[VPlan] Retain exit conditions and edges in initial VPlan (NFC).

Update initial VPlan construction to include exit conditions and
edges.

For now, all early exits are disconnected before forming the regions,
but a follow-up will update uncountable exit handling to also happen
here. This is required to enable VPlan predication and remove the
dependence any IR BBs (llvm#128420).

This includes updates in a few places to use
replaceSuccessor/replacePredecessor to preserve the order of predecessors
and successors, to reduce the need of fixing up phi operand orderings.
This unfortunately required making them public, not sure if there's a

Author: fhahn

llvm/lib/Transforms/Vectorize/LoopVectorize.cpp

@@ -9167,6 +9167,7 @@ void LoopVectorizationPlanner::buildVPlansWithVPRecipes(ElementCount MinVF,
 // loop.
 static void addCanonicalIVRecipes(VPlan &Plan, Type *IdxTy, bool HasNUW,
                                   DebugLoc DL) {
+  using namespace VPlanPatternMatch;
   Value *StartIdx = ConstantInt::get(IdxTy, 0);
   auto *StartV = Plan.getOrAddLiveIn(StartIdx);
 
@@ -9176,7 +9177,16 @@ static void addCanonicalIVRecipes(VPlan &Plan, Type *IdxTy, bool HasNUW,
   VPBasicBlock *Header = TopRegion->getEntryBasicBlock();
   Header->insert(CanonicalIVPHI, Header->begin());
 
-  VPBuilder Builder(TopRegion->getExitingBasicBlock());
+  VPBasicBlock *LatchVPBB = TopRegion->getExitingBasicBlock();
+  // We are about to replace the branch to exit the region. Remove the original
+  // BranchOnCond, if there is any.
+  // TODO: Move canonical IV and BranchOnCount introduction to initial skeleton
+  // creation.
+  if (!LatchVPBB->empty() &&
+      match(&LatchVPBB->back(), m_BranchOnCond(m_VPValue())))
+    LatchVPBB->getTerminator()->eraseFromParent();
+
+  VPBuilder Builder(LatchVPBB);
   // Add a VPInstruction to increment the scalar canonical IV by VF * UF.
   auto *CanonicalIVIncrement = Builder.createOverflowingOp(
       Instruction::Add, {CanonicalIVPHI, &Plan.getVFxUF()}, {HasNUW, false}, DL,

llvm/lib/Transforms/Vectorize/VPlan.h

@@ -117,6 +117,7 @@ class VPBlockBase {
     Predecessors.erase(Pos);
   }
 
+public:
   /// Remove \p Successor from the successors of this block.
   void removeSuccessor(VPBlockBase *Successor) {
     auto Pos = find(Successors, Successor);
@@ -129,8 +130,6 @@ class VPBlockBase {
   void replacePredecessor(VPBlockBase *Old, VPBlockBase *New) {
     auto I = find(Predecessors, Old);
     assert(I != Predecessors.end());
-    assert(Old->getParent() == New->getParent() &&
-           "replaced predecessor must have the same parent");
     *I = New;
   }
 

llvm/lib/Transforms/Vectorize/VPlanConstruction.cpp

@@ -112,6 +112,9 @@ VPBasicBlock *PlainCFGBuilder::getOrCreateVPBB(BasicBlock *BB) {
     return VPBB;
   }
 
+  if (!TheLoop->contains(BB))
+    return Plan->getExitBlock(BB);
+
   // Create new VPBB.
   StringRef Name = BB->getName();
   LLVM_DEBUG(dbgs() << "Creating VPBasicBlock for " << Name << "\n");
@@ -145,14 +148,6 @@ bool PlainCFGBuilder::isExternalDef(Value *Val) {
     // Instruction definition is in outermost loop PH.
     return false;
 
