Merge branch 'feat/add_efuse_cpu_freq_rating' into 'master'

efuse/add cpu freq rating

See merge request idf/esp-idf!1994

Author: projectgus

components/bootloader/subproject/main/bootloader_start.c

@@ -447,6 +447,14 @@ void bootloader_main()
 {
     vddsdio_configure();
     flash_gpio_configure();
+#if (CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ == 240)
+    //Check if ESP32 is rated for a CPU frequency of 160MHz only
+    if (REG_GET_BIT(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_CPU_FREQ_RATED) &&
+        REG_GET_BIT(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_CPU_FREQ_LOW)) {
+        ESP_LOGE(TAG, "Chip CPU frequency rated for 160MHz. Modify CPU frequency in menuconfig");
+        return;
+    }
+#endif
     bootloader_clock_configure();
     uart_console_configure();
     wdt_reset_check();

components/bootloader/subproject/main/flash_qio_mode.c

@@ -174,13 +174,15 @@ static esp_err_t enable_qio_mode(read_status_fn_t read_status_fn,
         // spiconfig specifies a custom efuse pin configuration. This config defines all pins -except- WP,
         // which is compiled into the bootloader instead.
         //
-        // Most commonly an overriden pin mapping means ESP32-D2WD. Warn if chip is ESP32-D2WD
-        // but someone has changed the WP pin assignment from that chip's WP pin.
-        uint32_t chip_ver = REG_GET_FIELD(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_VER_RESERVE);
-        uint32_t pkg_ver = chip_ver & 0x7;
-        const int PKG_VER_ESP32_D2WD = 2; // TODO: use chip detection API once available
-        if (pkg_ver == PKG_VER_ESP32_D2WD && CONFIG_BOOTLOADER_SPI_WP_PIN != ESP32_D2WD_WP_GPIO) {
-            ESP_LOGW(TAG, "Chip is ESP32-D2WD but flash WP pin is different value to internal flash");
+        // Most commonly an overriden pin mapping means ESP32-D2WD or ESP32-PICOD4.
+        //Warn if chip is ESP32-D2WD/ESP32-PICOD4 but someone has changed the WP pin
+        //assignment from that chip's WP pin.
+        uint32_t pkg_ver = REG_GET_FIELD(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_VER_PKG);
+        if (CONFIG_BOOTLOADER_SPI_WP_PIN != ESP32_D2WD_WP_GPIO  &&
+            (pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32D2WDQ5 ||
+             pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD2 ||
+             pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD4)) {
+            ESP_LOGW(TAG, "Chip is ESP32-D2WD/ESP32-PICOD4 but flash WP pin is different value to internal flash");
         }
     }
 

