How to make PWM "spindle" laser enabled?

[gcormier]

According to reports doc, $spindlesh will report capabilities.

I want to use PWM for laser. Do I need to change something? L does not appear in capabilities.

$32
$32=1
ok
$spindlesh
[SPINDLE:3|0|2|*SDVE|Durapulse GS20|5000.0,24000.0]
[SPINDLE:0|1|0||PWM]
[SPINDLE:1|-|2|SDVE|Huanyang v1]
[SPINDLE:2|-|2|SDVE|Huanyang P2A]
[SPINDLE:4|-|2|SDVE|Yalang YS620]
[SPINDLE:5|-|2|SDVE|MODVFD]
[SPINDLE:6|-|2|SDVE|H-100]
[SPINDLE:7|-|2|SDVE|Nowforever]
ok

[whmountains]

I successfully did this not too long ago. I don't have my machine nearby at the moment but I'll try to help with some troubleshooting suggestions.

Are you using the web builder?

What is your spindle configuration as defined in my_machine.h, or can you share a screenshot of your setup in the web builder.

I see you have a lot of spindles configured there. Surely you're not using all of them at once. What if you narrow it down to just the PWM spindle for the laser?

The asterisk tells me that spindle 3 is the active spindle. What happens when you select spindle 0 instead?

[gcormier]

I am using web builder, and I simply chose "All" to compile all VFD support in the firmware.

Picking PWM spindle does not change anything

$spindlesh
ok
[SPINDLE:3|0|2|SDVE|Durapulse GS20|5000.0,24000.0]
[SPINDLE:0|1|0|*|PWM]
[SPINDLE:1|-|2|SDVE|Huanyang v1]
[SPINDLE:2|-|2|SDVE|Huanyang P2A]
[SPINDLE:4|-|2|SDVE|Yalang YS620]
[SPINDLE:5|-|2|SDVE|MODVFD]
[SPINDLE:6|-|2|SDVE|H-100]
[SPINDLE:7|-|2|SDVE|Nowforever]

[terjeio]

Fix committed. The bug only affected reporting, not function. Odd thing was that it did not show up in debug builds.