fix(esp_hw_support): fix empty item of system clock retention table for esp32c5

Author: esp-lis

components/esp_hw_support/lowpower/port/esp32c5/sleep_clock.c

@@ -32,14 +32,14 @@ esp_err_t sleep_clock_system_retention_init(void *arg)
         [4] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(4),    I2C_ANA_MST_ANA_CONF0_REG,  0,                              I2C_MST_BBPLL_STOP_FORCE_LOW,   1, 0), .owner = ENTRY(0) },
         [5] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(5),    I2C_ANA_MST_ANA_CONF0_REG,  I2C_MST_BBPLL_STOP_FORCE_HIGH,  I2C_MST_BBPLL_STOP_FORCE_HIGH,  1, 0), .owner = ENTRY(0) },
         /* Clock configuration retention */
-        [6] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(6),    PMU_CLK_STATE0_REG,         PMU_STABLE_XPD_BBPLL_STATE,     PMU_STABLE_XPD_BBPLL_STATE_M,   1, 0),  .owner = ENTRY(0)},             /* Wait PMU_WAIT_XTL_STABLE done */
-        [7] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(7),    PCR_AHB_FREQ_CONF_REG,      0,                              PCR_AHB_DIV_NUM,                1, 0),  .owner = ENTRY(0) | ENTRY(1) }, /* Set AHB bus frequency to XTAL frequency */
-        [8] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(8),    PCR_BUS_CLK_UPDATE_REG,     1,                              PCR_BUS_CLOCK_UPDATE,           1, 0),  .owner = ENTRY(0) | ENTRY(1) },
+        [6] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(6),    PMU_CLK_STATE0_REG,         PMU_STABLE_XPD_BBPLL_STATE,     PMU_STABLE_XPD_BBPLL_STATE_M,   1, 0), .owner = ENTRY(0) },            /* Wait PMU_WAIT_XTL_STABLE done */
+        [7] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(7),    PCR_AHB_FREQ_CONF_REG,      0,                              PCR_AHB_DIV_NUM,                1, 0), .owner = ENTRY(0) | ENTRY(1) }, /* Set AHB bus frequency to XTAL frequency */
+        [8] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(8),    PCR_BUS_CLK_UPDATE_REG,     1,                              PCR_BUS_CLOCK_UPDATE,           1, 0), .owner = ENTRY(0) | ENTRY(1) },
+        [9] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(10), LP_ANA_POWER_GLITCH_CNTL_REG, 0,                              LP_ANA_PWR_GLITCH_RESET_ENA_M,  0, 1), .owner = ENTRY(0) | ENTRY(1) }, /* Disable power glitch detector on sleep backup */
+        [10] = {.config = REGDMA_LINK_WRITE_INIT(REGDMA_PCR_LINK(11), LP_ANA_POWER_GLITCH_CNTL_REG, 0xF,                            LP_ANA_PWR_GLITCH_RESET_ENA_M,  1, 0), .owner = ENTRY(0) | ENTRY(1) }, /* Enable power glitch detector on wakeup restore */
 #if CONFIG_PM_POWER_DOWN_PERIPHERAL_IN_LIGHT_SLEEP
-        [9] = { .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_PCR_LINK(9), DR_REG_PCR_BASE,            DR_REG_PCR_BASE,    75, 0, 0,   0xffffffff, 0xffffffff, 0x200007f7, 0x0), .owner = ENTRY(0) | ENTRY(1) },
+        [11] = { .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_PCR_LINK(9), DR_REG_PCR_BASE,        DR_REG_PCR_BASE,    75, 0, 0,   0xffffffff, 0xffffffff, 0x200007f7, 0x0), .owner = ENTRY(0) | ENTRY(1) },
 #endif
-        [10] = {.config = REGDMA_LINK_WRITE_INIT   (REGDMA_PCR_LINK(10), LP_ANA_POWER_GLITCH_CNTL_REG,      0,                      LP_ANA_PWR_GLITCH_RESET_ENA_M,  0, 1),  .owner = ENTRY(0) | ENTRY(1)}, /* Disable power glitch detector on sleep backup */
-        [11] = {.config = REGDMA_LINK_WRITE_INIT   (REGDMA_PCR_LINK(11), LP_ANA_POWER_GLITCH_CNTL_REG,      0xF,                    LP_ANA_PWR_GLITCH_RESET_ENA_M,  1, 0),  .owner = ENTRY(0) | ENTRY(1)}, /* Enable power glitch detector on wakeup restore */
     };
     esp_err_t err = sleep_retention_entries_create(pcr_regs_retention, ARRAY_SIZE(pcr_regs_retention), REGDMA_LINK_PRI_SYS_CLK, SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);
     ESP_RETURN_ON_ERROR(err, TAG, "failed to allocate memory for system (PCR) retention");