CUDA: use async data loading for FlashAttention (#11894)

* CUDA: use async data loading for FlashAttention

---------

Co-authored-by: Diego Devesa <[email protected]>

Author: JohannesGaessler

ggml/src/ggml-cuda/common.cuh

@@ -41,12 +41,13 @@
 #define CUDART_HMAX   11070 // CUDA 11.7, min. ver. for which __hmax and __hmax2 are known to work (may be higher than needed)
 #define CUDART_HMASK  12000 // CUDA 12.0, min. ver. for half2 -> uint mask comparisons
 
-#define GGML_CUDA_CC_PASCAL     600
-#define GGML_CUDA_CC_DP4A       610 // minimum compute capability for __dp4a, an intrinsic for byte-wise dot products
-#define GGML_CUDA_CC_VOLTA      700
-#define GGML_CUDA_CC_TURING     750
-#define GGML_CUDA_CC_AMPERE     800
-#define GGML_CUDA_CC_OFFSET_AMD 0x1000000
+#define GGML_CUDA_CC_PASCAL       600
+#define GGML_CUDA_CC_DP4A         610 // minimum compute capability for __dp4a, an intrinsic for byte-wise dot products
+#define GGML_CUDA_CC_VOLTA        700
+#define GGML_CUDA_CC_TURING       750
+#define GGML_CUDA_CC_AMPERE       800
+#define GGML_CUDA_CC_ADA_LOVELACE 890
+#define GGML_CUDA_CC_OFFSET_AMD   0x1000000
 
 // GCN/CNDA, wave size is 64
 #define GGML_CUDA_CC_GCN4       (GGML_CUDA_CC_OFFSET_AMD + 0x803)  // Tonga, Fiji, Polaris, minimum for fast fp16
@@ -199,6 +200,10 @@ typedef float2 dfloat2;
 #define NEW_MMA_AVAILABLE
 #endif // !(defined(GGML_USE_HIP) && defined(__HIP_PLATFORM_AMD__)) && __CUDA_ARCH__ >= GGML_CUDA_CC_TURING
 
+#if !(defined(GGML_USE_HIP) && defined(__HIP_PLATFORM_AMD__)) && __CUDA_ARCH__ >= GGML_CUDA_CC_AMPERE
+#define CP_ASYNC_AVAILABLE
+#endif // !(defined(GGML_USE_HIP) && defined(__HIP_PLATFORM_AMD__)) && __CUDA_ARCH__ >= GGML_CUDA_CC_AMPERE
+
 #if !(defined(GGML_USE_MUSA) && __MUSA_ARCH__ <= GGML_CUDA_CC_QY1)
 #define FLASH_ATTN_AVAILABLE
 #endif // !(defined(GGML_USE_MUSA) && __MUSA_ARCH__ <= GGML_CUDA_CC_QY1)
@@ -231,6 +236,10 @@ static bool new_mma_available(const int cc) {
     return cc < GGML_CUDA_CC_OFFSET_AMD && ggml_cuda_highest_compiled_arch(cc) >= GGML_CUDA_CC_TURING;
 }
 
+static bool cp_async_available(const int cc) {
+    return cc < GGML_CUDA_CC_OFFSET_AMD && ggml_cuda_highest_compiled_arch(cc) >= GGML_CUDA_CC_AMPERE;
+}
+
 static constexpr __device__ int ggml_cuda_get_physical_warp_size() {
 #if defined(GGML_USE_HIP) && defined(__HIP_PLATFORM_AMD__)
     return __AMDGCN_WAVEFRONT_SIZE;

