x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits

commit 258f3b8 upstream.

tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and
CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use
MSR_IA32_TSX_CTRL when supported.

  [ bp: Document how and why TSX gets disabled. ]

Fixes: 2936493 ("x86/tsx: Clear CPUID bits when TSX always force aborts")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Pawan Gupta <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Neelima Krishnan <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: pa1gupta

arch/x86/kernel/cpu/intel.c

@@ -722,6 +722,7 @@ static void init_intel(struct cpuinfo_x86 *c)
 	else if (tsx_ctrl_state == TSX_CTRL_DISABLE)
 		tsx_disable();
 	else if (tsx_ctrl_state == TSX_CTRL_RTM_ALWAYS_ABORT)
+		/* See comment over that function for more details. */
 		tsx_clear_cpuid();
 
 	split_lock_init();

arch/x86/kernel/cpu/tsx.c

@@ -58,7 +58,7 @@ void tsx_enable(void)
 	wrmsrl(MSR_IA32_TSX_CTRL, tsx);
 }
 
-static bool __init tsx_ctrl_is_supported(void)
+static bool tsx_ctrl_is_supported(void)
 {
 	u64 ia32_cap = x86_read_arch_cap_msr();
 
@@ -84,6 +84,44 @@ static enum tsx_ctrl_states x86_get_tsx_auto_mode(void)
 	return TSX_CTRL_ENABLE;
 }
 
+/*
+ * Disabling TSX is not a trivial business.
+ *
+ * First of all, there's a CPUID bit: X86_FEATURE_RTM_ALWAYS_ABORT
+ * which says that TSX is practically disabled (all transactions are
+ * aborted by default). When that bit is set, the kernel unconditionally
+ * disables TSX.
+ *
+ * In order to do that, however, it needs to dance a bit:
+ *
+ * 1. The first method to disable it is through MSR_TSX_FORCE_ABORT and
+ * the MSR is present only when *two* CPUID bits are set:
+ *
+ * - X86_FEATURE_RTM_ALWAYS_ABORT
+ * - X86_FEATURE_TSX_FORCE_ABORT
+ *
+ * 2. The second method is for CPUs which do not have the above-mentioned
+ * MSR: those use a different MSR - MSR_IA32_TSX_CTRL and disable TSX
+ * through that one. Those CPUs can also have the initially mentioned
+ * CPUID bit X86_FEATURE_RTM_ALWAYS_ABORT set and for those the same strategy
+ * applies: TSX gets disabled unconditionally.
+ *
+ * When either of the two methods are present, the kernel disables TSX and
+ * clears the respective RTM and HLE feature flags.
+ *
+ * An additional twist in the whole thing presents late microcode loading
+ * which, when done, may cause for the X86_FEATURE_RTM_ALWAYS_ABORT CPUID
+ * bit to be set after the update.
+ *
+ * A subsequent hotplug operation on any logical CPU except the BSP will
+ * cause for the supported CPUID feature bits to get re-detected and, if
+ * RTM and HLE get cleared all of a sudden, but, userspace did consult
+ * them before the update, then funny explosions will happen. Long story
+ * short: the kernel doesn't modify CPUID feature bits after booting.
+ *
+ * That's why, this function's call in init_intel() doesn't clear the
+ * feature flags.
+ */
 void tsx_clear_cpuid(void)
 {
 	u64 msr;
@@ -97,6 +135,10 @@ void tsx_clear_cpuid(void)
 		rdmsrl(MSR_TSX_FORCE_ABORT, msr);
 		msr |= MSR_TFA_TSX_CPUID_CLEAR;
 		wrmsrl(MSR_TSX_FORCE_ABORT, msr);
+	} else if (tsx_ctrl_is_supported()) {
+		rdmsrl(MSR_IA32_TSX_CTRL, msr);
+		msr |= TSX_CTRL_CPUID_CLEAR;
+		wrmsrl(MSR_IA32_TSX_CTRL, msr);
 	}
 }
 
@@ -106,13 +148,11 @@ void __init tsx_init(void)
 	int ret;
 
 	/*
-	 * Hardware will always abort a TSX transaction if both CPUID bits
-	 * RTM_ALWAYS_ABORT and TSX_FORCE_ABORT are set. In this case, it is
-	 * better not to enumerate CPUID.RTM and CPUID.HLE bits. Clear them
-	 * here.
+	 * Hardware will always abort a TSX transaction when the CPUID bit
+	 * RTM_ALWAYS_ABORT is set. In this case, it is better not to enumerate
+	 * CPUID.RTM and CPUID.HLE bits. Clear them here.
 	 */
-	if (boot_cpu_has(X86_FEATURE_RTM_ALWAYS_ABORT) &&
-	    boot_cpu_has(X86_FEATURE_TSX_FORCE_ABORT)) {
+	if (boot_cpu_has(X86_FEATURE_RTM_ALWAYS_ABORT)) {
 		tsx_ctrl_state = TSX_CTRL_RTM_ALWAYS_ABORT;
 		tsx_clear_cpuid();
 		setup_clear_cpu_cap(X86_FEATURE_RTM);