Replies: 7 comments
-
|
The Z product range are Zigbee lights you could use https://www.zigbee2mqtt.io/supported-devices/#v=EGLO,Eglo,AwoX with a Zigbee controller |
Beta Was this translation helpful? Give feedback.
-
|
These support both BT and Zigbee. I have tried to control them with home assistant and zigbee and it works but with that it disables usage of BT mesh and I loose control over them with my Eglo BT remote. So I would like to control them from Home assistant with Bt. I can continue investigating it myself if you give some direction where to look and what looks inorrect. |
Beta Was this translation helpful? Give feedback.
-
|
Are you sure they support the same ble mesh? If I remember correctly from previous research it's a different protocol |
Beta Was this translation helpful? Give feedback.
-
|
My understanding is that it supports both zigbee and bt mesh. I can control it with my phone and in the application it mentiones mesh. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, not sure if this is related but I can see following GATT related traces which might be related. ^[[0;33m[W][esp32_ble_client:215]: [0] [A4:C1:38:B9:23:95] esp_ble_gattc_get_descr_by_char_handle error, status=10^[[0m I think 00010203-0405-0607-0809-0A0B0C0D1915 is not defined in mesh_device.h |
Beta Was this translation helpful? Give feedback.
-
|
Okay, did some more reading looks like the Z products use Zigbee direct (https://csa-iot.org/wp-content/uploads/2022/12/20-27688-037-zigbee_direct_spec.pdf). That's a different protocol as telink that's used in this esphome component. Looks like more vendors use this like MOES and IKEA (see for instance Koenkk/zigbee2mqtt#18335). So I think it should be possible to use the devices over Zigbee and link your remote. Or are you using a BLE mesh remote? |
Beta Was this translation helpful? Give feedback.
-
|
Ok, you might be right. I can add lights directly to home assistant with ZHA but I have found it more unreliable and slower than controlling them with Eglo remote (zigbee) or Phone (BLE). |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
I have many Fueva-Z lights ( https://www.eglo.com/uk/recessed-light-fueva-z-900102.html )
Not sure if this is a bug or just me but I can't list lights on MQTT/home assistant. I obtained my mesh name and password with https://jsfiddle.net/fsaris/uncm54vb/37/ only difference being that I chaged URL to https://l4hparse-hc-prod.awox.cloud/parse/login as I am using Awox Home Conrol app instead of Awox smart conrol. Some log attached below. For some reason it shows my mesh network name instead of proper name.
V][AwoxMesh:044]: Found Awox device <MESH_NAME> - A4:C1:38:0A:AC:EF. RSSI: -88 dB (total devices: 16)
[VV][scheduler:226]: Running timeout 'connecting' with interval=20000 last_execution=20292 (now=40303)
[I][AwoxMesh:071]: Failed to connect A4:C1:38:95:D5:82 => rssi: -55
[I][esp32_ble_client:081]: [0] [A4:C1:38:95:D5:82] Disconnecting.
[I][MeshDevice:155]: DISCONNECTING
[I][mesh_device:475]: Publish connected to mesh device - offline
[D][AwoxMesh:057]: Total devices: 16
[D][AwoxMesh:059]: Available device A4:C1:38:B1:9A:DF => rssi: -59
[D][AwoxMesh:059]: Available device A4:C1:38:95:D5:82 => rssi: -59
[D][AwoxMesh:059]: Available device A4:C1:38:0E:6C:75 => rssi: -59
[D][AwoxMesh:059]: Available device A4:C1:38:FF:E1:D2 => rssi: -59
[D][AwoxMesh:059]: Available device A4:C1:38:56:C1:55 => rssi: -60
[D][AwoxMesh:059]: Available device A4:C1:38:A8:81:49 => rssi: -61
