Encounter a problem using Modbus

[Baokangwen]

Dear @MarkRivers

##Load record instances
dbLoadRecords("/home/guest/EPICS/synApps/support/modbus-R2-11/db/18ubraker.db")
Can't set "18U:TABLE:DETH-DI0:DI.DTYP" to "asynUInt32Digital"
Error at or before ")" in file "/home/guest/EPICS/synAppa/support/modbus-R2-11/db/18ubraker.db"

ErrordbLoadRecords: faild to load /home/guest/EPICS/synAppa/support/modbus-R2-11/db/18ubraker.db

[MarkRivers]

The error is in this file, “18ubraker.db”.

That file is not part of this repository. Did you create that file? If so, please post it, since it seems to have a syntax error.

[Baokangwen]

Dear @MarkRivers
The content below is from 18ubraker.db

############ NO.1 DI ##################
record(bi, "18U:TABLE:DETH-DI0:DI")
{
field(DTYP,"asynUInt32Digital")
field(INP,"@asynMask(No1-DI 0 0x1 2.0)")
field(ZNAM,"0")
field(ONAM,"1")
field(SCAN,"I/O Intr")
}

record(bi, "18U:TABLE:DETV1-DI1:DI")
{
field(DTYP,"asynUInt32Digital")
field(INP,"@asynMask(No1-DI 1 0x1 2.0)")
field(ZNAM,"0")
field(ONAM,"1")
field(SCAN,"I/O Intr")
}

record(bi, "18U:TABLE:DETV2-DI2:DI")
{
field(DTYP,"asynUInt32Digital")
field(INP,"@asynMask(No1-DI 2 0x1 2.0)")
field(ZNAM,"0")
field(ONAM,"1")
field(SCAN,"I/O Intr")
}

record(bi, "18U:TABLE:M2-DI3:DI")
{
field(DTYP,"asynUInt32Digital")
field(INP,"@asynMask(No1-DI 3 0x1 2.0)")
field(ZNAM,"0")
field(ONAM,"1")
field(SCAN,"I/O Intr")
}

record(bi, "18U:TABLE:M2-DI4:DI")
{
field(DTYP,"asynUInt32Digital")
field(INP,"@asynMask(No1-DI 4 0x1 2.0)")
field(ZNAM,"0")
field(ONAM,"1")
field(SCAN,"I/O Intr")
}

############ NO.2 DO ##################

record(bo, "18U:TABLE:DETH-DO0:DO")
{
field(DTYP,"asynUInt32Digital")
field(OUT,"@asynMask(No1-DO 0 0x1 2.0)")
field(ZNAM,"0")
field(ONAM,"1")
field(SCAN,"Passive")
}

record(bo, "18U:TABLE:DETV1-DO1:DO")
{
field(DTYP,"asynUInt32Digital")
field(OUT,"@asynMask(No1-DO 1 0x1 2.0)")
field(ZNAM,"0")
field(ONAM,"1")
field(SCAN,"Passive")
}

record(bo, "18U:TABLE:DETV2-DO2:DO")
{
field(DTYP,"asynUInt32Digital")
field(OUT,"@asynMask(No1-DO 2 0x1 2.0)")
field(ZNAM,"0")
field(ONAM,"1")
field(SCAN,"Passive")
}

record(bo, "18U:TABLE:M2-DO3:DO")
{
field(DTYP,"asynUInt32Digital")
field(OUT,"@asynMask(No1-DO 3 0x1 2.0)")
field(ZNAM,"0")
field(ONAM,"1")
field(SCAN,"Passive")
}

record(bo, "18U:TABLE:M2-DO4:DO")
{
field(DTYP,"asynUInt32Digital")
field(OUT,"@asynMask(No1-DO 4 0x1 2.0)")
field(ZNAM,"0")
field(ONAM,"1")
field(SCAN,"Passive")
}

[MarkRivers]

Can't set "18U:TABLE:DETH-DI0:DI.DTYP" to "asynUInt32Digital"

Your db file looks OK. I think the problem must be that your IOC application does not correctly include the asyn dbd file, so it does not know about the asynUInt32Digital device support.

[Baokangwen]

Thank you mark.

[MarkRivers]

Is it working now?

[Baokangwen]

I am still trying, there may be some other issues, thank you mark.