diff --git a/Case/Tiny Slimes Final - BTL Edit - Top with SlimeVR Logo - AUX prepared version.stl b/Case/Tiny Slimes Final - BTL Edit - Top with SlimeVR Logo - AUX prepared version.stl new file mode 100644 index 0000000..3a7ec6e Binary files /dev/null and b/Case/Tiny Slimes Final - BTL Edit - Top with SlimeVR Logo - AUX prepared version.stl differ diff --git a/Case/Tiny Slimes Final - BTL Edit - Top with SlimeVR Logo - AUX version.stl b/Case/Tiny Slimes Final - BTL Edit - Top with SlimeVR Logo - AUX version.stl new file mode 100644 index 0000000..d68223d Binary files /dev/null and b/Case/Tiny Slimes Final - BTL Edit - Top with SlimeVR Logo - AUX version.stl differ diff --git a/Case/Tiny Slimes Final - BTL Edit - Top with SlimeVR Logo.stl b/Case/Tiny Slimes Final - BTL Edit - Top with SlimeVR Logo.stl new file mode 100644 index 0000000..3e5656d Binary files /dev/null and b/Case/Tiny Slimes Final - BTL Edit - Top with SlimeVR Logo.stl differ diff --git a/Case/Tiny Slimes Final - BTL Edit - Bottom - AUX Version.stl b/Case/Tiny Slimes Final - BTL Edit - Bottom - AUX Version.stl new file mode 100644 index 0000000..d7711b3 Binary files /dev/null and b/Case/Tiny Slimes Final - BTL Edit - Bottom - AUX Version.stl differ diff --git a/Case/Tiny Slimes Final - BTL Edit - Bottom.stl b/Case/Tiny Slimes Final - BTL Edit - Bottom.stl new file mode 100644 index 0000000..f47e5e1 Binary files /dev/null and b/Case/Tiny Slimes Final - BTL Edit - Bottom.stl differ diff --git a/Case/Tiny Slimes Final - BTL Edit - Bottoms SET with Text.stl b/Case/Tiny Slimes Final - BTL Edit - Bottoms SET with Text.stl new file mode 100644 index 0000000..e73fe69 Binary files /dev/null and b/Case/Tiny Slimes Final - BTL Edit - Bottoms SET with Text.stl differ diff --git a/Case/aux-connector.stl b/Case/aux-connector.stl new file mode 100644 index 0000000..6713eed Binary files /dev/null and b/Case/aux-connector.stl differ diff --git a/README.md b/README.md index 6db2bc9..db25e32 100644 --- a/README.md +++ b/README.md @@ -487,6 +487,54 @@ with them: \*: There's barely any parts of the case that are thick enough to require infill, so don't stress about this much. +### Alternative Case Option + +![3D render of the alternative case](./images/alt-case-render.jpg) + +You can find an alternative version of the case design, meant for the button based PCB, labeled as "BTL Edit" in the case directory. +It incorporates the button into the top part, eliminating the need to print that tiny part separately. + +I somehow got 804040 with 1800mAh, which are in fact 8.6mm thick and should +therefore be labeled 864040... My case variation takes care of that. + +The tops have been made 0.8mm thicker and extended above the shell of the bottom, +so you do not accidentely push them in too far. Its also easier to reopen the case. +For the cute look I added the SlimeVR logo. + +The bottom part got size adjusted for the use of my thicker batteries. Its fine to reduce the +bottoms height by 0.5mm in your slicer for a standard 804040 battery. + +I added a small notch to keep the PCB snapped into place when its placed down to the battery. + +Optional: Support for AUX connector "BTL Edition" +For using AUX connectors I use 2.54mm spaced pins and headers I got with the +ESP32. Print `aux-connector.stl` for the little plug case. + +Make sure to make them keyed: +![picture of AUX connector](./images/aux-connector.jpg) + +#### Printing + +Same printing advice as with the original case. For the AUX connector and the +Tops, i suggest 0.15mm layers because of the tiny details in the overhangs. + +The Bottoms and Tops are available as AUX version and normal. + +If you go for a Tiny Slime without AUX, but maybe want to add AUX later, +use an AUX Version for bottom and a AUX prepared top. This top closes the +gap for AUX connector but keeps you from having to change the bottom again later. + +The Bottoms SET uses two non-AUX trackers for the thigh tracker and five AUX versions +for Chest + Hip, Ankles + Feets and Arms. + +I for example do use trackers for the arms (but no AUX-es for now), a chest Tracker +with an AUX for my hip and a pair of ankle trackers with AUX for feet. + +I needed 2 AUX prepared tops, 3 AUX tops, 2 non AUX tops. + +If you have questions regarding the alternative case with my AUX connector proposal, run +into a problem or want to suggest another modification, contact me on Discord @beetle060 . + #### Assembly To-Do: include a video of the assembly process diff --git a/images/alt-case-render.jpg b/images/alt-case-render.jpg new file mode 100644 index 0000000..6e5bb81 Binary files /dev/null and b/images/alt-case-render.jpg differ diff --git a/images/aux-connector.jpg b/images/aux-connector.jpg new file mode 100644 index 0000000..45d3f04 Binary files /dev/null and b/images/aux-connector.jpg differ