[D][AwoxMesh:059]: Available device A4:C1:38:CC:2F:5F => rssi: -61
[D][AwoxMesh:059]: Available device A4:C1:38:F7:C3:75 => rssi: -63
[D][AwoxMesh:059]: Available device A4:C1:38:B9:23:95 => rssi: -67
[D][AwoxMesh:059]: Available device A4:C1:38:4A:8A:DD => rssi: -68
[D][AwoxMesh:059]: Available device A4:C1:38:97:7B:2E => rssi: -68
[D][AwoxMesh:059]: Available device A4:C1:38:92:4D:15 => rssi: -69
[D][AwoxMesh:059]: Available device A4:C1:38:A1:D8:A0 => rssi: -71
[D][AwoxMesh:059]: Available device A4:C1:38:29:69:37 => rssi: -77
[D][AwoxMesh:059]: Available device A4:C1:38:4A:4F:7B => rssi: -79
[D][AwoxMesh:059]: Available device A4:C1:38:0A:AC:EF => rssi: -88
[I][AwoxMesh:063]: Try to connect A4:C1:38:B1:9A:DF => rssi: -59
[I][mesh_device:475]: Publish connected to mesh device - offline
[I][esp32_ble_client:064]: [0] [A4:C1:38:B1:9A:DF] 0x00 Attempting BLE connection
[I][MeshDevice:175]: CONNECTING
[VV][scheduler:032]: set_timeout(name='connecting', timeout=20000)
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: A4:C1:38:4A:4F:7B (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -87
[VV][esp32_ble_tracker:415]: Name: '<MESH_NAME>'
[VV][esp32_ble_tracker:423]: Ad Flag: 5
[VV][esp32_ble_tracker:426]: Service UUID: 0x1800
[VV][esp32_ble_tracker:429]: Manufacturer data: 35.10.7B.4F.4A.38 (6)
[VV][esp32_ble_tracker:445]: Adv data: 02.01.05.03.02.00.18.09.09.69.52.74.55.42.58.4C.41.09.FF.60.01.35.10.7B.4F.4A.38 (27)
[V][AwoxMesh:044]: Found Awox device <MESH_NAME> - A4:C1:38:4A:4F:7B. RSSI: -87 dB (total devices: 16)
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: 54:15:89:A8:84:60 (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -70
[VV][esp32_ble_tracker:415]: Name: ''
[VV][esp32_ble_tracker:423]: Ad Flag: 24
[VV][esp32_ble_tracker:429]: Manufacturer data: 62.20.01.D3.E4.00.00.28.00.00.00.54.15.89.A8.84.60.00.00.00.00.00.00.00 (24)
[VV][esp32_ble_tracker:445]: Adv data: 02.01.18.1B.FF.CB.0E.62.20.01.D3.E4.00.00.28.00.00.00.54.15.89.A8.84.60.00.00.00.00.00.00.00 (31)
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: A4:C1:38:4A:4F:7B (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -81
[VV][esp32_ble_tracker:415]: Name: '<MESH_NAME>'
[VV][esp32_ble_tracker:423]: Ad Flag: 5
[VV][esp32_ble_tracker:426]: Service UUID: 0x1800
[VV][esp32_ble_tracker:429]: Manufacturer data: 35.10.7B.4F.4A.38 (6)
[VV][esp32_ble_tracker:445]: Adv data: 02.01.05.03.02.00.18.09.09.69.52.74.55.42.58.4C.41.09.FF.60.01.35.10.7B.4F.4A.38 (27)
[V][AwoxMesh:044]: Found Awox device <MESH_NAME> - A4:C1:38:4A:4F:7B. RSSI: -81 dB (total devices: 16)
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: 58:2B:DB:6B:B8:A6 (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -92
[VV][esp32_ble_tracker:415]: Name: 'PAX Calima'
[VV][esp32_ble_tracker:417]: TX Power: 2
[VV][esp32_ble_tracker:423]: Ad Flag: 6
[VV][esp32_ble_tracker:426]: Service UUID: 0x180A
[VV][esp32_ble_tracker:445]: Adv data: 02.01.06.03.03.0A.18.0B.09.50.41.58.20.43.61.6C.69.6D.61.02.0A.03 (22)
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: A4:C1:38:A8:81:49 (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -60
[VV][esp32_ble_tracker:415]: Name: '<MESH_NAME>'
[VV][esp32_ble_tracker:423]: Ad Flag: 5
[VV][esp32_ble_tracker:426]: Service UUID: 0x1800
[VV][esp32_ble_tracker:429]: Manufacturer data: 97.20.49.81.A8.38 (6)
[VV][esp32_ble_tracker:445]: Adv data: 02.01.05.03.02.00.18.09.09.69.52.74.55.42.58.4C.41.09.FF.60.01.97.20.49.81.A8.38 (27)
[V][AwoxMesh:044]: Found Awox device <MESH_NAME> - A4:C1:38:A8:81:49. RSSI: -60 dB (total devices: 16)
