Merge branch 'main' into issue-27847

Author: dek5troza

.github/workflows/disk-clean.yml

@@ -8,21 +8,6 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      # FIXME: https://github.com/jlumbroso/free-disk-space/issues/17
-      - name: same as 'large-packages' but without 'google-cloud-sdk'
-        shell: bash
-        run: |
-          sudo apt-get update
-          sudo apt-get remove -y '^dotnet-.*' || true
-          sudo apt-get remove -y '^llvm-.*' || true
-          sudo apt-get remove -y 'php.*' || true
-          sudo apt-get remove -y '^mongodb-.*' || true
-          sudo apt-get remove -y '^mysql-.*' || true
-          sudo apt-get remove -y azure-cli google-chrome-stable firefox powershell mono-devel libgl1-mesa-dri || true
-          sudo apt-get autoremove -y
-          sudo apt-get clean
-        env:
-          DEBIAN_FRONTEND: noninteractive
       - name: Free Disk Space (Ubuntu)
         uses: jlumbroso/free-disk-space@main
         with:

.github/workflows/release-tag-rc.yml

@@ -56,6 +56,10 @@ jobs:
       - name: upload binaries to s3
         run: |
           aws s3 sync dist/release s3://${{ secrets.AWS_S3_BUCKET }}/gitea/${{ steps.clean_name.outputs.branch }} --no-progress
+      - name: Install GH CLI
+        uses: dev-hanz-ops/[email protected]
+        with:
+          gh-cli-version: 2.39.1
       - name: create github release
         run: |
           gh release create ${{ github.ref_name }} --title ${{ github.ref_name }} --draft --notes-from-tag dist/release/*

.github/workflows/release-tag-version.yml

@@ -58,9 +58,13 @@ jobs:
       - name: upload binaries to s3
         run: |
           aws s3 sync dist/release s3://${{ secrets.AWS_S3_BUCKET }}/gitea/${{ steps.clean_name.outputs.branch }} --no-progress
+      - name: Install GH CLI
+        uses: dev-hanz-ops/[email protected]
+        with:
+          gh-cli-version: 2.39.1
       - name: create github release
         run: |
-          gh release create ${{ github.ref_name }} --title ${{ github.ref_name }} --draft --notes-from-tag dist/release/*
+          gh release create ${{ github.ref_name }} --title ${{ github.ref_name }} --notes-from-tag dist/release/*
         env:
           GITHUB_TOKEN: ${{ secrets.RELEASE_TOKEN }}
   docker-rootful:

docs/content/administration/email-setup.en-us.md

@@ -61,7 +61,7 @@ Please note: authentication is only supported when the SMTP server communication
 
 - STARTTLS (also known as Opportunistic TLS) via port 587. Initial connection is done over cleartext, but then be upgraded over TLS if the server supports it.
 - SMTPS connection (SMTP over TLS) via the default port 465. Connection to the server use TLS from the beginning.
-- Forced SMTPS connection with `IS_TLS_ENABLED=true`. (These are both known as Implicit TLS.)
+- Forced SMTPS connection with `PROTOCOL=smtps`. (These are both known as Implicit TLS.)
 This is due to protections imposed by the Go internal libraries against STRIPTLS attacks.
 
 Note that Implicit TLS is recommended by [RFC8314](https://tools.ietf.org/html/rfc8314#section-3) since 2018.

docs/content/administration/email-setup.zh-cn.md

@@ -55,13 +55,13 @@ PASSWD         = `password`
 
 要发送测试邮件以验证设置，请转到 Gitea > 站点管理 > 配置 > SMTP 邮件配置。
 
-有关所有选项的完整列表，请查看[配置速查表](doc/administration/config-cheat-sheet.zh-cn.md)。
+有关所有选项的完整列表，请查看[配置速查表](administration/config-cheat-sheet.md)。
 
 请注意：只有在使用 TLS 或 `HOST=localhost` 加密 SMTP 服务器通信时才支持身份验证。TLS 加密可以通过以下方式进行：
 
 - 通过端口 587 的 STARTTLS（也称为 Opportunistic TLS）。初始连接是明文的，但如果服务器支持，则可以升级为 TLS。
 - 通过默认端口 465 的 SMTPS 连接。连接到服务器从一开始就使用 TLS。
-- 使用 `IS_TLS_ENABLED=true` 进行强制的 SMTPS 连接。（这两种方式都被称为 Implicit TLS）
+- 使用 `PROTOCOL=smtps` 进行强制的 SMTPS 连接。（这两种方式都被称为 Implicit TLS）
 这是由于 Go 内部库对 STRIPTLS 攻击的保护机制。
 
 请注意，自2018年起，[RFC8314](https://tools.ietf.org/html/rfc8314#section-3) 推荐使用 Implicit TLS。

docs/content/help/faq.en-us.md

@@ -39,7 +39,6 @@ If a bug fix is targeted on 1.20.1 but 1.20.1 is not released yet, you can get t
 
 To migrate from Gogs to Gitea:
 
-- [Gogs version 0.9.146 or less](installation/upgrade-from-gogs.md)
 - [Gogs version 0.11.46.0418](https://github.com/go-gitea/gitea/issues/4286)
 
 To migrate from GitHub to Gitea, you can use Gitea's built-in migration form.

docs/content/help/faq.zh-cn.md

@@ -41,7 +41,6 @@ menu:
 
 要从Gogs迁移到Gitea：
 
-- [Gogs版本0.9.146或更低](installation/upgrade-from-gogs.md)
 - [Gogs版本0.11.46.0418](https://github.com/go-gitea/gitea/issues/4286)
 
 要从GitHub迁移到Gitea，您可以使用Gitea内置的迁移表单。

docs/content/usage/actions/act-runner.en-us.md

@@ -114,7 +114,7 @@ If you cannot see the settings page, please make sure that you have the right pe
 
 The format of the registration token is a random string `D0gvfu2iHfUjNqCYVljVyRV14fISpJxxxxxxxxxx`.
 
-A registration token can also be obtained from the gitea [command-line interface](../../administration/command-line.en-us.md#actions-generate-runner-token):
+A registration token can also be obtained from the gitea [command-line interface](administration/command-line.md#actions-generate-runner-token):
 
 ```
 gitea --config /etc/gitea/app.ini actions generate-runner-token

docs/content/usage/actions/act-runner.zh-cn.md

@@ -113,7 +113,7 @@ Runner级别决定了从哪里获取注册令牌。
 
 注册令牌的格式是一个随机字符串 `D0gvfu2iHfUjNqCYVljVyRV14fISpJxxxxxxxxxx`。
 
-注册令牌也可以通过 Gitea 的 [命令行](../../administration/command-line.en-us.md#actions-generate-runner-token) 获得:
+注册令牌也可以通过 Gitea 的 [命令行](administration/command-line.md#actions-generate-runner-token) 获得:
 
 ### 注册Runner
 

docs/content/usage/authentication.en-us.md

@@ -198,7 +198,7 @@ administrative user.
     field is set to `mail.com`, then Gitea will expect the `user email` field
     for an authenticated GIT instance to be `[email protected]`.[^2]
 
-**Note**: PAM support is added via [build-time flags](installation/install-from-source.md#build),
+**Note**: PAM support is added via [build-time flags](installation/from-source.md#build),
 and the official binaries provided do not have this enabled.  PAM requires that
 the necessary libpam dynamic library be available and the necessary PAM
 development headers be accessible to the compiler.