WPS doesn't work with v3.3.0

[ahappel99]

Board

ESP32-C3

Device Description

ESP32-C3 Supermini

Hardware Configuration

Router: AVM Fritz.Box

Version

v3.2.1

Type

Bug

IDE Name

Arduino IDE

Operating System

Windows 10

Flash frequency

80 MHz

PSRAM enabled

no

Upload speed

921600

Description

Even with the example script i can't create a connection via WPS.
WPS ends with success, but no SSID is transmitted an no connection ist possible.
With v3.2.1 it works.

Sketch

/*
Example Code To Get ESP32 To Connect To A Router Using WPS
===========================================================
This example code provides both Push Button method and Pin
based WPS entry to get your ESP connected to your WiFi router.

Hardware Requirements
========================
ESP32 and a Router having WPS functionality

This code is under Public Domain License.

Author:
Pranav Cherukupalli <cherukupallip@gmail.com>
*/

#include "sdkconfig.h"
#if CONFIG_ESP_WIFI_REMOTE_ENABLED
#error "WPS is only supported in SoCs with native Wi-Fi support"
#endif

#include "WiFi.h"
#include "esp_wps.h"
/*
Change the definition of the WPS mode
from WPS_TYPE_PBC to WPS_TYPE_PIN in
the case that you are using pin type
WPS (pin is 00000000)
*/
#define ESP_WPS_MODE WPS_TYPE_PBC

void wpsStart() {
  esp_wps_config_t config;
  memset(&config, 0, sizeof(esp_wps_config_t));
  //Same as config = WPS_CONFIG_INIT_DEFAULT(ESP_WPS_MODE);
  config.wps_type = ESP_WPS_MODE;
  strcpy(config.factory_info.manufacturer, "ESPRESSIF");
  strcpy(config.factory_info.model_number, CONFIG_IDF_TARGET);
  strcpy(config.factory_info.model_name, "ESPRESSIF IOT");
  strcpy(config.factory_info.device_name, "ESP DEVICE");
  strcpy(config.pin, "00000000");
  esp_err_t err = esp_wifi_wps_enable(&config);
  if (err != ESP_OK) {
    Serial.printf("WPS Enable Failed: 0x%x: %s\n", err, esp_err_to_name(err));
    return;
  }

  err = esp_wifi_wps_start(0);
  if (err != ESP_OK) {
    Serial.printf("WPS Start Failed: 0x%x: %s\n", err, esp_err_to_name(err));
  }
}

void wpsStop() {
  esp_err_t err = esp_wifi_wps_disable();
  if (err != ESP_OK) {
    Serial.printf("WPS Disable Failed: 0x%x: %s\n", err, esp_err_to_name(err));
  }
}

String wpspin2string(uint8_t a[]) {
  char wps_pin[9];
  for (int i = 0; i < 8; i++) {
    wps_pin[i] = a[i];
  }
  wps_pin[8] = '\0';
  return (String)wps_pin;
}

// WARNING: WiFiEvent is called from a separate FreeRTOS task (thread)!
void WiFiEvent(WiFiEvent_t event, arduino_event_info_t info) {
  switch (event) {
    case ARDUINO_EVENT_WIFI_STA_START: Serial.println("Station Mode Started"); break;
    case ARDUINO_EVENT_WIFI_STA_GOT_IP:
      Serial.println("Connected to :" + String(WiFi.SSID()));
      Serial.print("Got IP: ");
      Serial.println(WiFi.localIP());
      break;
    case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
      Serial.println("Disconnected from station, attempting reconnection");
      WiFi.reconnect();
      break;
    case ARDUINO_EVENT_WPS_ER_SUCCESS:
      Serial.println("WPS Successful, stopping WPS and connecting to: " + String(WiFi.SSID()));
      wpsStop();
      delay(10);
      WiFi.begin();
      break;
    case ARDUINO_EVENT_WPS_ER_FAILED:
      Serial.println("WPS Failed, retrying");
      wpsStop();
      wpsStart();
      break;
    case ARDUINO_EVENT_WPS_ER_TIMEOUT:
      Serial.println("WPS Timedout, retrying");
      wpsStop();
      wpsStart();
      break;
    case ARDUINO_EVENT_WPS_ER_PIN: Serial.println("WPS_PIN = " + wpspin2string(info.wps_er_pin.pin_code)); break;
    default:                       break;
  }
}

void setup() {
  Serial.begin(115200);
  delay(10);
  Serial.println();
  WiFi.onEvent(WiFiEvent);  // Will call WiFiEvent() from another thread.
  WiFi.mode(WIFI_MODE_STA);
  Serial.println("Starting WPS");
  wpsStart();
}

void loop() {
  //nothing to do here
}

Debug Message

--

Other Steps to Reproduce

Switching back to 3.2.1 makes it work.

I have checked existing issues, online documentation and the Troubleshooting Guide

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.