diff --git a/administration/networking.md b/administration/networking.md
index efd17162b..7bddbb81a 100644
--- a/administration/networking.md
+++ b/administration/networking.md
@@ -56,19 +56,25 @@ On Linux, the effective backlog value might be capped by the kernel parameter `n
 
 The following table describes the network configuration properties available and their usage in optimizing performance or adjusting configuration needs for plugins that rely on networking I/O:
 
-| Property | Description | Default |
-| :------- |:------------|:--------|
-| `net.connect_timeout` | Set maximum time expressed in seconds to wait for a TCP connection to be established, including the TLS handshake time. | `10` |
-| `net.connect_timeout_log_error` | On connection timeout, specify if it should log an error. When disabled, the timeout is logged as a debug message. | `true` |
-| `net.dns.mode` | Select the primary DNS connection type (TCP or UDP). Can be set in the `[SERVICE]` section and overridden on a per plugin basis if desired. | _none_ |
-| `net.dns.prefer_ipv4` | Prioritize IPv4 DNS results when trying to establish a connection. | `false` |
-| `net.dns.resolver`| Select the primary DNS resolver type (`LEGACY` or `ASYNC`). | _none_ |
-| `net.keepalive` | Enable or disable connection keepalive support. Accepts a Boolean value: `on` or `off`.  | `on` |
-| `net.keepalive_idle_timeout` | Set maximum time expressed in seconds for an idle keepalive connection. | `30` |
-| `net.keepalive_max_recycle` | Set maximum number of times a keepalive connection can be used before it's retired. | `2000` |
-| `net.max_worker_connections` | Set maximum number of TCP connections that can be established per worker. | `0` (unlimited) |
-| `net.source_address` | Specify network address to bind for data traffic. | _none_ |
-| `net.backlog` | Set the maximum number of pending connections for listening sockets. This option requires Fluent Bit version 4.0.4 or later. | `128` |
+| Property                        | Description                                                                                                        | Default |
+|:--------------------------------|:-------------------------------------------------------------------------------------------------------------------|:--------|
+| `net.connect_timeout`           | Set maximum time allowed to establish a connection, this time includes the TLS handshake.                          | `10s`   |
+| `net.connect_timeout_log_error` | On connection timeout, specify if it should log an error. When disabled, the timeout is logged as a debug message. | `true`  |
+| `net.io_timeout`                | Set maximum time a connection can stay idle while assigned.                                                        | `0s`    |
+| `net.keepalive`                 | Enable or disable connection keepalive support.                                                                    | `true`  |
+| `net.keepalive_idle_timeout`    | Set maximum time expressed in seconds for an idle keepalive connection.                                            | `30s`   |
+| `net.dns.mode`                  | Select the primary DNS connection type (`TCP` or `UDP`).                                                           | _none_  |
+| `net.dns.prefer_ipv4`           | Prioritize IPv4 DNS results when trying to establish a connection.                                                 | `false` |
+| `net.dns.prefer_ipv6`           | Prioritize IPv6 DNS results when trying to establish a connection.                                                 | `false` |
+| `net.dns.resolver`              | Select the primary DNS resolver type (`LEGACY` or `ASYNC`).                                                        | _none_  |
+| `net.keepalive_max_recycle`     | Set maximum number of times a keepalive connection can be used before it's retired.                                | `2000`  |
+| `net.max_worker_connections`    | Set maximum number of TCP connections that can be established per worker.                                          | `0`     |
+| `net.proxy_env_ignore`          | Ignore the environment variables `HTTP_PROXY`, `HTTPS_PROXY` and `NO_PROXY` when set.                              | `false` |
+| `net.tcp_keepalive`             | Enable or disable Keepalive support.                                                                               | `off`   |
+| `net.tcp_keepalive_time`        | Interval between the last data packet sent and the first TCP keepalive probe.                                      | `-1`    |
+| `net.tcp_keepalive_interval`    | Interval between TCP keepalive probes when no response is received on a `keepidle` probe.                          | `-1`    |
+| `net.tcp_keepalive_probes`      | Number of unacknowledged probes to consider a connection dead.                                                     | `-1`    |
+| `net.source_address`            | Specify network address to bind for data traffic.                                                                  | _none_  |
 
 ## Example
 
@@ -97,10 +103,10 @@ pipeline:
       format: json_lines
       # Networking Setup
       net.dns.mode: TCP
-      net.connect_timeout: 5
+      net.connect_timeout: 5s
       net.source_address: 127.0.0.1
-      net.keepalive: on
-      net.keepalive_idle_timeout: 10
+      net.keepalive: true
+      net.keepalive_idle_timeout: 10s
 ```
 
 {% endtab %}
@@ -123,10 +129,10 @@ pipeline:
   format    json_lines
   # Networking Setup
   net.dns.mode                TCP
-  net.connect_timeout         5
+  net.connect_timeout         5s
   net.source_address          127.0.0.1
-  net.keepalive               on
-  net.keepalive_idle_timeout  10
+  net.keepalive               true
+  net.keepalive_idle_timeout  10s
 ```
 
 {% endtab %}
@@ -152,4 +158,4 @@ $ nc -l 9090
 
 If the `net.keepalive` option isn't enabled, Fluent Bit closes the TCP connection and netcat quits.
 
-After the five records arrive, the connection idles. After 10 seconds, the connection closes due to `net.keepalive_idle_timeout`.
\ No newline at end of file
+After the five records arrive, the connection idles. After 10 seconds, the connection closes due to `net.keepalive_idle_timeout`.