Merge branch 'bugfix/fixed_possible_i2s_failure_on_p4' into 'master'

ci(i2s): fixed occationally failure on P4

Closes IDFCI-3185, IDFCI-3186, IDFCI-3191, IDFCI-3192, IDFCI-3193, IDFCI-3194, IDFCI-3195, IDFCI-3196, IDFCI-3197, IDFCI-3198, IDFCI-3199, IDFCI-3200, IDFCI-3201, IDFCI-3202, IDFCI-3203, IDFCI-3204, IDFCI-3205, IDFCI-3206, IDFCI-3207, and IDFCI-3208

See merge request espressif/esp-idf!42229

Author: L-KAYA

components/esp_driver_i2s/i2s_common.c

@@ -563,6 +563,11 @@ uint32_t i2s_get_source_clk_freq(i2s_clock_src_t clk_src, uint32_t mclk_freq_hz)
     if (clk_src == I2S_CLK_SRC_APLL) {
         return i2s_set_get_apll_freq(mclk_freq_hz);
     }
+#endif
+#ifdef I2S_LL_DEFAULT_CLK_SRC
+    if (clk_src == I2S_CLK_SRC_DEFAULT) {
+        clk_src = I2S_LL_DEFAULT_CLK_SRC;
+    }
 #endif
     esp_clk_tree_src_get_freq_hz(clk_src, ESP_CLK_TREE_SRC_FREQ_PRECISION_CACHED, &clk_freq);
     return clk_freq;

components/esp_driver_i2s/test_apps/i2s/main/test_i2s.c

@@ -741,7 +741,7 @@ TEST_CASE("I2S_loopback_test", "[i2s]")
     TEST_ESP_OK(i2s_del_channel(rx_handle));
 }
 
-#if SOC_I2S_NUM > 1
+#if SOC_I2S_NUM > 1 && !CONFIG_ESP32P4_SELECTS_REV_LESS_V3
 TEST_CASE("I2S_master_write_slave_read_test", "[i2s]")
 {
     i2s_chan_handle_t tx_handle;
@@ -907,8 +907,8 @@ TEST_CASE("I2S_default_PLL_clock_test", "[i2s]")
     TEST_ESP_OK(i2s_new_channel(&chan_cfg, NULL, &rx_handle));
     TEST_ESP_OK(i2s_channel_init_std_mode(rx_handle, &std_cfg));
 
-#if CONFIG_IDF_TARGET_ESP32P4 && CONFIG_ESP_REV_MIN_FULL >= 300
-    std_cfg.clk_cfg.clk_src = I2S_CLK_SRC_PLL_160M;
+#ifdef I2S_LL_DEFAULT_CLK_SRC
+    std_cfg.clk_cfg.clk_src = I2S_LL_DEFAULT_CLK_SRC;
 #endif
     i2s_test_common_sample_rate(rx_handle, &std_cfg.clk_cfg);
 #if SOC_I2S_SUPPORTS_XTAL

components/hal/esp32p4/include/hal/i2s_ll.h

@@ -42,7 +42,14 @@ extern "C" {
 #define I2S_LL_SLOT_FRAME_BIT_MAX      512 // Up-to 512 bits in one frame, determined by MAX(half_sample_bits) * 2
 
 #define I2S_LL_XTAL_CLK_FREQ           (40 * 1000000)   // XTAL_CLK: 40MHz
-#define I2S_LL_DEFAULT_CLK_FREQ        I2S_LL_XTAL_CLK_FREQ  // No PLL clock source on P4, use XTAL as default
+#if HAL_CONFIG(CHIP_SUPPORT_MIN_REV) >= 300
+#define I2S_LL_DEFAULT_CLK_FREQ        (160 * 1000000)  // PLL_F160M_CLK: 160MHz
+#define I2S_LL_DEFAULT_CLK_SRC         I2S_CLK_SRC_PLL_160M
+#else
+#define I2S_LL_DEFAULT_CLK_FREQ        I2S_LL_XTAL_CLK_FREQ  // No PLL clock source before version 3, use XTAL as default
+#define I2S_LL_DEFAULT_CLK_SRC         I2S_CLK_SRC_XTAL
+#endif
+
 
 #define I2S_LL_ETM_EVENT_TABLE(i2s_port, chan_dir, event)  \
     (uint32_t[SOC_I2S_NUM][2][I2S_ETM_EVENT_MAX]){  \
@@ -442,10 +449,14 @@ static inline uint32_t i2s_ll_get_clk_src(i2s_clock_src_t src)
             return 1;
         case I2S_CLK_SRC_EXTERNAL:
             return 2;
+        case I2S_CLK_SRC_DEFAULT:
 #if HAL_CONFIG(CHIP_SUPPORT_MIN_REV) >= 300
+            return 3;
         // Only support PLL_160M on P4 ver3 and later
         case I2S_CLK_SRC_PLL_160M:
             return 3;
+#else
+            return 0;
 #endif
         default:
             HAL_ASSERT(false && "unsupported clock source");

components/soc/esp32p4/include/soc/clk_tree_defs.h

@@ -350,7 +350,7 @@ typedef enum {
  * @brief I2S clock source enum
  */
 typedef enum {
-    I2S_CLK_SRC_DEFAULT = SOC_MOD_CLK_XTAL,             /*!< Select XTAL as the default source clock  */
+    I2S_CLK_SRC_DEFAULT = 0,                            /*!< Auto select maximum clock source asdefault source clock  */
     I2S_CLK_SRC_PLL_160M = SOC_MOD_CLK_PLL_F160M,       /*!< Select PLL_F160M as the source clock (only supported on P4 hw_ver3) */
     I2S_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,                /*!< Select XTAL as the source clock */
     I2S_CLK_SRC_APLL = SOC_MOD_CLK_APLL,                /*!< Select APLL as the source clock */