Scoppy and the Pico 2 (and other RP235x boards).

[fhdm-dev]

Unfortunately the Scoppy firmware will be affected by the E9-Erratum issue.

Because of this I don't know if or when there will be a version of Scoppy for the Pico 2.

[kd7eir]

Let's hope for a quick Pico 2A?

[shtirlic]

Hi, is it correct that logic analyzer gpios and everything without pull down is not affected? Hoping to see the firmware build for 2350.

[fhdm-dev]

I believe so. It's just the voltage range GPIO that are affected (when used as inputs).

[shtirlic]

@fhdm-dev Looking forward for beta release for 2350, want to use it with my Pixel

[Seba-SL]

Hi, is for this that the uf2 file dont work in my raspberry pi pico2 ?

[fhdm-dev]

It's because the uf2 that is currently available is specifically for the original Pico. I will need to create a uf2 for the Pico 2 (or a universal uf2 that will work with both).

[ohault]

It's because the uf2 that is currently available is specifically for the original Pico. I will need to create a uf2 for the Pico 2 (or a universal uf2 that will work with both).

Hi, it will be highly appreciate for both the Pico 2 and Pico 2 W. Thank you.

[jhonas4565]

Lamentablemente, el firmware de Sppy se verá afectado por el problema E9-Erratum .

Por eso no sé si habrá una versión de Scoppy para Pico 2 o cuándo.

Still nothing for the 2w peak?? I had bought the raspberry without reading the forum.

[p3t3rm0v]

Not solved with new s4?

[fhdm-dev]

Hi. It was solved a while ago. Scoppy firmware for the Pico 2 and Pico 2 W can be downloaded from here and should work with the A4 stepping (though I haven't tested it).

[fhdm-dev]

Scoppy firmware for the Pico 2 is now available. It can be downloaded from here.

Firmware for the Pico 2 W will (hopefully) be available soon.

[fhdm-dev]

Scoppy firmware for the Pico 2 W is now available. It can be downloaded from here.

[ohault]

Scoppy firmware for the Pico 2 W is now available. It can be downloaded from here.

Thank you @fhdm-dev. I have just successfully tested with a Pico 2 W.

[sergio-caracas]

Now that the erratum is fixed will you consider s new version compatible with RP2350 A4?

[fhdm-dev]

Hi.

The existing Pico 2 firmware should work with the RP2350 A4 stepping.

I don't have an A4 stepping that I can test with but according to this thread on the Rasperry Pi Forums, firmware written for the A2 stepping is compatible with the A4.