MMDVMHost.ini

[General]
Callsign=G9BF
Id=123456
Timeout=180
Duplex=1
# ModeHang=10
RFModeHang=10
NetModeHang=3
Daemon=0

[Info]
RXFrequency=435000000
TXFrequency=435000000
Power=1
# The following lines are only needed if a direct connection to a DMR master is being used
Latitude=0.0
Longitude=0.0
Height=0
Location=Nowhere
Description=Multi-Mode Repeater
URL=www.google.co.uk

[Log]
# Logging levels, 0=No logging
MQTTLevel=1
DisplayLevel=1

[MQTT]
Host=127.0.0.1
Port=1883
Auth=0
Username=mmdvm
Password=mmdvm
Keepalive=60
Name=mmdvm

[CW Id]
Enable=1
Time=10
# Callsign=

[DMR Id Lookup]
File=DMRIds.dat
Time=24

[NXDN Id Lookup]
File=NXDN.csv
Time=24

[Modem]
# Valid values are "null", "uart", "udp", and (on Linux) "i2c"
Protocol=null
# The port and speed used for a UART connection
UARTPort=\\.\COM11
# UARTPort=/dev/ttyACM0
# UARTPort=/dev/ttyAMA0
UARTSpeed=115200
# The port and address for an I2C connection
I2CPort=/dev/i2c
I2CAddress=0x22
# IP parameters for UDP connection
ModemAddress=192.168.2.100
ModemPort=3334
LocalAddress=192.168.2.1
LocalPort=3335

TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
RXOffset=0
TXOffset=0
DMRDelay=0
RXLevel=50
TXLevel=50
RXDCOffset=0
TXDCOffset=0
RFLevel=100
# CWIdTXLevel=50
# D-StarTXLevel=50
# DMRTXLevel=50
# YSFTXLevel=50
# P25TXLevel=50
# NXDNTXLevel=50
# POCSAGTXLevel=50
# FMTXLevel=50
RSSIMappingFile=RSSI.dat
UseCOSAsLockout=0
Trace=0
Debug=0

[Transparent Data]
Enable=0
RemoteAddress=127.0.0.1
RemotePort=40094
LocalPort=40095
# SendFrameType=0

[D-Star]
Enable=0
Module=C
SelfOnly=0
AckReply=1
AckTime=750
AckMessage=0
ErrorReply=1
RemoteGateway=0
# ModeHang=10
WhiteList=

[DMR]
Enable=1
Beacons=0
BeaconInterval=60
BeaconDuration=3
ColorCode=1
SelfOnly=0
EmbeddedLCOnly=0
DumpTAData=1
# Prefixes=234,235
# Slot1TGWhiteList=
# Slot2TGWhiteList=
CallHang=3
TXHang=4
# ModeHang=10
# OVCM Values, 0=off, 1=rx_on, 2=tx_on, 3=both_on, 4=force off
# OVCM=0

[System Fusion]
Enable=0
LowDeviation=0
SelfOnly=0
TXHang=4
RemoteGateway=0
# ModeHang=10

[P25]
Enable=0
NAC=293
SelfOnly=0
OverrideUIDCheck=0
RemoteGateway=0
TXHang=5
# ModeHang=10

[NXDN]
Enable=0
RAN=1
SelfOnly=0
RemoteGateway=0
TXHang=5
# ModeHang=10

[POCSAG]
Enable=1
Frequency=439987500

[FM]
Enable=1
# Callsign=G4KLX
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=1
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
AckFrequency=1750
AckMinTime=4
AckDelay=1000
AckLevel=50
# Timeout=180
TimeoutLevel=80
CTCSSFrequency=88.4
CTCSSThreshold=30
# CTCSSHighThreshold=30
# CTCSSLowThreshold=20
CTCSSLevel=20
KerchunkTime=0
HangTime=7
# AccessMode values are:
#   0 - Carrier access with COS
#   1 - CTCSS only access without COS
#   2 - CTCSS only access with COS
#   3 - CTCSS only access with COS to start, then carrier access with COS
AccessMode=1
# LinkMode=1 to remove almost all of the logic control
LinkMode=0
COSInvert=0
NoiseSquelch=0
SquelchThreshold=30
# SquelchHighThreshold=30
# SquelchLowThreshold=20
RFAudioBoost=1
MaxDevLevel=90
ExtAudioBoost=1
# ModeHang=10

[D-Star Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=20011
GatewayAddress=127.0.0.1
GatewayPort=20010
# ModeHang=3
Debug=0

[DMR Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=62032
GatewayAddress=127.0.0.1
GatewayPort=62031
Jitter=360
Slot1=1
Slot2=1
# ModeHang=3
Debug=0

[System Fusion Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=4200
# ModeHang=3
Debug=0

[P25 Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=32010
GatewayAddress=127.0.0.1
GatewayPort=42020
# ModeHang=3
Debug=0

[NXDN Network]
Enable=0
Protocol=Icom
LocalAddress=127.0.0.1
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
# ModeHang=3
Debug=0

[POCSAG Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3800
GatewayAddress=127.0.0.1
GatewayPort=4800
# ModeHang=3
Debug=0

[FM Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=3810
GatewayAddress=127.0.0.1
GatewayPort=4810
PreEmphasis=1
DeEmphasis=1
TXAudioGain=1.0
RXAudioGain=1.0
# ModeHang=3
Debug=0

[Lock File]
Enable=0
File=/tmp/MMDVM_Active.lck

[Remote Control]
Enable=0