feat: Update F2101 / F2102 document.

Author: dliecok

docs/product/f2101/index.mdx

@@ -30,7 +30,7 @@ This expansion board features dual 18650 battery holders, a solar charging inter
     *   Battery protection chip for safe operation
 
 *   **Expansion and Connectivity:**
-    *   Two rows of double 14-pin female headers, adapted for QUILL series
+    *   Two rows of double 14-pin female headers, in addition to meeting the needs of the QUILL series, there are additional free pins.
     *   4pin SH1.0 IIC interface for easy integration with sensors and peripherals
 
 ## Packing List

docs/product/f2101/quickstart.mdx

@@ -29,9 +29,11 @@ FoBE Base with Solar Power is a PCB with dimensions of 100mm * 42.8mm, designed
 
 The boost voltage output can be manually set using the 2-bit switch on the board. The S1/S2 switch configurations correspond to the following output voltages:
 
-*   0/0 - 5V
-*   1/0 - 9V
-*   1/1 - 12V
+| S1|S2 | Output Voltage |
+|---|---|----------------|
+| 0 | 0 | 5V             |
+| 1 | 0 | 9V             |
+| 1 | 1 | 12V            |
 
 ## Status Indicators
 

docs/product/f2101/resources.mdx

@@ -11,3 +11,8 @@ title: Resources
 **\[DXF\]** [FoBE Base with Solar Power Dimension](/)
 
 **\[STL\]** [FoBE Base with Solar Power 3D Model](/)
+
+**\[IC\]** [TI-TPS61088RHLR](https://www.ti.com/cn/lit/ds/symlink/tps61088.pdf?ts=1753754780893&ref_url=https%253A%252F%252Fitem.szlcsc.com%252F)
+
+
+**\[IC\]** [CN3791](https://atta.szlcsc.com/upload/public/pdf/source/20180228/C154992_15198053154561377167.pdf)

docs/product/f2102/index.mdx

@@ -29,6 +29,7 @@ The board features a rotary encoder, two buttons for easy user interface operati
     *   LoRa transceiver with IPEX antenna connector
     *   0.96-inch OLED screen
     *   Gyroscope IC with a 3D digital accelerometer and a 3D digital gyroscope
+    *  Buzzer for audio feedback
 
 *   **User Interface:**
     *   Rotary encoder for easy navigation

docs/product/f2102/quickstart.mdx

@@ -91,6 +91,10 @@ The GPS module has the following pin assignments:
 | PPS      | **P0.08** |
 | WAKE     | **P0.06** |
 
-### GNSS Configuration Jumper
+## Configuration Jumper
 
-The board features a GALAXY solder pad. Soldering this pad configures the module to use GPS + GLONASS. By default, the pad is not soldered, and the module uses BeiDou + GPS.
+The board features a jumper pads:
+
+|Interface                           |Description |
+|-------------------------------|---------|
+|CONSTELLATION |Soldering this pad configures the module to use GPS + GLONASS. By default, the pad is not soldered, and the module uses BeiDou + GPS. |

docs/product/f2102/resources.mdx

@@ -11,3 +11,12 @@ title: Resources
 **\[DXF\]** [FoBE Base Cube nRF52840 Dimension](/)
 
 **\[STL\]** [FoBE Base Cube nRF52840 3D Model](/)
+
+**\[IC\]** [Quectel_L76K](https://files.waveshare.com/upload/d/db/Quectel_L76K_Hardware_Design_V1.0.pdf)
+
+**\[IC\]** [buzzer_MLT-8530](https://atta.szlcsc.com/upload/public/pdf/source/20170522/1495448322339.pdf)
+
+**\[IC\]** [ST-LSM6DS3TR](https://atta.szlcsc.com/upload/public/pdf/source/20180410/C95230_E9546B888C12D8CC6F7F231B3BE24882.pdf)
+
+**\[IC\]** [TI-BQ21040DBVR](https://www.ti.com/cn/lit/ds/symlink/bq21040.pdf?ts=1753777643597)
+