point.



## Examples
 The following code example demonstrates the <xref:System.Drawing.Rectangle.Contains*>, and <xref:System.Drawing.Rectangle.Offset*> methods and the <xref:System.Drawing.SystemPens> class. This example is designed for use with a Windows Form. Paste this code into a form that contains a button named `Button1`, call `DrawFirstRectangle` from the form's constructor or <xref:System.Windows.Forms.Form.Load> method, and associate the `Button1_Click` method with the button's <xref:System.Windows.Forms.Control.Click> event.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet3":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet3":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet3":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Offset">
      <MemberSignature Language="C#" Value="public void Offset (int x, int y);" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig instance void Offset(int32 x, int32 y) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Offset(System.Int32,System.Int32)" />
      <MemberSignature Language="VB.NET" Value="Public Sub Offset (x As Integer, y As Integer)" />
      <MemberSignature Language="F#" Value="member this.Offset : int * int -&gt; unit" Usage="rectangle.Offset (x, y)" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; void Offset(int x, int y);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2">
          <AttributeName Language="C#">[System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="x" Type="System.Int32" />
        <Parameter Name="y" Type="System.Int32" />
      </Parameters>
      <Docs>
        <param name="x">The horizontal offset.</param>
        <param name="y">The vertical offset.</param>
        <summary>Adjusts the location of this rectangle by the specified amount.</summary>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="op_Equality">
      <MemberSignature Language="C#" Value="public static bool operator == (System.Drawing.Rectangle left, System.Drawing.Rectangle right);" />
      <MemberSignature Language="ILAsm" Value=".method public static hidebysig specialname bool op_Equality(valuetype System.Drawing.Rectangle left, valuetype System.Drawing.Rectangle right) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.op_Equality(System.Drawing.Rectangle,System.Drawing.Rectangle)" />
      <MemberSignature Language="VB.NET" Value="Public Shared Operator == (left As Rectangle, right As Rectangle) As Boolean" />
      <MemberSignature Language="F#" Value="static member ( = ) : System.Drawing.Rectangle * System.Drawing.Rectangle -&gt; bool" Usage="left = right" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; static bool operator ==(System::Drawing::Rectangle left, System::Drawing::Rectangle right);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="left" Type="System.Drawing.Rectangle" />
        <Parameter Name="right" Type="System.Drawing.Rectangle" />
      </Parameters>
      <Docs>
        <param name="left">The <see cref="T:System.Drawing.Rectangle" /> structure that is to the left of the equality operator.</param>
        <param name="right">The <see cref="T:System.Drawing.Rectangle" /> structure that is to the right of the equality operator.</param>
        <summary>Tests whether two <see cref="T:System.Drawing.Rectangle" /> structures have equal location and size.</summary>
        <returns>This operator returns <see langword="true" /> if the two <see cref="T:System.Drawing.Rectangle" /> structures have equal <see cref="P:System.Drawing.Rectangle.X" />, <see cref="P:System.Drawing.Rectangle.Y" />, <see cref="P:System.Drawing.Rectangle.Width" />, and <see cref="P:System.Drawing.Rectangle.Height" /> properties.</returns>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="op_Inequality">
      <MemberSignature Language="C#" Value="public static bool operator != (System.Drawing.Rectangle left, System.Drawing.Rectangle right);" />
      <MemberSignature Language="ILAsm" Value=".method public static hidebysig specialname bool op_Inequality(valuetype System.Drawing.Rectangle left, valuetype System.Drawing.Rectangle right) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.op_Inequality(System.Drawing.Rectangle,System.Drawing.Rectangle)" />
      <MemberSignature Language="VB.NET" Value="Public Shared Operator != (left As Rectangle, right As Rectangle) As Boolean" />
      <MemberSignature Language="F#" Value="static member op_Inequality : System.Drawing.Rectangle * System.Drawing.Rectangle -&gt; bool" Usage="System.Drawing.Rectangle.op_Inequality (left, right)" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; static bool operator !=(System::Drawing::Rectangle left, System::Drawing::Rectangle right);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2">
          <AttributeName Language="C#">[System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="left" Type="System.Drawing.Rectangle" />
        <Parameter Name="right" Type="System.Drawing.Rectangle" />
      </Parameters>
      <Docs>
        <param name="left">The <see cref="T:System.Drawing.Rectangle" /> structure that is to the left of the inequality operator.</param>
        <param name="right">The <see cref="T:System.Drawing.Rectangle" /> structure that is to the right of the inequality operator.</param>
        <summary>Tests whether two <see cref="T:System.Drawing.Rectangle" /> structures differ in location or size.</summary>
        <returns>This operator returns <see langword="true" /> if any of the <see cref="P:System.Drawing.Rectangle.X" />, <see cref="P:System.Drawing.Rectangle.Y" />, <see cref="P:System.Drawing.Rectangle.Width" /> or <see cref="P:System.Drawing.Rectangle.Height" /> properties of the two <see cref="T:System.Drawing.Rectangle" /> structures are unequal; otherwise <see langword="false" />.</returns>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="Right">
      <MemberSignature Language="C#" Value="public int Right { get; }" />
      <MemberSignature Language="ILAsm" Value=".property instance int32 Right" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.Right" />
      <MemberSignature Language="VB.NET" Value="Public ReadOnly Property Right As Integer" />
      <MemberSignature Language="F#" Value="member this.Right : int" Usage="System.Drawing.Rectangle.Right" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property int Right { int get(); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.ComponentModel.Browsable(false)]</AttributeName>
          <AttributeName Language="F#">[&lt;System.ComponentModel.Browsable(false)&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Int32</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets the x-coordinate that is the sum of <see cref="P:System.Drawing.Rectangle.X" /> and <see cref="P:System.Drawing.Rectangle.Width" /> property values of this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <value>The x-coordinate that is the sum of <see cref="P:System.Drawing.Rectangle.X" /> and <see cref="P:System.Drawing.Rectangle.Width" /> of this <see cref="T:System.Drawing.Rectangle" />.</value>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 The value of the <xref:System.Drawing.Rectangle.Right> property represents the x-coordinate of the first point at the right edge of the rectangle that is not contained in the rectangle.

