Cannot install on machine.

[Blueguy0301]

Hi, I've been trying to fix this overnight. But I can't find the way to fix it. Before everything. here is everything about the system I'm running:
Python version : 3.11.3
Any other libraries I'm using : I use pyenv-win and only that.

My error was this :

$ python -m pip install --use-pep517 chatterbot
Collecting chatterbot
  Using cached ChatterBot-1.0.5-py2.py3-none-any.whl (67 kB)
Collecting mathparse<0.2,>=0.1
  Using cached mathparse-0.1.2-py3-none-any.whl (7.2 kB)
Collecting nltk<4.0,>=3.2
  Using cached nltk-3.8.1-py3-none-any.whl (1.5 MB)
Collecting pint>=0.8.1
  Using cached Pint-0.20.1-py3-none-any.whl (269 kB)
Collecting pymongo<4.0,>=3.3
  Using cached pymongo-3.13.0-cp311-cp311-win_amd64.whl (394 kB)
Collecting python-dateutil<2.8,>=2.7
  Using cached python_dateutil-2.7.5-py2.py3-none-any.whl (225 kB)
Collecting pyyaml<5.2,>=5.1
  Using cached PyYAML-5.1.2.tar.gz (265 kB)
  Installing build dependencies ... done
  Getting requirements to build wheel ... done
  Preparing metadata (pyproject.toml) ... done
Collecting spacy<2.2,>=2.1
  Using cached spacy-2.1.9.tar.gz (30.7 MB)
  Installing build dependencies ... error
  error: subprocess-exited-with-error

  × pip subprocess to install build dependencies did not run successfully.
  │ exit code: 1
  ╰─> [87 lines of output]
      Collecting setuptools
        Using cached setuptools-67.6.1-py3-none-any.whl (1.1 MB)
      Collecting wheel<0.33.0,>0.32.0
        Using cached wheel-0.32.3-py2.py3-none-any.whl (21 kB)
      Collecting Cython
        Using cached Cython-0.29.34-py2.py3-none-any.whl (988 kB)
      Collecting cymem<2.1.0,>=2.0.2
        Using cached cymem-2.0.7-cp311-cp311-win_amd64.whl (28 kB)
      Collecting preshed<2.1.0,>=2.0.1
        Using cached preshed-2.0.1.tar.gz (113 kB)
        Preparing metadata (setup.py): started
        Preparing metadata (setup.py): finished with status 'done'
      Collecting murmurhash<1.1.0,>=0.28.0
        Using cached murmurhash-1.0.9-cp311-cp311-win_amd64.whl (18 kB)
      Collecting thinc<7.1.0,>=7.0.8
        Using cached thinc-7.0.8.tar.gz (1.9 MB)
        Preparing metadata (setup.py): started
        Preparing metadata (setup.py): finished with status 'done'
      Collecting blis<0.3.0,>=0.2.1
        Using cached blis-0.2.4.tar.gz (1.5 MB)
        Preparing metadata (setup.py): started
        Preparing metadata (setup.py): finished with status 'done'
      Collecting wasabi<1.1.0,>=0.0.9
        Using cached wasabi-0.10.1-py3-none-any.whl (26 kB)
      Collecting srsly<1.1.0,>=0.0.6
        Using cached srsly-1.0.6-cp311-cp311-win_amd64.whl (194 kB)
      Collecting numpy>=1.7.0
        Using cached numpy-1.24.2-cp311-cp311-win_amd64.whl (14.8 MB)
      Collecting plac<1.0.0,>=0.9.6
        Using cached plac-0.9.6-py2.py3-none-any.whl (20 kB)
      Collecting tqdm<5.0.0,>=4.10.0
        Using cached tqdm-4.65.0-py3-none-any.whl (77 kB)
      Collecting colorama
        Using cached colorama-0.4.6-py2.py3-none-any.whl (25 kB)
      Installing collected packages: wasabi, plac, cymem, wheel, srsly, setuptools, preshed, numpy, murmurhash, Cython, colorama, tqdm, blis, thinc
        DEPRECATION: preshed is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
        Running setup.py install for preshed: started
        Running setup.py install for preshed: finished with status 'error'
        error: subprocess-exited-with-error
     
        Running setup.py install for preshed did not run successfully.
        exit code: 1
     
