[Idea] Support for ssacli, hpssacli and hpacucli for Storage Inventory

[Megachip]

Your idea

Would be nice, if we could use this output for more detailled hardwareinventory (than LOGICAL VOLUME HP)

Will post some outputs by time so we can think if this is usefull or not.

[Megachip]

/opt/smartstorageadmin/ssacli/bin/ssacli ctrl slot=0 pd all show detail

Smart Array P410i in Slot 0 (Embedded)

   Array A

      physicaldrive 1I:1:1
         Port: 1I
         Box: 1
         Bay: 1
         Status: OK
         Drive Type: Data Drive
         Interface Type: SAS
         Size: 300 GB
         Drive exposed to OS: False
         Logical/Physical Block Size: 512/512
         Rotational Speed: 10000
         Firmware Revision: HPD6
         Serial Number: xxx
         WWID: xxx
         Model: HP      EG0300FBDBR
         Current Temperature (C): 28
         Maximum Temperature (C): 40
         PHY Count: 2
         PHY Transfer Rate: 6.0Gbps, Unknown
         Sanitize Erase Supported: False
         Shingled Magnetic Recording Support: None

/opt/hp/hpssacli/bin/hpssacli ctrl slot=0 pd all show detail

Dynamic Smart Array B320i RAID in Slot 0 (Embedded)

   array A

      physicaldrive 1I:1:1
         Port: 1I
         Box: 1
         Bay: 1
         Status: OK
         Drive Type: Data Drive
         Interface Type: SAS
         Size: 300 GB
         Native Block Size: 512
         Rotational Speed: 10000
         Firmware Revision: HPDC
         Serial Number:         xxx
         Model: HP      EG0300FBVFL
         Current Temperature (C): 39
         Maximum Temperature (C): 45
         PHY Count: 2
         PHY Transfer Rate: 6.0Gbps, Unknown
         Drive Authentication Status: OK
         Carrier Application Version: 11
         Carrier Bootloader Version: 6