docs(gpio): fix wrong psram support information

PSRAM is NOT supported on esp32c3, but IS supported on esp32c5 and
esp32c61

Author: suda-morris

docs/en/api-reference/peripherals/gpio/esp32c3.inc

@@ -112,7 +112,7 @@ The table below provides more information on pin usage, and please note the comm
 .. note::
 
     - Strapping pin: GPIO2, GPIO8 and GPIO9 are strapping pins. For more information, please refer to `ESP32-C3 Datasheet <{IDF_TARGET_DATASHEET_EN_URL}>`_.
-    - SPI0/1: GPIO12 ~ GPIO17 are usually used for SPI flash and PSRAM and are not recommended for other uses.
+    - SPI0/1: GPIO12 ~ GPIO17 are usually used for SPI flash and are not recommended for other uses.
     - USB-JTAG: GPIO18 and GPIO19 are used by USB-JTAG by default. If they are reconfigured to operate as normal GPIOs, USB-JTAG functionality will be disabled.
     - RTC: GPIO0 ~ GPIO5 can be used to wake up the chip from Deep-sleep mode. Other GPIOs can only wake up the chip from Light-sleep mode. For more information, please refer to Section :ref:`Wakeup Sources<api-reference-wakeup-source>`.
 

docs/en/api-reference/peripherals/gpio/esp32c5.inc

@@ -170,7 +170,7 @@ The table below provides more information on pin usage, and please note the comm
 .. note::
 
     - Strapping pin: GPIO2, GPIO7, GPIO27, and GPIO28 are strapping pins. For more information, please refer to `datasheet <{IDF_TARGET_DATASHEET_EN_URL}>`__.
-	  - SPI0/1: GPIO16 ~ GPIO22 are usually used for SPI flash and not recommended for other uses.
+	  - SPI0/1: GPIO16 ~ GPIO22 are usually used for SPI flash and PSRAM, they're not recommended for other uses.
 	  - USB-JTAG: GPIO13 and GPIO14 are used by USB-JTAG by default. If they are reconfigured to operate as normal GPIOs, USB-JTAG functionality will be disabled.
 
 ---

docs/en/api-reference/peripherals/gpio/esp32c61.inc

@@ -150,7 +150,7 @@ The table below provides more information on pin usage, and please note the comm
 .. note::
 
   - Some pins are used as strapping pins, which can be used to select in which boot mode to load the chip, etc.. The details can be found in `datasheet <{IDF_TARGET_DATASHEET_EN_URL}>`_ > ``Strapping Pins``.
-	- SPI0/1: GPIO14 ~ GPIO17 and GPIO19 ~ GPIO21 are usually used for SPI flash and not recommended for other uses.
+	- SPI0/1: GPIO14 ~ GPIO17 and GPIO19 ~ GPIO21 are usually used for SPI flash and PSRAM, they're not recommended for other uses.
 	- USB-JTAG: GPIO12 and GPIO13 are used by USB-JTAG by default. If they are reconfigured to operate as normal GPIOs, USB-JTAG functionality will be disabled.
 
 ---

docs/zh_CN/api-reference/peripherals/gpio/esp32c3.inc

@@ -112,7 +112,7 @@
 .. note::
 
     - Strapping 管脚：GPIO2、GPIO8、和 GPIO9 是 Strapping 管脚。更多信息请参考 `ESP32-C3 技术规格书 <{IDF_TARGET_DATASHEET_CN_URL}>`_。
-    - SPI0/1：GPIO12 ~ GPIO17 通常用于 SPI flash 和 PSRAM，不推荐用于其他用途。
+    - SPI0/1：GPIO12 ~ GPIO17 通常用于 SPI flash，不推荐用于其他用途。
     - USB-JTAG：GPIO18 和 GPIO19 默认用于 USB-JTAG。如果将它们配置为普通 GPIO，驱动程序将禁用 USB-JTAG 功能。
     - RTC：GPIO0 ~ GPIO5 可用于将芯片从 Deep-sleep 模式中唤醒，其他 GPIO 仅能将芯片从 Light-sleep 模式中唤醒。更多信息请参考 :ref:`唤醒源<api-reference-wakeup-source>` 章节。
 

docs/zh_CN/api-reference/peripherals/gpio/esp32c5.inc

@@ -170,7 +170,7 @@
 .. note::
 
     - Strapping 管脚：GPIO2、GPIO7、GPIO27 和 GPIO28 是 Strapping 管脚。更多信息请参考 `ESP32-C5 技术规格书 <{IDF_TARGET_DATASHEET_CN_URL}>`_。
-    - SPI0/1：GPIO16 ~ GPIO22 通常用于 SPI flash，不推荐用于其他用途。
+    - SPI0/1：GPIO16 ~ GPIO22 通常用于 SPI flash 和 PSRAM，不推荐用于其他用途。
     - USB-JTAG：GPIO13 和 GPIO14 默认用于 USB-JTAG。如果将它们配置为普通 GPIO，驱动程序将禁用 USB-JTAG 功能。
 
 ---

docs/zh_CN/api-reference/peripherals/gpio/esp32c61.inc

@@ -150,7 +150,7 @@
 .. note::
 
     - 其中一些管脚被用作 Strapping 管脚，可用于选择加载芯片的启动模式等。详细信息请见 `ESP32-C61 技术规格书 <{IDF_TARGET_DATASHEET_CN_URL}>`_ > ``Strapping 管脚``。
-    - SPI0/1：GPIO14 ~ GPIO17 和 GPIO19 ~ GPIO21 通常用于 SPI flash，不推荐用于其他用途。
+    - SPI0/1：GPIO14 ~ GPIO17 和 GPIO19 ~ GPIO21 通常用于 SPI flash 和 PSRAM，不推荐用于其他用途。
     - USB-JTAG：GPIO12 和 GPIO13 默认用于 USB-JTAG。如果将它们配置为普通 GPIO，驱动程序将禁用 USB-JTAG 功能。
 
 ---