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Round">
      <MemberSignature Language="C#" Value="public static System.Drawing.Rectangle Round (System.Drawing.RectangleF value);" />
      <MemberSignature Language="ILAsm" Value=".method public static hidebysig valuetype System.Drawing.Rectangle Round(valuetype System.Drawing.RectangleF value) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Round(System.Drawing.RectangleF)" />
      <MemberSignature Language="VB.NET" Value="Public Shared Function Round (value As RectangleF) As Rectangle" />
      <MemberSignature Language="F#" Value="static member Round : System.Drawing.RectangleF -&gt; System.Drawing.Rectangle" Usage="System.Drawing.Rectangle.Round value" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; static System::Drawing::Rectangle Round(System::Drawing::RectangleF value);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Drawing.Rectangle</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="value" Type="System.Drawing.RectangleF" />
      </Parameters>
      <Docs>
        <param name="value">The <see cref="T:System.Drawing.RectangleF" /> to be converted.</param>
        <summary>Converts the specified <see cref="T:System.Drawing.RectangleF" /> to a <see cref="T:System.Drawing.Rectangle" /> by rounding the <see cref="T:System.Drawing.RectangleF" /> values to the nearest integer values.</summary>
        <returns>The rounded integer value of the <see cref="T:System.Drawing.Rectangle" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Examples
 The following code example demonstrates how to use the <xref:System.Drawing.Rectangle.Round*> and <xref:System.Drawing.Rectangle.Truncate*> methods. This example is designed for use with a Windows Form.  Paste this code into a form and call the `RoundingAndTruncatingRectangles` method when handling the form's <xref:System.Windows.Forms.Control.Paint> event, passing `e` as <xref:System.Windows.Forms.PaintEventArgs>.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet5":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet5":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet5":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Size">
      <MemberSignature Language="C#" Value="public System.Drawing.Size Size { get; set; }" />
      <MemberSignature Language="ILAsm" Value=".property instance valuetype System.Drawing.Size Size" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.Size" />
      <MemberSignature Language="VB.NET" Value="Public Property Size As Size" />
      <MemberSignature Language="F#" Value="member this.Size : System.Drawing.Size with get, set" Usage="System.Drawing.Rectangle.Size" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property System::Drawing::Size Size { System::Drawing::Size get(); void set(System::Drawing::Size value); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.ComponentModel.Browsable(false)]</AttributeName>
          <AttributeName Language="F#">[&lt;System.ComponentModel.Browsable(false)&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2">
          <AttributeName Language="C#">[set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Drawing.Size</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets or sets the size of this <see cref="T:System.Drawing.Rectangle" />.</summary>
        <value>A <see cref="T:System.Drawing.Size" /> that represents the width and height of this <see cref="T:System.Drawing.Rectangle" /> structure.</value>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="Top">
      <MemberSignature Language="C#" Value="public int Top { get; }" />
      <MemberSignature Language="ILAsm" Value=".property instance int32 Top" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.Top" />
      <MemberSignature Language="VB.NET" Value="Public ReadOnly Property Top As Integer" />
      <MemberSignature Language="F#" Value="member this.Top : int" Usage="System.Drawing.Rectangle.Top" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property int Top { int get(); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.1;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.ComponentModel.Browsable(false)]</AttributeName>
          <AttributeName Language="F#">[&lt;System.ComponentModel.Browsable(false)&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Int32</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets the y-coordinate of the top edge of this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <value>The y-coordinate of the top edge of this <see cref="T:System.Drawing.Rectangle" /> structure.</value>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="ToString">
      <MemberSignature Language="C#" Value="public override readonly string ToString ();" FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig virtual instance string ToString() cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.ToString" />
      <MemberSignature Language="VB.NET" Value="Public Overrides Function ToString () As String" />
      <MemberSignature Language="F#" Value="override this.ToString : unit -&gt; string" Usage="rectangle.ToString " />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; override System::String ^ ToString();" />