components/soc/esp32/include/soc/efuse_reg.h

@@ -91,15 +91,21 @@
 #define EFUSE_RD_BLK3_PART_RESERVE_M  ((EFUSE_RD_BLK3_PART_RESERVE_V)<<(EFUSE_RD_BLK3_PART_RESERVE_S))
 #define EFUSE_RD_BLK3_PART_RESERVE_V  0x1
 #define EFUSE_RD_BLK3_PART_RESERVE_S  14
-/* EFUSE_RD_CHIP_VER_RESERVE : R/W ;bitpos:[13:12] ;default: 2'b0 ; */
-/*description: */
-#define EFUSE_RD_CHIP_VER_RESERVE  0x00000003
-#define EFUSE_RD_CHIP_VER_RESERVE_M  ((EFUSE_RD_CHIP_VER_RESERVE_V)<<(EFUSE_RD_CHIP_VER_RESERVE_S))
-#define EFUSE_RD_CHIP_VER_RESERVE_V  0x3
-#define EFUSE_RD_CHIP_VER_RESERVE_S  12
-/* EFUSE_RD_CHIP_VER : R/W ;bitpos:[11:9] ;default: 3'b0 ; */
+/* EFUSE_RD_CHIP_CPU_FREQ_RATED : R/W ;bitpos:[13] ;default: 1'b0 ; */
+/*description: If set, the ESP32's maximum CPU frequency has been rated*/
+#define EFUSE_RD_CHIP_CPU_FREQ_RATED  (BIT(13))
+#define EFUSE_RD_CHIP_CPU_FREQ_RATED_M  ((EFUSE_RD_CHIP_CPU_FREQ_RATED_V)<<(EFUSE_RD_CHIP_CPU_FREQ_RATED_S))
+#define EFUSE_RD_CHIP_CPU_FREQ_RATED_V  0x1
+#define EFUSE_RD_CHIP_CPU_FREQ_RATED_S  13
+/* EFUSE_RD_CHIP_CPU_FREQ_LOW : R/W ;bitpos:[12] ;default: 1'b0 ; */
+/*description: If set alongside EFUSE_RD_CHIP_CPU_FREQ_RATED, the ESP32's max CPU frequency is rated for 160MHz. 240MHz otherwise*/
+#define EFUSE_RD_CHIP_CPU_FREQ_LOW  (BIT(12))
+#define EFUSE_RD_CHIP_CPU_FREQ_LOW_M  ((EFUSE_RD_CHIP_CPU_FREQ_LOW_V)<<(EFUSE_RD_CHIP_CPU_FREQ_LOW_S))
+#define EFUSE_RD_CHIP_CPU_FREQ_LOW_V  0x1
+#define EFUSE_RD_CHIP_CPU_FREQ_LOW_S  12
+/* EFUSE_RD_CHIP_VER_PKG : R/W ;bitpos:[11:9] ;default: 3'b0 ; */
 /*description: chip package */
-#define EFUSE_RD_CHIP_VER  0x00000007
+#define EFUSE_RD_CHIP_VER_PKG  0x00000007
 #define EFUSE_RD_CHIP_VER_PKG_M  ((EFUSE_RD_CHIP_VER_PKG_V)<<(EFUSE_RD_CHIP_VER_PKG_S))
 #define EFUSE_RD_CHIP_VER_PKG_V  0x7
 #define EFUSE_RD_CHIP_VER_PKG_S  9
@@ -341,18 +347,29 @@
 #define EFUSE_BLK3_PART_RESERVE_M  ((EFUSE_BLK3_PART_RESERVE_V)<<(EFUSE_BLK3_PART_RESERVE_S))
 #define EFUSE_BLK3_PART_RESERVE_V  0x1
 #define EFUSE_BLK3_PART_RESERVE_S  14
-/* EFUSE_CHIP_VER_RESERVE : R/W ;bitpos:[13:12] ;default: 2'b0 ; */
-/*description: */
-#define EFUSE_CHIP_VER_RESERVE  0x00000003
-#define EFUSE_CHIP_VER_RESERVE_M  ((EFUSE_CHIP_VER_RESERVE_V)<<(EFUSE_CHIP_VER_RESERVE_S))
-#define EFUSE_CHIP_VER_RESERVE_V  0x3
-#define EFUSE_CHIP_VER_RESERVE_S  12
-/* EFUSE_CHIP_VER : R/W ;bitpos:[11:9] ;default: 3'b0 ; */
+/* EFUSE_CHIP_CPU_FREQ_RATED : R/W ;bitpos:[13] ;default: 1'b0 ; */
+/*description: If set, the ESP32's maximum CPU frequency has been rated*/
+#define EFUSE_CHIP_CPU_FREQ_RATED  (BIT(13))
+#define EFUSE_CHIP_CPU_FREQ_RATED_M  ((EFUSE_CHIP_CPU_FREQ_RATED_V)<<(EFUSE_CHIP_CPU_FREQ_RATED_S))
+#define EFUSE_CHIP_CPU_FREQ_RATED_V  0x1
+#define EFUSE_CHIP_CPU_FREQ_RATED_S  13
+/* EFUSE_CHIP_CPU_FREQ_LOW : R/W ;bitpos:[12] ;default: 1'b0 ; */
+/*description: If set alongside EFUSE_CHIP_CPU_FREQ_RATED, the ESP32's max CPU frequency is rated for 160MHz. 240MHz otherwise*/
+#define EFUSE_CHIP_CPU_FREQ_LOW  (BIT(12))
+#define EFUSE_CHIP_CPU_FREQ_LOW_M  ((EFUSE_CHIP_CPU_FREQ_LOW_V)<<(EFUSE_CHIP_CPU_FREQ_LOW_S))
+#define EFUSE_CHIP_CPU_FREQ_LOW_V  0x1
+#define EFUSE_CHIP_CPU_FREQ_LOW_S  12
+/* EFUSE_CHIP_VER_PKG : R/W ;bitpos:[11:9] ;default: 3'b0 ; */
 /*description: */
 #define EFUSE_CHIP_VER_PKG  0x00000007
 #define EFUSE_CHIP_VER_PKG_M  ((EFUSE_CHIP_VER_PKG_V)<<(EFUSE_CHIP_VER_PKG_S))
 #define EFUSE_CHIP_VER_PKG_V  0x7
 #define EFUSE_CHIP_VER_PKG_S  9
+#define EFUSE_CHIP_VER_PKG_ESP32D0WDQ6  0
+#define EFUSE_CHIP_VER_PKG_ESP32D0WDQ5  1
+#define EFUSE_CHIP_VER_PKG_ESP32D2WDQ5  2
+#define EFUSE_CHIP_VER_PKG_ESP32PICOD2  4
+#define EFUSE_CHIP_VER_PKG_ESP32PICOD4  5
 /* EFUSE_SPI_PAD_CONFIG_HD : R/W ;bitpos:[8:4] ;default: 5'b0 ; */
 /*description: program for SPI_pad_config_hd*/
 #define EFUSE_SPI_PAD_CONFIG_HD  0x0000001F