Only SOH for Pack01

[GuentherKoll]

I have 5 Packs
Only the SOH for Pack01 is 100 %
The other SOHs are 0 %
So Total SOH is 20 %

[GuentherKoll]

With the Add-on "BMS Pace - Development" (that i used before) i got SOHs for all Packs

[fancyui]

what is your addon settings please?

[GuentherKoll]

Thank you very much for the quick query and processing! :-)
My settings:
host_name: homeassistant
mqtt_broker: core-mosquitto
mqtt_port: 1883
mqtt_username: homeassistant
mqtt_password: *****
device_name: Gobel Monitor
battery_manufacturer: Gobel Power
battery_model: GP-SR1-PC200
max_parallel_allowed: 16
connection_type: serial
battery_port: rs232
bms_type: PACE_LV
bms_ip_address: 10.0.0.5
bms_ip_port: 9999
bms_usb_port: /dev/ttyUSB0
bms_baud_rate: 9600
data_refresh_interval: 5
debug: 0
if_random: 1

[GuentherKoll]

I like it very much - the Add-on and the good manual !!!
Thank you very much for that !!!

[GuentherKoll]

ADS (DIP-Switches) are set to 1 - 5

[fancyui]

please show me pack 02 overview of dashboard

[GuentherKoll]

[fancyui]

pack_data['view_SOH'] = round(pack_full_capacity / pack_design_capacity * 100, 0)

SOH is caculated in the addon by Full Capacity/Design Capacity, not read from BMS, here Full Capacity and Design Capacity are right, should not be 0.

Could you check Home Assistant -> Settings -> Device & services -> MQTT -> Sensors, if SOH is right here? I think the sensor name is wrong in the dashboard.

[fancyui]

Or in Home Assistant -> Settings -> Device & services -> MQTT -> Integration entries, delete then add MQTT again, this will clear all unused entries.

[GuentherKoll]

Name in Home Assistant -> Settings -> Device & services -> MQTT -> Sensors is sensor.gobel_monitor_pack_02_view_soh (value 0 %)
Name in Dashboard also is sensor.gobel_monitor_pack_02_view_soh
In MQTT there are only (searching for "soh"):

• sensor.gobel_monitor_pack_01_view_soh
• sensor.gobel_monitor_pack_02_view_soh
• sensor.gobel_monitor_pack_03_view_soh
• sensor.gobel_monitor_pack_04_view_soh
• sensor.gobel_monitor_pack_05_view_soh
• sensor.gobel_monitor_total_soh

There are no unused entries.
I dont understand, what to "delete then add MQTT again". Should i delete sensor.gobel_monitor_pack_02_view_soh and then it is added with next update of the values?

[fancyui]

delete, then config MQTT again with same name/password.

old data will not be deleted.

[GuentherKoll]

delete, then config MQTT again with same name/password => this did not solve the problem.
may "debug" in the "Gobel Battery Monitor" help? What value?