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: A4:C1:38:A8:81:49 (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -64
[VV][esp32_ble_tracker:415]: Name: '<MESH_NAME>'
[VV][esp32_ble_tracker:423]: Ad Flag: 5
[VV][esp32_ble_tracker:426]: Service UUID: 0x1800
[VV][esp32_ble_tracker:429]: Manufacturer data: 97.20.49.81.A8.38 (6)
[VV][esp32_ble_tracker:445]: Adv data: 02.01.05.03.02.00.18.09.09.69.52.74.55.42.58.4C.41.09.FF.60.01.97.20.49.81.A8.38 (27)
[V][AwoxMesh:044]: Found Awox device <MESH_NAME> - A4:C1:38:A8:81:49. RSSI: -64 dB (total devices: 16)
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: A4:C1:38:4A:4F:7B (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -79
[VV][esp32_ble_tracker:415]: Name: '<MESH_NAME>'
[VV][esp32_ble_tracker:423]: Ad Flag: 5
[VV][esp32_ble_tracker:426]: Service UUID: 0x1800
[VV][esp32_ble_tracker:429]: Manufacturer data: 35.10.7B.4F.4A.38 (6)
[VV][esp32_ble_tracker:445]: Adv data: 02.01.05.03.02.00.18.09.09.69.52.74.55.42.58.4C.41.09.FF.60.01.35.10.7B.4F.4A.38 (27)
[V][AwoxMesh:044]: Found Awox device <MESH_NAME> - A4:C1:38:4A:4F:7B. RSSI: -79 dB (total devices: 16)
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: A4:C1:38:4A:8A:DD (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -73
[VV][esp32_ble_tracker:415]: Name: '<MESH_NAME>'
[VV][esp32_ble_tracker:423]: Ad Flag: 5
[VV][esp32_ble_tracker:426]: Service UUID: 0x1800
[VV][esp32_ble_tracker:429]: Manufacturer data: 97.20.DD.8A.4A.38 (6)
[VV][esp32_ble_tracker:445]: Adv data: 02.01.05.03.02.00.18.09.09.69.52.74.55.42.58.4C.41.09.FF.60.01.97.20.DD.8A.4A.38 (27)
[V][AwoxMesh:044]: Found Awox device <MESH_NAME> - A4:C1:38:4A:8A:DD. RSSI: -73 dB (total devices: 16)
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: A4:C1:38:29:69:37 (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -72
[VV][esp32_ble_tracker:415]: Name: '<MESH_NAME>'
[VV][esp32_ble_tracker:423]: Ad Flag: 5
[VV][esp32_ble_tracker:426]: Service UUID: 0x1800
[VV][esp32_ble_tracker:429]: Manufacturer data: 97.20.37.69.29.38 (6)
[VV][esp32_ble_tracker:445]: Adv data: 02.01.05.03.02.00.18.09.09.69.52.74.55.42.58.4C.41.09.FF.60.01.97.20.37.69.29.38 (27)
[V][AwoxMesh:044]: Found Awox device <MESH_NAME> - A4:C1:38:29:69:37. RSSI: -72 dB (total devices: 16)
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: 80:64:6F:E4:6A:4E (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -84
[VV][esp32_ble_tracker:415]: Name: ''
[VV][esp32_ble_tracker:423]: Ad Flag: 6
[VV][esp32_ble_tracker:429]: Manufacturer data: 01.05.00.0B.01.10.0A.80.64.6F.E4.6A.4C (13)
[VV][esp32_ble_tracker:445]: Adv data: 02.01.06.10.FF.A9.0B.01.05.00.0B.01.10.0A.80.64.6F.E4.6A.4C (20)
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[VV][esp32_ble_tracker:395]: Parse Result:
[VV][esp32_ble_tracker:412]: Address: A4:C1:38:29:69:37 (PUBLIC)
[VV][esp32_ble_tracker:414]: RSSI: -73
[VV][esp32_ble_tracker:415]: Name: '<MESH_NAME>'
[VV][esp32_ble_tracker:423]: Ad Flag: 5
[VV][esp32_ble_tracker:426]: Service UUID: 0x1800
[VV][esp32_ble_tracker:429]: Manufacturer data: 97.20.37.69.29.38 (6)
[VV][esp32_ble_tracker:445]: Adv data: 02.01.05.03.02.00.18.09.09.69.52.74.55.42.58.4C.41.09.FF.60.01.97.20.37.69.29.38 (27)
[V][AwoxMesh:044]: Found Awox device <MESH_NAME> - A4:C1:38:29:69:37. RSSI: -73 dB (total devices: 16)
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
[V][esp32_ble:178]: (BLE) gap_event_handler - 3
Beta Was this translation helpful? Give feedback.
All reactions