      <MemberSignature Language="C#" Value="public override string ToString ();" FrameworkAlternate="netcore-1.0;netcore-1.1;netcore-2.0;netcore-2.1;netcore-2.2;netcore-3.0;netcore-3.1;netframework-1.1;netframework-2.0;netframework-3.0;netframework-3.5;netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1;netstandard-2.0;netstandard-2.1" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.String</ReturnType>
      </ReturnValue>
      <Parameters />
      <Docs>
        <summary>Converts the attributes of this <see cref="T:System.Drawing.Rectangle" /> to a human-readable string.</summary>
        <returns>A string that contains the position, width, and height of this <see cref="T:System.Drawing.Rectangle" /> structure ¾ for example, {X=20, Y=20, Width=100, Height=50}.</returns>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="Truncate">
      <MemberSignature Language="C#" Value="public static System.Drawing.Rectangle Truncate (System.Drawing.RectangleF value);" />
      <MemberSignature Language="ILAsm" Value=".method public static hidebysig valuetype System.Drawing.Rectangle Truncate(valuetype System.Drawing.RectangleF value) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Truncate(System.Drawing.RectangleF)" />
      <MemberSignature Language="VB.NET" Value="Public Shared Function Truncate (value As RectangleF) As Rectangle" />
      <MemberSignature Language="F#" Value="static member Truncate : System.Drawing.RectangleF -&gt; System.Drawing.Rectangle" Usage="System.Drawing.Rectangle.Truncate value" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; static System::Drawing::Rectangle Truncate(System::Drawing::RectangleF value);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Drawing.Rectangle</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="value" Type="System.Drawing.RectangleF" />
      </Parameters>
      <Docs>
        <param name="value">The <see cref="T:System.Drawing.RectangleF" /> to be converted.</param>
        <summary>Converts the specified <see cref="T:System.Drawing.RectangleF" /> to a <see cref="T:System.Drawing.Rectangle" /> by truncating the <see cref="T:System.Drawing.RectangleF" /> values.</summary>
        <returns>The truncated value of the  <see cref="T:System.Drawing.Rectangle" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Examples
 The following code example demonstrates how to use the <xref:System.Drawing.Rectangle.Round*> and <xref:System.Drawing.Rectangle.Truncate*> methods. This example is designed for use with a Windows Form. Paste this code into a form and call the `RoundingAndTruncatingRectangles` method when handling the form's <xref:System.Windows.Forms.Control.Paint> event, passing `e` as <xref:System.Windows.Forms.PaintEventArgs>.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet5":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet5":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet5":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Union">
      <MemberSignature Language="C#" Value="public static System.Drawing.Rectangle Union (System.Drawing.Rectangle a, System.Drawing.Rectangle b);" />
      <MemberSignature Language="ILAsm" Value=".method public static hidebysig valuetype System.Drawing.Rectangle Union(valuetype System.Drawing.Rectangle a, valuetype System.Drawing.Rectangle b) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.Drawing.Rectangle.Union(System.Drawing.Rectangle,System.Drawing.Rectangle)" />
      <MemberSignature Language="VB.NET" Value="Public Shared Function Union (a As Rectangle, b As Rectangle) As Rectangle" />
      <MemberSignature Language="F#" Value="static member Union : System.Drawing.Rectangle * System.Drawing.Rectangle -&gt; System.Drawing.Rectangle" Usage="System.Drawing.Rectangle.Union (a, b)" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; static System::Drawing::Rectangle Union(System::Drawing::Rectangle a, System::Drawing::Rectangle b);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Drawing.Rectangle</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="a" Type="System.Drawing.Rectangle" />
        <Parameter Name="b" Type="System.Drawing.Rectangle" />
      </Parameters>
      <Docs>
        <param name="a">A rectangle to union.</param>
        <param name="b">A rectangle to union.</param>
        <summary>Gets a <see cref="T:System.Drawing.Rectangle" /> structure that contains the union of two <see cref="T:System.Drawing.Rectangle" /> structures.</summary>
        <returns>A <see cref="T:System.Drawing.Rectangle" /> structure that bounds the union of the two <see cref="T:System.Drawing.Rectangle" /> structures.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 When one of the two rectangles is empty, meaning all of its values are zero, the <xref:System.Drawing.Rectangle.Union*> method returns a rectangle with a starting point of (0, 0), and the height and width of the non-empty rectangle. For example, if you have two rectangles: A = (0, 0; 0, 0) and B = (1, 1; 2, 2), then the union of A and B is (0, 0; 2, 2).



