Skip to content

Potential out of bound read in _nx_ipv4_option_process()

Moderate
mrybczyn published GHSA-vwh7-h99r-fvwq Oct 17, 2025

Package

NetX Duo (Eclipse ThreadX)

Affected versions

<= 6.4.3

Patched versions

6.4.4

Description

The _nx_ipv4_option_process() function is called to process IPv4 options. It loops over the options, making sure it can read at least 1 byte in each iterations (type). When processing NX_IP_OPTION_INTERNET_TIMESTAMP options, it reads 3 more bytes. However, there is no bounds check to make sure those 3 bytes are within bounds, hence the option processing could read out of bounds by 3 bytes.

code:

threadx\netxduo-master\common\src\nx_ipv4_option_process.c

UINT  _nx_ipv4_option_process(NX_IP *ip_ptr, NX_PACKET *packet_ptr)

{

 

NX_IPV4_HEADER *ip_header_ptr;

UCHAR          *option_ptr;

ULONG           ip_option_length;

...

UINT            index = 0;

...

    ip_header_ptr = (NX_IPV4_HEADER *)(packet_ptr -> nx_packet_prepend_ptr);

    option_ptr = packet_ptr -> nx_packet_prepend_ptr + sizeof(NX_IPV4_HEADER);

...

    ip_option_length = ((((ip_header_ptr -> nx_ip_header_word_0 & NX_IP_LENGTH_MASK) >> 24) - NX_IP_NORMAL_LENGTH) & 0xFF) * (ULONG)sizeof(ULONG);

...

    while (index < ip_option_length)

    {

 

        /* Get the option type.  */

        op_type = *option_ptr;  //

 

        /* Process the option type. */

        switch (op_type)

        {

...

        case NX_IP_OPTION_NO_OPERATION:  // <-- fill options with NOP till 1 byte from the end of the buffer.

        {

...

            option_ptr++;

            index++;

            continue;

        }

        case NX_IP_OPTION_INTERNET_TIMESTAMP:

        {

...

            op_length = *(option_ptr + 1);  // <-- this could read out of bounds, there should a length check prior to performing this read.

...

            op_timestamp_offset = *(option_ptr + 2); // <-- this could read out of bounds

...

            op_timestamp_overflow = (*(option_ptr + 3)) >> 4; // <-- this could read out of bounds

            op_timestamp_flags = (*(option_ptr + 3)) & 0xF; // <-- this could read out of bounds

...

            break;

        }

        default:

            break;

        }

...

    }

...

}

Severity

Moderate

CVSS overall score

This score calculates overall vulnerability severity from 0 to 10 and is based on the Common Vulnerability Scoring System (CVSS).
/ 10

CVSS v4 base metrics

Exploitability Metrics
Attack Vector Network
Attack Complexity Low
Attack Requirements None
Privileges Required None
User interaction None
Vulnerable System Impact Metrics
Confidentiality Low
Integrity None
Availability None
Subsequent System Impact Metrics
Confidentiality None
Integrity None
Availability None

CVSS v4 base metrics

Exploitability Metrics
Attack Vector: This metric reflects the context by which vulnerability exploitation is possible. This metric value (and consequently the resulting severity) will be larger the more remote (logically, and physically) an attacker can be in order to exploit the vulnerable system. The assumption is that the number of potential attackers for a vulnerability that could be exploited from across a network is larger than the number of potential attackers that could exploit a vulnerability requiring physical access to a device, and therefore warrants a greater severity.
Attack Complexity: This metric captures measurable actions that must be taken by the attacker to actively evade or circumvent existing built-in security-enhancing conditions in order to obtain a working exploit. These are conditions whose primary purpose is to increase security and/or increase exploit engineering complexity. A vulnerability exploitable without a target-specific variable has a lower complexity than a vulnerability that would require non-trivial customization. This metric is meant to capture security mechanisms utilized by the vulnerable system.
Attack Requirements: This metric captures the prerequisite deployment and execution conditions or variables of the vulnerable system that enable the attack. These differ from security-enhancing techniques/technologies (ref Attack Complexity) as the primary purpose of these conditions is not to explicitly mitigate attacks, but rather, emerge naturally as a consequence of the deployment and execution of the vulnerable system.
Privileges Required: This metric describes the level of privileges an attacker must possess prior to successfully exploiting the vulnerability. The method by which the attacker obtains privileged credentials prior to the attack (e.g., free trial accounts), is outside the scope of this metric. Generally, self-service provisioned accounts do not constitute a privilege requirement if the attacker can grant themselves privileges as part of the attack.
User interaction: This metric captures the requirement for a human user, other than the attacker, to participate in the successful compromise of the vulnerable system. This metric determines whether the vulnerability can be exploited solely at the will of the attacker, or whether a separate user (or user-initiated process) must participate in some manner.
Vulnerable System Impact Metrics
Confidentiality: This metric measures the impact to the confidentiality of the information managed by the VULNERABLE SYSTEM due to a successfully exploited vulnerability. Confidentiality refers to limiting information access and disclosure to only authorized users, as well as preventing access by, or disclosure to, unauthorized ones.
Integrity: This metric measures the impact to integrity of a successfully exploited vulnerability. Integrity refers to the trustworthiness and veracity of information. Integrity of the VULNERABLE SYSTEM is impacted when an attacker makes unauthorized modification of system data. Integrity is also impacted when a system user can repudiate critical actions taken in the context of the system (e.g. due to insufficient logging).
Availability: This metric measures the impact to the availability of the VULNERABLE SYSTEM resulting from a successfully exploited vulnerability. While the Confidentiality and Integrity impact metrics apply to the loss of confidentiality or integrity of data (e.g., information, files) used by the system, this metric refers to the loss of availability of the impacted system itself, such as a networked service (e.g., web, database, email). Since availability refers to the accessibility of information resources, attacks that consume network bandwidth, processor cycles, or disk space all impact the availability of a system.
Subsequent System Impact Metrics
Confidentiality: This metric measures the impact to the confidentiality of the information managed by the SUBSEQUENT SYSTEM due to a successfully exploited vulnerability. Confidentiality refers to limiting information access and disclosure to only authorized users, as well as preventing access by, or disclosure to, unauthorized ones.
Integrity: This metric measures the impact to integrity of a successfully exploited vulnerability. Integrity refers to the trustworthiness and veracity of information. Integrity of the SUBSEQUENT SYSTEM is impacted when an attacker makes unauthorized modification of system data. Integrity is also impacted when a system user can repudiate critical actions taken in the context of the system (e.g. due to insufficient logging).
Availability: This metric measures the impact to the availability of the SUBSEQUENT SYSTEM resulting from a successfully exploited vulnerability. While the Confidentiality and Integrity impact metrics apply to the loss of confidentiality or integrity of data (e.g., information, files) used by the system, this metric refers to the loss of availability of the impacted system itself, such as a networked service (e.g., web, database, email). Since availability refers to the accessibility of information resources, attacks that consume network bandwidth, processor cycles, or disk space all impact the availability of a system.
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:N/VA:N/SC:N/SI:N/SA:N

CVE ID

CVE-2025-55092

Weaknesses

Out-of-bounds Read

The product reads data past the end, or before the beginning, of the intended buffer. Learn more on MITRE.

Buffer Over-read

The product reads from a buffer using buffer access mechanisms such as indexes or pointers that reference memory locations after the targeted buffer. Learn more on MITRE.

Credits