ggml/src/ggml-cuda/cp-async.cuh

@@ -0,0 +1,46 @@
+// Simplified API for asynchronous data loading.
+
+#include "common.cuh"
+
+// Copies data from global to shared memory, cg == cache global.
+// Both the src and dst pointers must be aligned to 16 bit.
+// Shared memory uses 32 bit addressing, the pointer is passed as unsigned int.
+// Generic pointers can be converted to 32 bit shared memory pointers using __cvta_generic_to_shared.
+// Only the 16 bit copy is exposed because 4 and 8 bit copies did not yield performance improvements.
+template <int preload>
+static __device__ __forceinline__ void cp_async_cg_16(const unsigned int dst, const void * src) {
+    static_assert(preload == 0 || preload == 64 || preload == 128 || preload == 256, "bad preload");
+#ifdef CP_ASYNC_AVAILABLE
+#if CUDART_VERSION >= 11040
+    if (preload == 256) {
+        asm volatile("cp.async.cg.shared.global.L2::256B [%0], [%1], 16;"
+            : : "r"(dst), "l"(src));
+    } else if (preload == 128) {
+        asm volatile("cp.async.cg.shared.global.L2::128B [%0], [%1], 16;"
+            : : "r"(dst), "l"(src));
+    } else if (preload == 64) {
+        asm volatile("cp.async.cg.shared.global.L2::64B [%0], [%1], 16;"
+            : : "r"(dst), "l"(src));
+    } else
+#endif // CUDART_VERSION >= 11040
+    {
+        asm volatile("cp.async.cg.shared.global.L2 [%0], [%1], 16;"
+            : : "r"(dst), "l"(src));
+    }
+#else
+    GGML_UNUSED(dst);
+    GGML_UNUSED(src);
+    NO_DEVICE_CODE;
+#endif // CP_ASYNC_AVAILABLE
+}
+
+// Makes each thread wait until its asynchronous data copies are done.
+// This does NOT provide any additional synchronization.
+// In particular, when copying data with multiple warps a call to __syncthreads will be needed.
+static __device__ __forceinline__ void cp_async_wait_all() {
+#ifdef CP_ASYNC_AVAILABLE
+    asm volatile("cp.async.wait_all;");
+#else
+    NO_DEVICE_CODE;
+#endif // CP_ASYNC_AVAILABLE
+}

ggml/src/ggml-cuda/fattn-common.cuh

@@ -716,7 +716,9 @@ void launch_fattn(
 
     ggml_cuda_pool & pool = ctx.pool();
     cudaStream_t main_stream = ctx.stream();
-    const int nsm = ggml_cuda_info().devices[ggml_cuda_get_device()].nsm;
+    const int id  = ggml_cuda_get_device();
+    const int cc  = ggml_cuda_info().devices[id].cc;
+    const int nsm = ggml_cuda_info().devices[id].nsm;
 
     ggml_cuda_pool_alloc<half>   K_f16(pool);
     ggml_cuda_pool_alloc<half>   V_f16(pool);
@@ -768,13 +770,14 @@ void launch_fattn(
     dim3 blocks_num;
     if (parallel_blocks == 0) {
         // For short contexts it can be faster to have the SMs work on whole tiles because this lets us skip the fixup.
-        const int tiles_nwaves  = (ntiles_total - nsm - 1) / nsm;
-        const bool tiles_inefficient = 3*nsm < 2*tiles_nwaves*ntiles_total;
-        const bool short_context = K->ne[1] < 4096;
+        const int tiles_nwaves  = (ntiles_total + 2*nsm - 1) / (2*nsm);
+        const int tiles_efficiency_percent = 100 * ntiles_total / (2*nsm*tiles_nwaves);
 
         const int nblocks_stream_k = 2*nsm;
 
-        blocks_num.x = short_context && !tiles_inefficient ? ntiles_total : nblocks_stream_k;
+        const bool use_stream_k = tiles_efficiency_percent < 75 || cc >= GGML_CUDA_CC_ADA_LOVELACE;
+
+        blocks_num.x = use_stream_k ? nblocks_stream_k : ntiles_total;
         blocks_num.y = 1;
         blocks_num.z = 1;
 
@@ -827,7 +830,7 @@ void launch_fattn(
     CUDA_CHECK(cudaGetLastError());
 
     if constexpr (parallel_blocks == 0) {
-        if (blocks_num.x % ntiles_total != 0) { // Fixup is only needed if the SMs work on fractional tiles.
+        if (ntiles_total % blocks_num.x != 0) { // Fixup is only needed if the SMs work on fractional tiles.
             const dim3 block_dim_combine(D, 1, 1);
             const dim3 blocks_num_combine = blocks_num;