## Examples
 The following code example demonstrates how to use the <xref:System.Drawing.Rectangle.Union*> method. This example is designed for use with a Windows Form. Paste this code into a form and call the `ShowRectangleUnion` method when handling the form's <xref:System.Windows.Forms.Control.Paint> event, passing `e` as <xref:System.Windows.Forms.PaintEventArgs>.

 :::code language="cpp" source="~/snippets/cpp/VS_Snippets_Winforms/System.Drawing.RectanglesAndPoints/CPP/form1.cpp" id="Snippet4":::
 :::code language="csharp" source="~/snippets/csharp/System.Drawing/Brushes/Overview/form1.cs" id="Snippet4":::
 :::code language="vb" source="~/snippets/visualbasic/System.Drawing/Brushes/Overview/form1.vb" id="Snippet4":::

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Width">
      <MemberSignature Language="C#" Value="public int Width { get; set; }" />
      <MemberSignature Language="ILAsm" Value=".property instance int32 Width" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.Width" />
      <MemberSignature Language="VB.NET" Value="Public Property Width As Integer" />
      <MemberSignature Language="F#" Value="member this.Width : int with get, set" Usage="System.Drawing.Rectangle.Width" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property int Width { int get(); void set(int value); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Int32</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets or sets the width of this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <value>The width of this <see cref="T:System.Drawing.Rectangle" /> structure. The default is 0.</value>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 Changing the <xref:System.Drawing.Rectangle.Width> property will also cause a change in the <xref:System.Drawing.Rectangle.Right> property of the <xref:System.Drawing.Rectangle>. The units the rectangle is drawn in is determined by the <xref:System.Drawing.Graphics.PageUnit*> and <xref:System.Drawing.Graphics.PageScale*> properties of the graphics object used for drawing. The default unit is pixels.

