Removed qtpy-gamer target, it's been several years and has never been released. The target is also broken anyway.

Author: ducalex

components/retro-go/README.md

@@ -15,7 +15,6 @@ Retro-Go's shared library (or framework) provides an easy way to port emulators
 | [mrgc-gbm](targets/mrgc-gbm/docs/README.md)                   |  |
 | [nullnano](targets/nullnano/docs/README.md)                   |  |
 | [odroid-go](targets/odroid-go/docs/README.md)                 | Official |
-| [qtpy-gamer](targets/qtpy-gamer/docs/README.md)               | Broken |
 | [rachel-esp32](targets/rachel-esp32/docs/README.md)           |   |
 | [retro-esp32](targets/retro-esp32/docs/README.md)             |   |
 | [retro-ruler](targets/retro-ruler-V1/docs/README.md)          |   |

components/retro-go/config.h

@@ -2,8 +2,6 @@
 #include "targets/odroid-go/config.h"
 #elif defined(RG_TARGET_MRGC_G32)
 #include "targets/mrgc-g32/config.h"
-#elif defined(RG_TARGET_QTPY_GAMER)
-#include "targets/qtpy-gamer/config.h"
 #elif defined(RG_TARGET_RETRO_ESP32)
 #include "targets/retro-esp32/config.h"
 #elif defined(RG_TARGET_RETRO_RULER_V1)
@@ -16,8 +14,6 @@
 #include "targets/esplay-micro/config.h"
 #elif defined(RG_TARGET_ESPLAY_S3)
 #include "targets/esplay-s3/config.h"
-#elif defined(RG_TARGET_ESP32S3_DEVKIT_C)
-#include "targets/esp32s3-devkit-c/config.h"
 #elif defined(RG_TARGET_FRI3D_2024)
 #include "targets/fri3d-2024/config.h"
 #elif defined(RG_TARGET_BYTEBOI_REV1)

components/retro-go/drivers/audio/i2s.c

@@ -186,9 +186,6 @@ static bool driver_set_mute(bool mute)
         #else
             gpio_set_level(RG_GPIO_SND_AMP_ENABLE, mute ? 0 : 1);
         #endif
-    #elif defined(RG_TARGET_QTPY_GAMER)
-        rg_i2c_gpio_set_direction(AW_HEADPHONE_EN, 0);
-        rg_i2c_gpio_set_level(AW_HEADPHONE_EN, !mute);
     #endif
     state.muted = mute;
     return true;

components/retro-go/drivers/display/ili9341.h

@@ -156,9 +156,6 @@ static void lcd_set_backlight(float percent)
 
 #if defined(RG_GPIO_LCD_BCKL)
     error_code = ledc_set_fade_time_and_start(LEDC_LOW_SPEED_MODE, LEDC_CHANNEL_0, 0x1FFF * level, 50, 0);
-#elif defined(RG_TARGET_QTPY_GAMER)
-    rg_i2c_gpio_set_direction(AW_TFT_BACKLIGHT, RG_GPIO_ANALOG_OUTPUT);
-    rg_i2c_gpio_set_level(AW_TFT_BACKLIGHT, level * 255);
 #endif
 
     if (error_code)
@@ -234,12 +231,6 @@ static void lcd_init(void)
     rg_usleep(100 * 1000);
     gpio_set_level(RG_GPIO_LCD_RST, 1);
     rg_usleep(10 * 1000);
-#elif defined(RG_TARGET_QTPY_GAMER)
-    rg_i2c_gpio_set_direction(AW_TFT_RESET, RG_GPIO_OUTPUT);
-    rg_i2c_gpio_set_level(AW_TFT_RESET, 0);
-    rg_usleep(100 * 1000);
-    rg_i2c_gpio_set_level(AW_TFT_RESET, 1);
-    rg_usleep(10 * 1000);
 #endif
 
     ILI9341_CMD(0x01);          // Reset