Add FT8 support

Author: NT7S

README.md

@@ -1,6 +1,6 @@
-JT65/JT9/JT4/WSPR/FSQ Encoder Library for Arduino
-=============================================
-This library very simply generates a set of channel symbols for JT65, JT9, JT4, or WSPR based on the user providing a properly formatted Type 6 message for JT65, JT9, or JT4 (which is 13 valid characters) or a callsign, Maidenhead grid locator, and power output for WSPR. It will also generate an arbitrary FSQ message of up to 200 characters in both directed and non-directed format. When paired with a synthesizer that can output frequencies in fine, phase-continuous tuning steps (such as the Si5351), then a beacon or telemetry transmitter can be created which can change the transmitted characters as needed from the Arduino.
+JT65/JT9/JT4/FT8/WSPR/FSQ Encoder Library for Arduino
+=====================================================
+This library very simply generates a set of channel symbols for JT65, JT9, JT4, FT8, or WSPR based on the user providing a properly formatted Type 6 message for JT65, JT9, or JT4 (which is 13 valid characters), Type 0.0 or 0.5 message for FT8 (v2.0.0 protocol) or a callsign, Maidenhead grid locator, and power output for WSPR. It will also generate an arbitrary FSQ message of up to 200 characters in both directed and non-directed format. When paired with a synthesizer that can output frequencies in fine, phase-continuous tuning steps (such as the Si5351), then a beacon or telemetry transmitter can be created which can change the transmitted characters as needed from the Arduino.
 
 Please feel free to use the issues feature of GitHub if you run into problems or have suggestions for important features to implement.
 

library.properties

@@ -1,9 +1,9 @@
 name=Etherkit JTEncode
-version=1.1.3
+version=1.2.0
 author=Jason Milldrum <[email protected]>
 maintainer=Jason Milldrum <[email protected]>
-sentence=Generate JT65, JT9, JT4, WSPR, and FSQ symbols on your Arduino.
-paragraph=This library very simply generates a set of channel symbols for JT65, JT9, JT4, or WSPR based on the user providing a properly formatted Type 6 message for JT65, JT9, or JT4 (which is 13 valid characters) or a callsign, Maidenhead grid locator, and power output for WSPR. It will also generate an arbitrary FSQ message of up to 200 characters in both directed and non-directed format. When paired with a synthesizer that can output frequencies in fine, phase-continuous tuning steps (such as the Si5351), then a beacon or telemetry transmitter can be created which can change the transmitted characters as needed from the Arduino.
+sentence=Generate JT65, JT9, JT4, FT8, WSPR, and FSQ symbols on your Arduino.
+paragraph=This library very simply generates a set of channel symbols for JT65, JT9, JT4, FT8, or WSPR based on the user providing a properly formatted Type 6 message for JT65, JT9, or JT4 (which is 13 valid characters), Type 0.0 or 0.5 message for FT8 (v2.0.0 protocol) or a callsign, Maidenhead grid locator, and power output for WSPR. It will also generate an arbitrary FSQ message of up to 200 characters in both directed and non-directed format. When paired with a synthesizer that can output frequencies in fine, phase-continuous tuning steps (such as the Si5351), then a beacon or telemetry transmitter can be created which can change the transmitted characters as needed from the Arduino.
 category=Data Processing
 url=https://github.com/etherkit/JTEncode
 architectures=*