Skip to content

Commit 9d0a59d

Browse files
dliecokdliecok
committed
feat: Update F2210 document.[skip ci]
1 parent 73e5748 commit 9d0a59d

File tree

5 files changed

+152
-11
lines changed

5 files changed

+152
-11
lines changed

‎docs/product/f2210/index.mdx‎

Lines changed: 58 additions & 4 deletions
Original file line numberDiff line numberDiff line change
@@ -1,10 +1,64 @@
11
---
22
title: Overview
33
sidebar_label: Overview
4-
description: Overview of FoBE Core nRF52840 Mesh.
4+
description: Overview of FoBE Breakout GP8403.
55
order: 1
66
---
77

8-
:::warning
9-
This page is under construction.
10-
:::
8+
# FoBE Breakout GP8403
9+
10+
#### I2C 0-5V/0-10V two channel DAC Module.
11+
12+
<br/>
13+
<div style={{ textAlign: 'center' }}>
14+
<img src="/img/products/f2210-1a.main.png" alt="FoBE Breakout GP8403 Main" style={{ width: '80%', height: 'auto' }} />
15+
</div>
16+
<br/>
17+
18+
## Introduction
19+
20+
FoBE Breakout GP8403 can convert I2C signals into analog signals, and can linearly convert 12-bit digital values 0x000-0xFFF into 0-5V or 0-10V analog Voltage; The Output voltage error: < 0.5%.
21+
22+
There is an eeprom on board, can store the calibration parameter.
23+
24+
## Applications
25+
- General signal conversion
26+
- Motor speed regulation, LED dimming
27+
- Inverter, power supply
28+
- Industrial analog signal isolation
29+
30+
## Key Features
31+
32+
* **GP8403:**
33+
- GP8403 uses I2C interface to linearly convert two analog voltage outputs of 0-5V or 0-10V.
34+
- Input signal range 12Bit, 0x000-0xFFF
35+
- 0-5V/0-10V output voltage is controlled by internal data
36+
- Input I2C signal high level: 2.7V-5.5V
37+
- Output voltage error: < 0.5% (can reach 0.1% TPY after two-point calibration)
38+
- Output voltage linearity error: 0.1% (TPY)
39+
- Output short circuit protection, when the output pin is short-circuited to ground, the chip enters protection mode and stops output.
40+
- Power supply voltage: 9V-36V
41+
- Power consumption: < 5mA
42+
- Start-up time: < 2ms
43+
- Operating temperature: -40°C to 85°C
44+
45+
* **EEPROM:**
46+
- 64 Kbit (8 Kbyte) of EEPROM
47+
- Page size: 32 byte
48+
- Write protect of the whole memory array
49+
- Enhanced ESD/Latch-Up protection
50+
- More than 4 million Write cycles
51+
- More than 200-years data retention
52+
53+
* **Connectivity:**
54+
- Two 4Pin SH1.0 Connectors(IIC)
55+
- 6Pin 2.54mm Header Holes (IIC + 2 x NC)
56+
- Output by 4 x 3.81mm Screw terminal block
57+
58+
59+
## Packing List
60+
61+
|Part |Quantity |
62+
|-------------------------------|---------|
63+
|FoBE Breakout GP8403 board |1 |
64+
|SH1.0mm 4 Pin Connector Plug Male with 100mm Wire |2 |

‎docs/product/f2210/quickstart.mdx‎

Lines changed: 81 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -3,6 +3,84 @@ title: Quick Start
33
sidebar_label: Quick Start
44
---
55

