Added how to set the squawk to bg

Author: frankkopp

docs/pilots-corner/a380x/a380x-beginner-guide/02_cockpit-preparation.md

@@ -301,14 +301,15 @@ In the simulator, we are usually alone, so we will do the flow on our own.
 `COCKPIT DOOR SWITCH (INOP).......................................... NORM`<br/>
 `ATC CLEARANCE .....................................................OBTAIN`<br/>
 ??? note "ATC Clearance"
-    <p style="color:yellow; font-size:24px;">TODO: Improve.</p>
-    It is recommended to obtain the ATC clearance before starting the engines.
+    We will cover the ATC clearance in the next chapter when we prepare the FMS.    
 `NAVIGATION CHARTS ............................................... PREPARE`<br/>
 `MFD SURVEILLANCE DEFAULT SETTINGS................................. SELECT`<br/>
 ??? note "MFD Default Settings"
     Verify on the multi function display surveillance control page that the transponder is set to AUTO, the squawk code
     is the same, the TCAS is set to TA/RA and Norm, all TAWS modes are ON, and the weather radar is set to AUTO, the
     elevation/tilt to AUTO, Mode set to WX, TURB set to AUTO, GAIN set to AUTO, WX ON VD set to ON and PRED W/S to AUTO)
+    
+    We will cover how to set the squawk code in the next chapter when we prepare the FMS.
 
 ??? tip "How and Where?"
     [Flight Deck Overview](../../a380x-briefing/flight-deck){ .md-button }

docs/pilots-corner/a380x/a380x-beginner-guide/03_preparing-fms.md

@@ -60,6 +60,18 @@ Visit [Cockpit Preparation](02_cockpit-preparation.md) to learn more.
 
     Additional reading material: [The CRAFT mnemonic](https://en.wikipedia.org/wiki/CRAFT_(aviation)){target=new}
 
+??? tip "Setting the Squawk Code"
+    In the ATC IFR clearance you will be assigned a squawk code. This code is used to identify your aircraft on radar.
+
+    To set the squawk code, you can use the [Radio Management Panel (RMP)](../a380x-briefing/flight-deck/pedestal/rmp.md)
+    on the pedestal or the [MFD](../a380x-briefing/flight-deck/main-panel/mfd.md) Surveillance (SURV) page.
+
+    In the MFD Surveillance page, you can set the squawk code by clicking on the `SQWK` field and typing in the assigned 
+    code and confirm with ENTER. Then click on the AUTO button to activate the squawk code. 
+
+    MFD Surveilance Page - Setting the squawk code `2000`:<br/>
+    ![img.png](../assets/beginner-guide/03_preparing-fms/fms-surv-sqwk.png){loading=lazy}
+
 ---
 
 ## Chapters / Phases