diff --git a/CHANGELOG.md b/CHANGELOG.md
index ca4363f158..62928f31c6 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -34,6 +34,9 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - Added integration tests for `Test-SqlDscIsRole` command to ensure it functions
   correctly in real environments
   [issue #2229](https://github.com/dsccommunity/SqlServerDsc/issues/2229).
+- Added integration tests for `Add-SqlDscTraceFlag` command to ensure it functions
+  correctly in real environments
+  [issue #2214](https://github.com/dsccommunity/SqlServerDsc/issues/2214).
 
 ### Fixed
 
diff --git a/azure-pipelines.yml b/azure-pipelines.yml
index d886501130..803bf3e77d 100644
--- a/azure-pipelines.yml
+++ b/azure-pipelines.yml
@@ -332,6 +332,7 @@ stages:
                   'tests/Integration/Commands/Assert-SqlDscAgentOperator.Integration.Tests.ps1'
                   'tests/Integration/Commands/Enable-SqlDscAgentOperator.Integration.Tests.ps1'
                   'tests/Integration/Commands/Disable-SqlDscAgentOperator.Integration.Tests.ps1'
+                  'tests/Integration/Commands/Add-SqlDscTraceFlag.Integration.Tests.ps1'
                   # Group 8
                   'tests/Integration/Commands/Remove-SqlDscAgentAlert.Integration.Tests.ps1'
                   'tests/Integration/Commands/Remove-SqlDscAgentOperator.Integration.Tests.ps1'
diff --git a/tests/Integration/Commands/Add-SqlDscTraceFlag.Integration.Tests.ps1 b/tests/Integration/Commands/Add-SqlDscTraceFlag.Integration.Tests.ps1
new file mode 100644
index 0000000000..c7e6f8a6d5
--- /dev/null
+++ b/tests/Integration/Commands/Add-SqlDscTraceFlag.Integration.Tests.ps1
@@ -0,0 +1,174 @@
+[System.Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseDeclaredVarsMoreThanAssignments', '', Justification = 'Suppressing this rule because Script Analyzer does not understand Pester syntax.')]
+param ()
+
+BeforeDiscovery {
+    try
+    {
+        if (-not (Get-Module -Name 'DscResource.Test'))
+        {
+            # Assumes dependencies have been resolved, so if this module is not available, run 'noop' task.
+            if (-not (Get-Module -Name 'DscResource.Test' -ListAvailable))
+            {
+                # Redirect all streams to $null, except the error stream (stream 2)
+                & "$PSScriptRoot/../../../build.ps1" -Tasks 'noop' 3>&1 4>&1 5>&1 6>&1 > $null
+            }
+
+            # If the dependencies have not been resolved, this will throw an error.
+            Import-Module -Name 'DscResource.Test' -Force -ErrorAction 'Stop'
+        }
+    }
+    catch [System.IO.FileNotFoundException]
+    {
+        throw 'DscResource.Test module dependency not found. Please run ".\build.ps1 -ResolveDependency -Tasks noop" first.'
