Skip to content

Latest commit

 

History

History
280 lines (241 loc) · 8.18 KB

mqtt.md

File metadata and controls

280 lines (241 loc) · 8.18 KB

Openfang Mqtt configuration & Home Assistant Integration

Mqtt and some binary files posted in this project have been ported from Dafang Hack and this is the steps explaining how to do it.

Library requirements

we need some new links to current library until someone do not recompile the programs again.(in Openfang there are links like libm.so.1 but we need links terminated with 0)

ln -s /lib/libm-1.0.12.so /lib/libm.so.0 
ln -s /lib/libuClibc-1.0.12.so /lib/libc.so.0
ln -s /lib/libpthread-1.0.12.so /lib/libpthread.so.0
ln -s /lib/librt-1.0.12.so /lib/librt.so.0

Bin's ported

We ported the following files from Dafang in bin folder with 755 permisions:

bin/busybox


chmod 755 bin/*

mosquitto_sub, mosquitto_pub and getImages were already in Openfang.

MQTT config file

We ported this file from config/mqtt.conf.dist and we need to rename to config/mqtt.conf. Changing the paths and our configuration.

export LD_LIBRARY_PATH='/thirdlib:/system/lib:/system/sdcard/lib' for export LD_LIBRARY_PATH='/thirdlib:/lib:/opt/lib'

Variables: (USER,PASS, HOST, PORT, LOCATION, DEVICE)

Autostart files

We need to create mqtt-control and mqtt-status files as copy of other autostart files and give it 755 permisions:

/config/autostart/mqtt-control
/config/autostart/mqtt-status

chmod 755 config/autostart/mqtt-*

Controlscripts files

We need to port mqtt-control.sh and mqtt-status.sh files and give it 755 permisions:

/controlscripts/mqtt-control.sh
/controlscripts/mqtt-status.sh

chmod 755 config/autostart/mqtt-*

then we need to change all entries "/system/sdcard" for "/opt"

Scripts files

We need to port mqtt-control.sh, mqtt-status.sh and mqtt-status-interval.sh files and give it 755 permisions:

/scripts/mqtt-control.sh
/scripts/mqtt-status.sh
/scripts/mqtt-status-interval.sh

chmod 755 config/autostart/mqtt-*

then we need to change all entries "/system/sdcard" for "/opt" in mqtt-status-interval.sh we need to replace "/system/sdcard/bin/setconf" for "/usr/bin/setconf"

Common_functions.sh correction

in comon_functions.sh replace all "/system/sdcard" for "/opt"

	correct line 93 status=$(getgpioled $(nvram get 2860 yellow_pin)) for status=$(getgpioled $(nvram get 2860 yellow_led_pin))

Home Assistant

Autodiscovery creates some deveices that we don't have implemented and I disabled it. To create configuration add the following lines acording your configuration:

in configuration.yaml

camera:
  - platform: ffmpeg
   name: <openfang1> ffmpeg
   input: -rtsp_transport tcp -i rtsp://<your_ip>:8554/unicast
   
binary_sensor:
 - platform: mqtt
   name: "openfang1_motion_sensor"
   state_topic: "Home/openfang1/motion_sensor"

sensor:
 - platform: mqtt
   name: "openfang1"
   state_topic: "Home/openfang1"
   unit_of_measurement: "%"
   
 - platform: mqtt
   name: "openfang1_light_sensor"
   state_topic: "Home/openfang1/brightness"
   unit_of_measurement: "%"
 
 switch:
 - platform: mqtt
   name: "openfang1_blue_led"
   state_topic: "Home/openfang1/leds/blue"
   command_topic: "Home/openfang1/leds/blue/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false

 - platform: mqtt
   name: "openfang1_yellow_led"
   state_topic: "Home/openfang1/leds/yellow"
   command_topic: "Home/openfang1/leds/yellow/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false
   
 - platform: mqtt
   name: "openfang1_ir_led"
   state_topic: "Home/openfang1/leds/ir"
   command_topic: "Home/openfang1/leds/ir/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false
   
 - platform: mqtt
   name: "openfang1_ir_cut"
   state_topic: "Home/openfang1/ir_cut"
   command_topic: "Home/openfang1/ir_cut/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false
   
 - platform: mqtt
   name: "openfang1_night_mode"
   state_topic: "Home/openfang1/night_mode"
   command_topic: "Home/openfang1/night_mode/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false