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="X">
      <MemberSignature Language="C#" Value="public int X { get; set; }" />
      <MemberSignature Language="ILAsm" Value=".property instance int32 X" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.X" />
      <MemberSignature Language="VB.NET" Value="Public Property X As Integer" />
      <MemberSignature Language="F#" Value="member this.X : int with get, set" Usage="System.Drawing.Rectangle.X" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property int X { int get(); void set(int value); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Int32</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets or sets the x-coordinate of the upper-left corner of this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <value>The x-coordinate of the upper-left corner of this <see cref="T:System.Drawing.Rectangle" /> structure. The default is 0.</value>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 Changing the <xref:System.Drawing.Rectangle.X> property will also cause a change in the <xref:System.Drawing.Rectangle.Right> property of the <xref:System.Drawing.Rectangle>.

 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="Y">
      <MemberSignature Language="C#" Value="public int Y { get; set; }" />
      <MemberSignature Language="ILAsm" Value=".property instance int32 Y" />
      <MemberSignature Language="DocId" Value="P:System.Drawing.Rectangle.Y" />
      <MemberSignature Language="VB.NET" Value="Public Property Y As Integer" />
      <MemberSignature Language="F#" Value="member this.Y : int with get, set" Usage="System.Drawing.Rectangle.Y" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property int Y { int get(); void set(int value); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Primitives</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.1.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.0.0</AssemblyVersion>
        <AssemblyVersion>4.2.1.0</AssemblyVersion>
        <AssemblyVersion>5.0.0.0</AssemblyVersion>
        <AssemblyVersion>6.0.0.0</AssemblyVersion>
        <AssemblyVersion>7.0.0.0</AssemblyVersion>
        <AssemblyVersion>8.0.0.0</AssemblyVersion>
        <AssemblyVersion>9.0.0.0</AssemblyVersion>
        <AssemblyVersion>10.0.0.0</AssemblyVersion>
        <AssemblyVersion>11.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing</AssemblyName>
        <AssemblyVersion>1.0.5000.0</AssemblyVersion>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>netstandard</AssemblyName>
        <AssemblyVersion>2.0.0.0</AssemblyVersion>
        <AssemblyVersion>2.1.0.0</AssemblyVersion>
      </AssemblyInfo>
      <AssemblyInfo>
        <AssemblyName>System.Drawing.Common</AssemblyName>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="net-10.0;net-10.0-pp;net-11.0;net-11.0-pp;net-5.0;net-6.0;net-7.0;net-8.0;net-9.0;windowsdesktop-10.0;windowsdesktop-11.0;windowsdesktop-8.0;windowsdesktop-9.0">
          <AttributeName Language="C#">[get: System.Runtime.CompilerServices.IsReadOnly]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.CompilerServices.IsReadOnly&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Int32</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets or sets the y-coordinate of the upper-left corner of this <see cref="T:System.Drawing.Rectangle" /> structure.</summary>
        <value>The y-coordinate of the upper-left corner of this <see cref="T:System.Drawing.Rectangle" /> structure. The default is 0.</value>
        <remarks>
          <format type="text/markdown"><![CDATA[

## Remarks
 Changing the <xref:System.Drawing.Rectangle.Y> property will also cause a change in the <xref:System.Drawing.Rectangle.Bottom> property of the <xref:System.Drawing.Rectangle>.

 ]]></format>
        </remarks>
      </Docs>
    </Member>
  </Members>
</Type>