+    }
+}
+
+BeforeAll {
+    $script:moduleName = 'SqlServerDsc'
+
+    Import-Module -Name $script:moduleName -Force -ErrorAction 'Stop'
+}
+
+Describe 'Add-SqlDscTraceFlag' -Tag @('Integration_SQL2017', 'Integration_SQL2019', 'Integration_SQL2022') {
+    BeforeAll {
+        $script:mockInstanceName = 'DSCSQLTEST'
+        $script:mockComputerName = Get-ComputerName
+
+        # Test trace flags to use for testing
+        $script:testTraceFlags = @(4199, 3226)
+        $script:singleTestTraceFlag = 1118
+        $script:additionalTestTraceFlag = 2544
+    }
+
+    Context 'When adding trace flags using ServerName and InstanceName parameters' {
+        BeforeAll {
+            # Clean up any existing test trace flags before starting tests
+            $currentTraceFlags = Get-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -ErrorAction 'Stop'
+            $testFlagsToRemove = $currentTraceFlags | Where-Object { $_ -in (@($script:testTraceFlags) + $script:singleTestTraceFlag + $script:additionalTestTraceFlag) }
+            if ($testFlagsToRemove)
+            {
+                Remove-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -TraceFlag $testFlagsToRemove -Force -ErrorAction 'SilentlyContinue'
+            }
+        }
+
+        AfterAll {
+            # Clean up test trace flags after tests
+            $currentTraceFlags = Get-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -ErrorAction 'Stop'
+            $testFlagsToRemove = $currentTraceFlags | Where-Object { $_ -in (@($script:testTraceFlags) + $script:singleTestTraceFlag + $script:additionalTestTraceFlag) }
+            if ($testFlagsToRemove)
+            {
+                Remove-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -TraceFlag $testFlagsToRemove -Force -ErrorAction 'SilentlyContinue'
+            }
+        }
+
+        It 'Should add a single trace flag without error' {
+            # Act - Add the trace flag
+            {
+                Add-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -TraceFlag $script:singleTestTraceFlag -Force -ErrorAction 'Stop'
+            } | Should -Not -Throw
+
+            # Assert - Verify the trace flag was added
+            $currentTraceFlags = Get-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -ErrorAction 'Stop'
+            $currentTraceFlags | Should -Contain $script:singleTestTraceFlag
+        }
+
+        It 'Should add multiple trace flags without error' {
+            # Act - Add the trace flags
+            {
+                Add-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -TraceFlag $script:testTraceFlags -Force -ErrorAction 'Stop'
+            } | Should -Not -Throw
+
+            # Assert - Verify the trace flags were added
+            $currentTraceFlags = Get-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -ErrorAction 'Stop'
+            foreach ($traceFlag in $script:testTraceFlags)
+            {
+                $currentTraceFlags | Should -Contain $traceFlag
+            }
+        }
+
+        It 'Should not duplicate existing trace flags when adding them again' {
+            # Arrange - Ensure a trace flag is already set
+            Add-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -TraceFlag $script:singleTestTraceFlag -Force -ErrorAction 'Stop'
+            
+            $beforeAddTraceFlags = Get-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -ErrorAction 'Stop'
+            $beforeCount = ($beforeAddTraceFlags | Where-Object { $_ -eq $script:singleTestTraceFlag }).Count
+
+            # Act - Try to add the same trace flag again
+            {
+                Add-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -TraceFlag $script:singleTestTraceFlag -Force -ErrorAction 'Stop'
+            } | Should -Not -Throw
+
+            # Assert - Verify no duplicate was created
+            $afterAddTraceFlags = Get-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -ErrorAction 'Stop'
+            $afterCount = ($afterAddTraceFlags | Where-Object { $_ -eq $script:singleTestTraceFlag }).Count
+            
+            $afterCount | Should -Be $beforeCount
+            $afterAddTraceFlags | Should -Contain $script:singleTestTraceFlag
+        }
+
+        It 'Should preserve existing trace flags when adding new ones' {
+            # Arrange - Add an initial trace flag
