AM spectrum

[pietss]

Release v0.20
I ask if it's a problem or I didn't understand exactly how it works. Aviation band reception. Spectrum width, settable with keys 1 and 7; receiving frequency of approximately 120.00 mhz: if set to 8.33k the transmission is not detected and is not audible, if set to 10.00k it is detected and it is audible, if set to 12.50k it is not detected and is not audible. I couldn't continue with the rehearsals because the broadcast had ended.
I don't know about previous versions, it was an accident that I noticed this now.

[pietss]

This morning I checked more calmly, the problem I had reported is not real but this confusion was caused by the following fact.
By varying the width of the spectrum with keys 1 and 7, going down from 100 to 25 there is no problem but they start when you set to lower values (12.50, 10, 8.33, 6.25....), this is because the position of the squelch line remains unchanged but the signal bars become smaller in height, therefore it is necessary to use the F key to lower the squelch line.
Maybe this little problem can be resolved later?