6-
:::warning
7-
This page is under construction.
8-
:::
6+
This guide introduces the FoBE Breakout GP8303 and how to use it.
7+
8+
## Hardware diagram
9+
10+
The following figure illustrates the FoBE Breakout GP8303 hardware diagram.
11+
12+
<br/>
13+
<div style={{ textAlign: 'center' }}>
14+
<img src="/img/products/f2210-1a.digram.png" alt="FoBE Breakout GP8303 Hardware Diagram" style={{ width: '80%', height: 'auto' }} />
15+
</div>
16+
<br/>
17+
18+
## Mechanical dimensions
19+
20+
FoBE Breakout GP8303 is a single-sided 25.4mm x 50.81mm (1" x 2") 1.6mm thick PCB with two SH1.0 4-pin connectors and a set of 6-pin 2.54mm header holes.
21+
22+
Output is provided by 4 x 3.81mm screw terminal blocks.
23+
24+
Fixing by 4(or more, up to 8) x 1.6mm Screw holes.
25+
26+
<br/>
27+
<div style={{ textAlign: 'center' }}>
28+
<img src="/img/products/f2210-1a.dimensions.png" alt="FoBE Breakout GP8303 Mechanical Dimensions" style={{ width: '80%', height: 'auto' }} />
29+
</div>
30+
<br/>
31+
32+
## Interfaces
33+
34+
The board provides two 4-pin SH1.0 connectors, all providing the same IIC connections for MCU control.
35+
36+
|Interface |Description |
37+
|-------------------------------|---------|
38+
|GND |Ground |
39+
|3V3 |Power supply |
40+
|SDA |I2C bus data line |
41+
|SCL |I2C bus clock line |
42+
43+
And a set of 6-pin 2.54mm header holes, providing the same IIC connections for MCU control, plus an interrupt pin.
44+
45+
|Interface |Description |
46+
|-------------------------------|---------|
47+
|NC | Not Connected |
48+
|GND |Ground |
49+
|3V3 |Power supply |
50+
|SDA |I2C bus data line |
51+
|SCL |I2C bus clock line |
52+
|NC | Not Connected |
53+
54+
The board also provides 4 x 3.81mm screw terminal blocks for output.
55+
|Interface |Description |
56+
|-------------------------------|---------|
57+
|VIN |Power supply: 9V-36V |
58+
|GND |Ground |
59+
|CH1 |Output channel 1, 0-5V/0-10V |
60+
|CH0 |Output channel 2, 0-5V/0-10V |
61+
62+
## Configuration Jumper
63+
64+
The board features six jumper pad:
65+
66+
|JUMPER|Interface |Description |
67+
|--------|-------------------------------|---------|
68+
|A0/A1/A2(Close to GP8303)|GP8303-ADDR|Address byte: [7:4] 1 0 1 1, [3:1] A2-A1-A0, 0|
69+
|A0/A1/A2(Close to EEPROM)|EEPROM-ADDR| Address byte: [7:4] 1-0-1-0, [3:1] A2-A1-A0, [0] 0(W)/1(R)|
70+
71+
## Programming
72+
73+
### FoBE Quill nRF52840 Mesh Example
74+
The FoBE Quill nRF52840 Mesh development board provides multiple digital gpio; pins D2, D1, D0 are used in the example:
75+
76+
<br/>
77+
<div style={{ textAlign: 'center' }}>
78+
<img src="/img/products/f2210-1a.connection.png" alt="FoBE Breakout GP8403 Mechanical connection" style={{ width: '80%', height: 'auto' }} />
79+
</div>
80+
<br/>
81+
82+
```C++
83+
#include <TinyGPSPlus.h>
84+
#include <SoftwareSerial.h>
85+
......
86+
```

‎docs/product/f2210/resources.mdx‎

Lines changed: 12 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -2,6 +2,15 @@
22
title: Resources
33
---
44

5-
:::warning
6-
This page is under construction.
7-
:::
5+
**\[PDF\]** [FoBE Breakout GP8403 Datasheet](/)
6+
7+
**\[PDF\]** [FoBE Breakout GP8403 Schematic](/)
8+
9+
**\[PDF\]** [FoBE Breakout GP8403 Dimension](/)
10+
11+
**\[DXF\]** [FoBE Breakout GP8403 Dimension](/)
12+
13+
**\[STL\]** [FoBE Breakout GP8403 3D Model](/)
14+
15+
**\[IC\]** [GP8403](https://atta.szlcsc.com/upload/public/pdf/source/20230324/119C3D24177D38ACF0484191557FF3D8.pdf)
16+

‎sidebars.js‎

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -205,7 +205,7 @@ module.exports = {
205205
},
206206
{
207207
type: "category",
208-
label: "Breakout GP8403 (X)",
208+
label: "Breakout GP8403",
209209
link: { type: "doc", id: "product/f2210/index" },
210210
items: ["product/f2210/quickstart", "product/f2210/resources"],
211211
},

‎static/img/products/f2210-1a.digram.png‎

-39 Bytes
Loading

0 commit comments

Comments
 (0)