+            Add-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -TraceFlag $script:singleTestTraceFlag -Force -ErrorAction 'Stop'
+
+            # Act - Add additional trace flags
+            {
+                Add-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -TraceFlag $script:additionalTestTraceFlag -Force -ErrorAction 'Stop'
+            } | Should -Not -Throw
+
+            # Assert - Verify both old and new trace flags exist
+            $currentTraceFlags = Get-SqlDscTraceFlag -ServerName $script:mockComputerName -InstanceName $script:mockInstanceName -ErrorAction 'Stop'
+            $currentTraceFlags | Should -Contain $script:singleTestTraceFlag
+            $currentTraceFlags | Should -Contain $script:additionalTestTraceFlag
+        }
+    }
+
+    Context 'When adding trace flags using ServiceObject parameter' {
+        BeforeAll {
+            # Get the service object for the test instance
+            $script:serviceObject = Get-SqlDscManagedComputerService -ServiceType 'DatabaseEngine' -InstanceName $script:mockInstanceName -ErrorAction 'Stop'
+
+            # Clean up any existing test trace flags before starting tests
+            $currentTraceFlags = Get-SqlDscTraceFlag -ServiceObject $script:serviceObject -ErrorAction 'Stop'
+            $testFlagsToRemove = $currentTraceFlags | Where-Object { $_ -in (@($script:testTraceFlags) + $script:singleTestTraceFlag + $script:additionalTestTraceFlag) }
+            if ($testFlagsToRemove)
+            {
+                Remove-SqlDscTraceFlag -ServiceObject $script:serviceObject -TraceFlag $testFlagsToRemove -Force -ErrorAction 'SilentlyContinue'
+            }
+        }
+
+        AfterAll {
+            # Clean up test trace flags after tests
+            $currentTraceFlags = Get-SqlDscTraceFlag -ServiceObject $script:serviceObject -ErrorAction 'Stop'
+            $testFlagsToRemove = $currentTraceFlags | Where-Object { $_ -in (@($script:testTraceFlags) + $script:singleTestTraceFlag + $script:additionalTestTraceFlag) }
+            if ($testFlagsToRemove)
+            {
+                Remove-SqlDscTraceFlag -ServiceObject $script:serviceObject -TraceFlag $testFlagsToRemove -Force -ErrorAction 'SilentlyContinue'
+            }
+        }
+
+        It 'Should add a single trace flag using ServiceObject parameter' {
+            # Act - Add the trace flag
+            {
+                Add-SqlDscTraceFlag -ServiceObject $script:serviceObject -TraceFlag $script:singleTestTraceFlag -Force -ErrorAction 'Stop'
+            } | Should -Not -Throw
+
+            # Assert - Verify the trace flag was added
+            $currentTraceFlags = Get-SqlDscTraceFlag -ServiceObject $script:serviceObject -ErrorAction 'Stop'
+            $currentTraceFlags | Should -Contain $script:singleTestTraceFlag
+        }
+
+        It 'Should add multiple trace flags using ServiceObject parameter' {
+            # Act - Add the trace flags
+            {
+                Add-SqlDscTraceFlag -ServiceObject $script:serviceObject -TraceFlag $script:testTraceFlags -Force -ErrorAction 'Stop'
+            } | Should -Not -Throw
+
+            # Assert - Verify the trace flags were added
+            $currentTraceFlags = Get-SqlDscTraceFlag -ServiceObject $script:serviceObject -ErrorAction 'Stop'
+            foreach ($traceFlag in $script:testTraceFlags)
+            {
+                $currentTraceFlags | Should -Contain $traceFlag
+            }
+        }
+    }
+}
diff --git a/tests/Integration/Commands/README.md b/tests/Integration/Commands/README.md
index 6b7ba03806..2e3c6a5f06 100644
--- a/tests/Integration/Commands/README.md
+++ b/tests/Integration/Commands/README.md
@@ -84,6 +84,7 @@ Test-SqlDscIsAgentOperator | 2 | 1 (Install-SqlDscServer), 0 (Prerequisites) | D
 Assert-SqlDscAgentOperator | 2 | 1 (Install-SqlDscServer), 0 (Prerequisites) | DSCSQLTEST | -
 Enable-SqlDscAgentOperator | 2 | 1 (Install-SqlDscServer), 0 (Prerequisites) | DSCSQLTEST | -
 Disable-SqlDscAgentOperator | 2 | 1 (Install-SqlDscServer), 0 (Prerequisites) | DSCSQLTEST | -
+Add-SqlDscTraceFlag | 2 | 1 (Install-SqlDscServer), 0 (Prerequisites) | DSCSQLTEST | -
 Remove-SqlDscAgentAlert | 8 | 2 (New-SqlDscAgentAlert) | DSCSQLTEST | -
 Remove-SqlDscAgentOperator | 8 | 2 (New-SqlDscAgentOperator) | DSCSQLTEST | -
 Remove-SqlDscAudit | 8 | - | DSCSQLTEST | -