-  // Check whether Instruction definition is in a loop exit.
-  SmallVector<BasicBlock *> ExitBlocks;
-  TheLoop->getExitBlocks(ExitBlocks);
-  if (is_contained(ExitBlocks, InstParent)) {
-    // Instruction definition is in outermost loop exit.
-    return false;
-  }
-
   // Check whether Instruction definition is in loop body.
   return !TheLoop->contains(Inst);
 }
@@ -201,11 +196,6 @@ void PlainCFGBuilder::createVPInstructionsForVPBB(VPBasicBlock *VPBB,
            "Instruction shouldn't have been visited.");
 
     if (auto *Br = dyn_cast<BranchInst>(Inst)) {
-      if (TheLoop->getLoopLatch() == BB ||
-          any_of(successors(BB),
-                 [this](BasicBlock *Succ) { return !TheLoop->contains(Succ); }))
-        continue;
-
       // Conditional branch instruction are represented using BranchOnCond
       // recipes.
       if (Br->isConditional()) {
@@ -295,7 +285,6 @@ std::unique_ptr<VPlan> PlainCFGBuilder::buildPlainCFG(
   for (BasicBlock *BB : RPO) {
     // Create or retrieve the VPBasicBlock for this BB.
     VPBasicBlock *VPBB = getOrCreateVPBB(BB);
-    Loop *LoopForBB = LI->getLoopFor(BB);
     // Set VPBB predecessors in the same order as they are in the incoming BB.
     setVPBBPredsFromBB(VPBB, BB);
 
@@ -326,24 +315,12 @@ std::unique_ptr<VPlan> PlainCFGBuilder::buildPlainCFG(
     BasicBlock *IRSucc1 = BI->getSuccessor(1);
     VPBasicBlock *Successor0 = getOrCreateVPBB(IRSucc0);
     VPBasicBlock *Successor1 = getOrCreateVPBB(IRSucc1);
-
-    // Don't connect any blocks outside the current loop except the latches for
-    // inner loops.
-    // TODO: Also connect exit blocks during initial VPlan construction.
-    if (LoopForBB == TheLoop || BB != LoopForBB->getLoopLatch()) {
-      if (!LoopForBB->contains(IRSucc0)) {
-        VPBB->setOneSuccessor(Successor1);
-        continue;
-      }
-      if (!LoopForBB->contains(IRSucc1)) {
-        VPBB->setOneSuccessor(Successor0);
-        continue;
-      }
-    }
-
     VPBB->setTwoSuccessors(Successor0, Successor1);
   }
 
+  for (auto *EB : Plan->getExitBlocks())
+    setVPBBPredsFromBB(EB, EB->getIRBasicBlock());
+
   // 2. The whole CFG has been built at this point so all the input Values must
   // have a VPlan counterpart. Fix VPlan header phi by adding their
   // corresponding VPlan operands.
@@ -446,19 +423,21 @@ static void createLoopRegion(VPlan &Plan, VPBlockBase *HeaderVPB) {
   VPBlockBase *Succ = LatchVPBB->getSingleSuccessor();
   assert(LatchVPBB->getNumSuccessors() <= 1 &&
          "Latch has more than one successor");
-  if (Succ)
-    VPBlockUtils::disconnectBlocks(LatchVPBB, Succ);
+  LatchVPBB->removeSuccessor(Succ);
 
   auto *R = Plan.createVPRegionBlock(HeaderVPB, LatchVPBB, "",
                                      false /*isReplicator*/);
   // All VPBB's reachable shallowly from HeaderVPB belong to top level loop,
   // because VPlan is expected to end at top level latch disconnected above.
+  SmallPtrSet<VPBlockBase *, 2> ExitBlocks(Plan.getExitBlocks().begin(),
+                                           Plan.getExitBlocks().end());
   for (VPBlockBase *VPBB : vp_depth_first_shallow(HeaderVPB))
-    VPBB->setParent(R);
+    if (!ExitBlocks.contains(VPBB))
+      VPBB->setParent(R);
 
   VPBlockUtils::insertBlockAfter(R, PreheaderVPBB);
-  if (Succ)
-    VPBlockUtils::connectBlocks(R, Succ);
+  R->setOneSuccessor(Succ);
+  Succ->replacePredecessor(LatchVPBB, R);
 }
 
 void VPlanTransforms::prepareForVectorization(VPlan &Plan, Type *InductionTy,
@@ -476,8 +455,29 @@ void VPlanTransforms::prepareForVectorization(VPlan &Plan, Type *InductionTy,
   VPBlockUtils::insertBlockAfter(VecPreheader, Plan.getEntry());
 
