Remove LCD code comments

Author: StellasFun

ports/espressif/boards/m5stack_stamp_s3/board.c

@@ -5,99 +5,3 @@
 // SPDX-License-Identifier: MIT
 
 #include "supervisor/board.h"
-
-// Below section commented out due to LCD not being included by default with StampS3
-// Can be re-enabled to add LCD functionality included by Cardputer replacement kit
-
-/*
-
-#include "mpconfigboard.h"
-#include "supervisor/shared/serial.h"
-#include "shared-bindings/busio/SPI.h"
-#include "shared-bindings/fourwire/FourWire.h"
-#include "shared-bindings/microcontroller/Pin.h"
-#include "shared-module/displayio/__init__.h"
-#include "shared-module/displayio/mipi_constants.h"
-#include "shared-bindings/board/__init__.h"
-#include "py/runtime.h"
-#include "py/ringbuf.h"
-#include "shared/runtime/interrupt_char.h"
-
-
-#define DELAY 0x80
-
-uint8_t display_init_sequence[] = {
-    // SWRESET and Delay 140ms
-    0x01, 0 | DELAY, 140,
-    // SLPOUT and Delay 10ms
-    0x11, 0 | DELAY, 10,
-    // COLMOD 65k colors and 16 bit 5-6-5
-    0x3A, 1, 0x55,
-    // INVON Iiversion on
-    0x21, 0,
-    // NORON normal operation (full update)
-    0x13, 0,
-    // MADCTL columns RTL, page/column reverse order
-    0x36, 1, 0x60,
-    // RAMCTRL color word little endian
-    0xB0, 2, 0x00, 0xF8,
-    // DIPON display on
-    0x29, 0,
-};
-
-
-// Overrides the weakly linked function from supervisor/shared/board.c
-void board_init(void) {
-    busio_spi_obj_t *spi = common_hal_board_create_spi(0);
-    fourwire_fourwire_obj_t *bus = &allocate_display_bus()->fourwire_bus;
-    bus->base.type = &fourwire_fourwire_type;
-
-    // see here for inspiration: https://github.com/m5stack/M5GFX/blob/33d7d3135e816a86a008fae8ab3757938cee95d2/src/M5GFX.cpp#L1350
-    common_hal_fourwire_fourwire_construct(
-        bus,
-        spi,
-        &pin_GPIO34,    // DC
-        &pin_GPIO37,     // CS
-        &pin_GPIO33,    // RST
-        40000000,       // baudrate
-        0,              // polarity
-        0               // phase
-        );
-    busdisplay_busdisplay_obj_t *display = &allocate_display()->display;
-    display->base.type = &busdisplay_busdisplay_type;
-
-    common_hal_busdisplay_busdisplay_construct(
-        display,
-        bus,
-        240,            // width (after rotation)
-        135,            // height (after rotation)
-        40,             // column start
-        53,             // row start
-        0,              // rotation
-        16,             // color depth
-        false,          // grayscale
-        false,          // pixels in a byte share a row. Only valid for depths < 8
-        1,              // bytes per cell. Only valid for depths < 8
-        false,          // reverse_pixels_in_byte. Only valid for depths < 8
-        false,          // reverse_pixels_in_word
-        MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command
-        MIPI_COMMAND_SET_PAGE_ADDRESS,   // set row command
-        MIPI_COMMAND_WRITE_MEMORY_START, // write memory command
-        display_init_sequence,
-        sizeof(display_init_sequence),
-        &pin_GPIO38,    // backlight pin
-        NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness
-        false,          // single_byte_bounds
-        false,          // data_as_commands
-        true,           // auto_refresh
-        60,             // native_frames_per_second
-        true,           // backlight_on_high
-        false,          // SH1107_addressing
-        350             // backlight pwm frequency
-        );
-}
-
-// TODO: Should we turn off the display when asleep, in board_deinit() ?
-
-*/