Add electronics BOM with Mouser part numbers

BillOfMaterials/electronics.csv

@@ -0,0 +1,46 @@
+Item,Count,Mouser P/N
+,,
+"Capacitor, 0.1µF, ceramic (KEMET C315C104K1R5TA)",9,80-C315C104K1R
+"Capacitor, 10µF, electrolytic (KEMET ESL106M050AC3AA)",1,80-ESL106M050AC3AA
+"Capacitor, 1000µF, electrolytic (Rubycon 10ZLH1000MEFC8X16)",1,232-10ZLH1000MEFC8X1
+"Connector, DC barrel jack, 2.0x6.5mm (CUI PJ-102A)",1,490-PJ-102A
+"Connector, DB9, male, .318"" footprint (NorComp 182-009-113R531)",2,636-182-009-113R531
+"Connector, RCA jack, black (CUI RCJ-011)",1,490-RCJ-011
+"Connector, RCA jack, yellow (CUI RCJ-014)",1,490-RCJ-014
+"Crystal, 5Mhz 20pF, HC-49/US (ECS ECS-50-20-4X)",1,520-HCU500-20X
+"DIP socket, 40-pin wide",3,571-1-2199299-5
+"DIP socket, 32-pin wide",1,571-1-2199300-2
+"DIP socket, 20-pin",1,571-1-2199298-6
+"DIP socket, 16-pin",1,571-1-2199298-4
+"DIP socket, 8-pin",1,571-1-2199298-2
+"Diode, small-signal, 1N4148",10,512-1N4148
+"Header, female .100"", 20-pin right-angle (can use Raspberry Pi Pico/ESP32 stackable headers and bend)",1,474-PRT-14311
+"Header, male .100"", right angle (~ 40-pin breakaway)",1,474-PRT-00553
+"Header, male .100"", straight (~ 40-pin breakaway)",1,474-PRT-00116
+"IC, LM2937ET-3.3 voltage regulator",1,926-LM2937ET-3.3NOPB
+"IC, P8X32A Propeller 1, DIP-40",1,619-P8X32A-D40
+"IC, 24LC256 I2C EEPROM 32-kilobyte, DIP-8",1,579-24LC256-I/P
+"IC, 74HC541 octal line driver, DIP-20",1,595-CD74HC541E
+"IC, W65C02 microprocessor, DIP-40",1,955-W65C02S6TPG-14
+"IC, AS6C1008 static RAM 128-kilobyte, DIP-32",1,913-AS6C1008-55PCN
+"IC, W65C22 Versatile Interface Adapter, DIP-40",1,955-W65C22S6TPG-14
+"IC, CD4051 1-of-8 analog multiplexer, DIP-16",1,595-CD4051BE
+"Jumper/shunt, 2-pin (Harwin M7583-46)",1,855-M7583-46
+"Jumper wires (""jerky""), 10cm with .100"" female connector",1,854-ZW-FF-10
+"LED, 10mm, blue, through-hole",1,474-COM-10635
+"Programmer, ""Prop Plug"" (Propeller-compatible FTDI device)",1,619-32201
+"Resistor, 1kΩ, 1/4 watt, 5% tolerance",1,603-CFR-25JR-521K
+"Resistor, 3.3kΩ, 1/4 watt, 5% tolerance",1,603-CFR-25JR-523K3
+"Resistor, 10kΩ,1/4 watt, 5% tolerance",8,603-CFR-25JB-52-10K
+"Resistor, 220Ω, 1/4 watt, 1% tolerance",1,603-MFR-25FBF52-220R
+"Resistor, 270Ω, 1/4 watt, 1% tolerance",1,603-MFR-25FBF52-270R
+"Resistor, 560Ω, 1/4 watt, 1% tolerance",1,603-MFR-25FTF52-560R
+"Resistor, 1.1kΩ, 1/4 watt, 1% tolerance",1,603-MFR-25FTE52-1K1
+"Switch, Cherry MX keyboard, 5 pin, PCB mount",31,540-MX1A-E1NW
+,,
+"OPTIONAL (CARTRIDGE/PROGRAMMER): Capacitor, 0.1µF, ceramic (KEMET C315C104K1R5TA)",1,80-C315C104K1R
+"OPTIONAL (CARTRIDGE/PROGRAMMER): DIP socket, 8-pin",1,571-1-2199298-2
+"OPTIONAL (CARTRIDGE/PROGRAMMER): Header, male .100"", right angle (~ 40-pin breakaway)",1,474-PRT-00553
+"OPTIONAL (CARTRIDGE/PROGRAMMER): Header, male .100"", straight (~ 40-pin breakaway)",1,474-PRT-00116
+"OPTIONAL (CARTRIDGE/PROGRAMMER): IC, 25LC1024 SPI EEPROM 128-kilobyte, DIP-8",1,579-25LC1024-E/P
+"OPTIONAL (CARTRIDGE/PROGRAMMER): Jumper/shunt, 2-pin (Harwin M7583-46)",3,855-M7583-46

README.md

@@ -13,6 +13,7 @@ Each subdirectory contains a portion of the design:
 - `STL` contains the generated STL files suitable for slicing and printing.
 - `Tass` contains the `64tass` assembly files for Cody BASIC and demo programs.
 - `CodyBASIC` contains some sample Cody BASIC programs used for demo purposes.
+- `BillOfMaterials` contains spreadsheets with possible options for sourcing parts.
 
 All design files and sources are released under the GPL version 3. A mention
 of the Cody Computer in any derived works is also appreciated.
@@ -23,6 +24,3 @@ but may be freely distributed. Visit
 
 If any technical issues or inaccuracies are found in any of the material,
 please reach out to the author or raise an issue on GitHub.
-
-Frederick John Milens III \
-December 2024