        [32 lines of output]
        C:\Users\Administrator\.pyenv\pyenv-win\versions\3.11.3\Lib\site-packages\setuptools\installer.py:27: SetuptoolsDeprecationWarning: setuptools.installer is deprecated. Requirements should be satisfied by a PEP 517 installer.
          warnings.warn(
        WARNING: The wheel package is not available.
        running install
        C:\Users\Administrator\.pyenv\pyenv-win\versions\3.11.3\Lib\site-packages\setuptools\command\install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
          warnings.warn(
        running build
        running build_py
        creating build
        creating build\lib.win-amd64-cpython-311
        creating build\lib.win-amd64-cpython-311\preshed
        copying preshed\about.py -> build\lib.win-amd64-cpython-311\preshed
        copying preshed\__init__.py -> build\lib.win-amd64-cpython-311\preshed
        creating build\lib.win-amd64-cpython-311\preshed\tests
        copying preshed\tests\test_counter.py -> build\lib.win-amd64-cpython-311\preshed\tests
        copying preshed\tests\test_hashing.py -> build\lib.win-amd64-cpython-311\preshed\tests
        copying preshed\tests\test_pop.py -> build\lib.win-amd64-cpython-311\preshed\tests
        copying preshed\tests\__init__.py -> build\lib.win-amd64-cpython-311\preshed\tests
        copying preshed\counter.pyx -> build\lib.win-amd64-cpython-311\preshed
        copying preshed\maps.pyx -> build\lib.win-amd64-cpython-311\preshed
        copying preshed\counter.pxd -> build\lib.win-amd64-cpython-311\preshed
        copying preshed\maps.pxd -> build\lib.win-amd64-cpython-311\preshed
        copying preshed\__init__.pxd -> build\lib.win-amd64-cpython-311\preshed
        running build_ext
        building 'preshed.maps' extension
        creating build\temp.win-amd64-cpython-311
        creating build\temp.win-amd64-cpython-311\Release
        creating build\temp.win-amd64-cpython-311\Release\preshed
        "C:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.35.32215\bin\HostX86\x64\cl.exe" /c /nologo /O2 /W3 /GL /DNDEBUG /MD -IC:\Users\Administrator\.pyenv\pyenv-win\versions\3.11.3\include -IC:\Users\Administrator\.pyenv\pyenv-win\versions\3.11.3\include -IC:\Users\Administrator\.pyenv\pyenv-win\versions\3.11.3\Include "-IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.35.32215\include" "-IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.35.32215\ATLMFC\include" "-IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Auxiliary\VS\include" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.22000.0\ucrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\um" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\shared" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\winrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\cppwinrt" "-IC:\Program Files (x86)\Windows Kits\NETFXSDK\4.8\include\um" /EHsc /Tppreshed/maps.cpp /Fobuild\temp.win-amd64-cpython-311\Release\preshed/maps.obj /Ox /EHsc
        maps.cpp
        preshed/maps.cpp(181): fatal error C1083: Cannot open include file: 'longintrepr.h': No such file or directory
        error: command 'C:\\Program Files (x86)\\Microsoft Visual Studio\\2022\\BuildTools\\VC\\Tools\\MSVC\\14.35.32215\\bin\\HostX86\\x64\\cl.exe' failed with exit code 2
        [end of output]
     
        note: This error originates from a subprocess, and is likely not a problem with pip.
      error: legacy-install-failure
     
      Encountered error while trying to install package.
     
      preshed
     
      note: This is an issue with the package mentioned above, not pip.
      hint: See above for output from the failure.
      [end of output]

  note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error`

I tried looking at longintrepr.h in my python include folder and it was present there. I tried researching about the longintrepr.h and one method I found is using the --pre keyword. I also tried it and didn't work for me.
edit: markdown changes

[svlandeg]

Hi! I'm not immediately sure, but that's a pretty old version of spaCy - it might now work with Python 3.11. Have you tried with an older Python version / a newer spaCy version?

[adrianeboyd]

As a note, it isn't possible to build spacy v2.1.9 from source from the sdist on pypi for python 3.11 due to changes between python versions.

If you really need to install this version of spacy, you can:

• use an older supported/tested version of python (this release was tested up to python 3.7), where there are also precompiled wheels on pypi so you wouldn't need to build it from source
• if you have to use python 3.11, try installing directly from the spacy git repo from tag v2.1.9, which should regenerate the cython files that are causing problems in the older sdist; to install from source, follow these directions: https://v2.spacy.io/usage#source