   VPBasicBlock *MiddleVPBB = Plan.createVPBasicBlock("middle.block");
-  VPBlockUtils::connectBlocks(LatchVPB, MiddleVPBB);
-  LatchVPB->swapSuccessors();
+  VPBlockBase *LatchExitVPB = LatchVPB->getNumSuccessors() == 2
+                                  ? LatchVPB->getSuccessors()[0]
+                                  : nullptr;
+  if (LatchExitVPB) {
+    LatchVPB->getSuccessors()[0] = MiddleVPBB;
+    MiddleVPBB->setPredecessors({LatchVPB});
+    MiddleVPBB->setSuccessors({LatchExitVPB});
+    LatchExitVPB->replacePredecessor(LatchVPB, MiddleVPBB);
+  } else {
+    VPBlockUtils::connectBlocks(LatchVPB, MiddleVPBB);
+    LatchVPB->swapSuccessors();
+  }
+
+  // Disconnect all edges between exit blocks other than from the latch.
+  // TODO: Uncountable exit blocks should be handled here.
+  for (VPBlockBase *EB : to_vector(Plan.getExitBlocks())) {
+    for (VPBlockBase *Pred : to_vector(EB->getPredecessors())) {
+      if (Pred == MiddleVPBB)
+        continue;
+      cast<VPBasicBlock>(Pred)->getTerminator()->eraseFromParent();
+      VPBlockUtils::disconnectBlocks(Pred, EB);
+    }
+  }
 
   // Create SCEV and VPValue for the trip count.
   // We use the symbolic max backedge-taken-count, which works also when
@@ -503,8 +503,9 @@ void VPlanTransforms::prepareForVectorization(VPlan &Plan, Type *InductionTy,
   //    Thus if tail is to be folded, we know we don't need to run the
   //    remainder and we can set the condition to true.
   // 3) Otherwise, construct a runtime check.
-
   if (!RequiresScalarEpilogueCheck) {
+    if (LatchExitVPB)
+      VPBlockUtils::disconnectBlocks(MiddleVPBB, LatchExitVPB);
     VPBlockUtils::connectBlocks(MiddleVPBB, ScalarPH);
     // The exit blocks are unreachable, remove their recipes to make sure no
     // users remain that may pessimize transforms.
@@ -516,9 +517,6 @@ void VPlanTransforms::prepareForVectorization(VPlan &Plan, Type *InductionTy,
   }
 
   // The connection order corresponds to the operands of the conditional branch.
-  BasicBlock *IRExitBlock = TheLoop->getUniqueLatchExitBlock();
-  auto *VPExitBlock = Plan.getExitBlock(IRExitBlock);
-  VPBlockUtils::connectBlocks(MiddleVPBB, VPExitBlock);
   VPBlockUtils::connectBlocks(MiddleVPBB, ScalarPH);
 
   auto *ScalarLatchTerm = TheLoop->getLoopLatch()->getTerminator();

llvm/test/Transforms/LoopVectorize/vplan-printing-outer-loop.ll

@@ -31,7 +31,11 @@ define void @foo(i64 %n) {
 ; CHECK-NEXT: outer.latch:
 ; CHECK-NEXT:   EMIT ir<%outer.iv.next> = add ir<%outer.iv>, ir<1>
 ; CHECK-NEXT:   EMIT ir<%outer.ec> = icmp ir<%outer.iv.next>, ir<8>
-; CHECK-NEXT: Successor(s): outer.header
+; CHECK-NEXT:   EMIT branch-on-cond ir<%outer.ec>
+; CHECK-NEXT: Successor(s): ir-bb<exit>, outer.header
+; CHECK-EMPTY:
+; CHECK-NEXT: ir-bb<exit>:
+; CHECK-NEXT: No successors
 ; CHECK-NEXT: }
 entry:
   br label %outer.header