 - platform: mqtt
   name: "openfang1_night_mode_auto"
   state_topic: "Home/openfang1/night_mode/auto"
   command_topic: "Home/openfang1/night_mode/auto/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false

 - platform: mqtt
   name: "openfang1_motion_detection"
   state_topic: "Home/openfang1/motion/detection"
   command_topic: "Home/openfang1/motion/detection/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false

 - platform: mqtt
   name: "openfang1_motion_tracking"
   state_topic: "Home/openfang1/motion/tracking"
   command_topic: "Home/openfang1/motion/tracking/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false
   
 - platform: mqtt
   name: "openfang1_remount_sdcard"
   state_topic: "Home/openfang1/remount_sdcard"
   command_topic: "Home/openfang1/remount_sdcard/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false  
   
 - platform: mqtt
   name: "openfang1_reboot"
   state_topic: "Home/openfang1/reboot"
   command_topic: "Home/openfang1/reboot/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false
   
 - platform: mqtt
   name: "openfang1_snapshot"
   state_topic: "Home/openfang1/snapshot"
   command_topic: "Home/openfang1/snapshot/set"
   payload_on: "ON"
   payload_off: "OFF"
   optimistic: false  
   
 - platform: mqtt
   name: "openfang1 RTSP"
   state_topic: "Home/openfang1/status"
   command_topic: "Home/openfang1/set"
   payload_on: "h264_noseg_start"
   payload_off: "rtsp_stop"
   optimistic: false

In customize:

homeassistant:
customize:
  sensor.openfang1:
    friendly_name: openfang1      
    icon: mdi-clipboard-text
  switch.openfang1_blue_led:
    friendly_name: openfang1 Blue LED      
    icon: mdi:led-on
  switch.openfang1_yellow_led:
    friendly_name: openfang1 Yellow LED      
    icon: mdi:led-on      
  switch.openfang1_ir_led:
    friendly_name: openfang1 Ir LED      
    icon: mdi:led-on
  switch.openfang1_ir_cut:
    friendly_name: openfang1 Ir CUT      
    icon: mdi:image-filter-black-white
  sensor.openfang1_light_sensor:
    friendly_name: openfang1 Light Sensor      
    icon: mdi:brightness-5
  switch.openfang1_night_mode:
    friendly_name: openfang1 Night Mode      
    icon: mdi:weather-night 
  switch.openfang1_night_mode_auto:
    friendly_name: openfang1 Auto-Night Mode      
    icon: mdi:weather-night  
  switch.openfang1_motion_detection:
    friendly_name: openfang1 Motion Detection      
    icon: mdi:run
  binary_sensor.openfang1_motion_sensor:
    friendly_name: openfang1 Motion Sensor
    icon: mdi:run
  switch.openfang1_remount_sdcard:
    friendly_name: openfang1 Remount SD-Card      
  switch.openfang1_reboot:
    friendly_name: openfang1 Reboot      
  switch.openfang1_snapshot:
    friendly_name: openfang1 Snapshot

In lovelace:

cards:
- type: picture-glance
  entities: []
  Title: openfang1
  camera_image: camera.openfang1_ffmpeg

- type: entities
  title: Switchs
  show_header_toggle: false
  entities:
  - switch.openfang1_blue_led
  - switch.openfang1_yellow_led 
  - switch.openfang1_ir_led
  - type: divider
  - switch.openfang1_ir_cut
  - type: divider 
  - sensor.openfang1_light_sensor
  - sensor.openfang1
  - type: divider
  - switch.openfang1_night_mode
  - switch.openfang1_night_mode_auto
  - type: divider
  - switch.openfang1_motion_detection
  - binary_sensor.openfang1_motion_sensor
  - type: divider    
  - switch.openfang1_rtsp 
  - switch.openfang1_h264_rtsp_server
  - switch.openfang1_mjpeg_rtsp_server
  - type: divider
  - switch.openfang1_motion_tracking
  - switch.openfang1_motion_send_mail
  - switch.openfang1_motion_send_telegram 
  - type: divider
  - switch.openfang1_remount_sdcard
  - switch.openfang1_reboot
  - switch.openfang1_snapshot
  - type: divider    
  - camera.openfang1_motion_snapshot

At the end we upladed some of this mqtt files at this github but take special attention in device name and your configuration.