[BREAKING] - Refactor NimBLEAdvertising

* General code cleanup.
* `NimBLEAdvertisementData` moved to it's own .h and .cpp files.
* Added new method, `NimBLEAdvertising::setPreferredParams` that takes the min and max preferred connection parameters as an alternative for `setMinPreferred` and `setMaxPreferred`.
* Added new method, `NimBLEAdvertising::setAdvertisingInterval` Sets the advertisement interval for min and max to the same value instead of calling `setMinInterval` and `setMaxInterval` separately if there is not value difference.
* `NimBLEAdvertisementData` payload is now stored in `std::vector<uint8_t>` instead of `std::string`.
* `NimBLEAdvertisementData::getPayload` now returns `std::vector<uint8_t>` instead of `std::string`.
* `NimBLEAdvertisementData::addData` now takes either a `std::vector<uint8_t>` or `uint8_t* + length` instead of `std::string` or `char + length`.
* `NimBLEAdvertisementData::setName` now takes an optional `bool` parameter to indicate if the name is complete or incomplete, default = complete.
* `NimBLEAdvertising::start` No longer takes a callback pointer parameter, instead the new method `NimBLEAdvertising::setAdvertisingCompleteCallback` should be used.
* `NimBLEAdvertising::setAdvertisementType` has been renamed to `NimBLEAdvertising::setConnectableMode` to better reflect it's function.
* `NimBLEAdvertising::setScanResponse` has been renamed to `NimBLEAdvertising::enableScanResponse` to better reflect it's function.
* Scan response is no longer enabled by default.
* Added new method, `NimBLEAdvertising::setDiscoverableMode` to allow applications to control the discoverability of the advertiser.
* Advertising the name and TX power of the device will no longer happen by default and should be set manually by the application.
* Added overload for `NimBLEAdvertising::setManufacturerData` that takes a `const uint8_t*` and , size_t` paramter.
* Added overload for `NimBLEAdvertising::setServiceData` that takes `const NimBLEUUID& uuid`, ` const uint8_t* data`, ` size_t length` as parameters.
* Added overload for `NimBLEAdvertising::setServiceData` that takes `const NimBLEUUID& uuid`, `const std::vector<uint8_t>&` as parameters.
* All `NimBLEAdvertisementData` functions that change data values now return `bool`, true = success.
* All `NimBLEAdvertising` functions that change data values now return `bool`, true = success.
* `NimBLEAdvertising::setMinPreferred` and `NimBLEAdvertising::setMaxPreferred` have been removed, use `NimBLEAdvertising::setPreferredParams` instead.
* All advertising data is now stored in instances of `NimBLEAdvertisingData` and vectors removed from `NimBLEAdvertising`.
* `NimBLEAdvertising::setAdvertisementData` and `NimBLEAdvertising::setScanResponseData` now return `bool`, true = success.
* Added new method, `NimBLEAdvertisementData::removeData`, which takes a parameter `uint8_t type`, the data type to remove.
* Added new method, `NimBLEAdvertisementData::toString`, which will print the data in hex.
* Added new method, `NimBLEAdvertising::getAdvertisementData`, which returns a reference to the currently set advertisement data.
* Added new method, `NimBLEAdvertising::getScanData`, which returns a reference to the currently set scan response data.
* Added overloads for `NimBLEAdvertising::removeServiceUUID` and `NimBLEAdvertisementData::removeServiceUUID` to accept a `const char*`
* Added new method, `NimBLEAdvertising::clearData`, which will clear the advertisement and scan response data.

Author: h2zero

examples/BLE_EddystoneTLM_Beacon/BLE_EddystoneTLM_Beacon.ino

@@ -12,7 +12,7 @@
    4. wait
    5. Stop advertising.
    6. deep sleep
-   
+
 */
 
 #include "NimBLEDevice.h"
@@ -26,7 +26,7 @@
 #define GPIO_DEEP_SLEEP_DURATION 10     // sleep x seconds and then wake up
 
 // UUID 1 128-Bit (may use linux tool uuidgen or random numbers via https://www.uuidgenerator.net/)
-#define BEACON_UUID "8ec76ea3-6668-48da-9866-75be8bc86f4d" 
+#define BEACON_UUID "8ec76ea3-6668-48da-9866-75be8bc86f4d"
 
 RTC_DATA_ATTR static time_t last;    // remember last boot in RTC Memory
 RTC_DATA_ATTR static uint32_t bootcount; // remember number of boots in RTC Memory
@@ -96,6 +96,7 @@ void setup()
   BLEDevice::setPower(ESP_PWR_LVL_N12);
 
   pAdvertising = BLEDevice::getAdvertising();
+  pAdvertising->enableScanResponse(true);
 
   setBeacon();
   // Start advertising

examples/BLE_EddystoneURL_Beacon/BLE_EddystoneURL_Beacon.ino

@@ -26,7 +26,7 @@
 #define GPIO_DEEP_SLEEP_DURATION 10     // sleep x seconds and then wake up
 
 // UUID 1 128-Bit (may use linux tool uuidgen or random numbers via https://www.uuidgenerator.net/)
-#define BEACON_UUID "8ec76ea3-6668-48da-9866-75be8bc86f4d" 
+#define BEACON_UUID "8ec76ea3-6668-48da-9866-75be8bc86f4d"
 
 RTC_DATA_ATTR static time_t last;    // remember last boot in RTC Memory
 RTC_DATA_ATTR static uint32_t bootcount; // remember number of boots in RTC Memory
@@ -168,6 +168,7 @@ void setup()
   BLEDevice::setPower(ESP_PWR_LVL_N12);
 
   pAdvertising = BLEDevice::getAdvertising();
+  pAdvertising->enableScanResponse(true);
 
   setBeacon();
   // Start advertising

examples/NimBLE_Server/NimBLE_Server.ino

@@ -227,7 +227,7 @@ void setup() {
     /** If your device is battery powered you may consider setting scan response
      *  to false as it will extend battery life at the expense of less data sent.
      */
-    pAdvertising->setScanResponse(true);
+    pAdvertising->enableScanResponse(true);
     pAdvertising->start();
 
     Serial.println("Advertising Started");

examples/NimBLE_Server_Whitelist/NimBLE_Server_Whitelist.ino

@@ -71,7 +71,7 @@ void setup() {
   // Start advertising
   NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
   pAdvertising->addServiceUUID(SERVICE_UUID);
-  pAdvertising->setScanResponse(false);
+  pAdvertising->enableScanResponse(false);
   pAdvertising->start();
   Serial.println("Waiting a client connection to notify...");
 }

examples/NimBLE_server_get_client_name/NimBLE_server_get_client_name.ino

@@ -67,7 +67,7 @@ void setup() {
 
     BLEAdvertising* pAdvertising = NimBLEDevice::getAdvertising();
     pAdvertising->addServiceUUID(SERVICE_UUID);
-    pAdvertising->setScanResponse(true);
+    pAdvertising->enableScanResponse(true);
 
     pAdvertising->start();
     Serial.println("Advertising started, connect with your phone.");

examples/Refactored_original_examples/BLE_notify/BLE_notify.ino

@@ -118,7 +118,7 @@ void setup() {
   // Start advertising
   BLEAdvertising *pAdvertising = BLEDevice::getAdvertising();
   pAdvertising->addServiceUUID(SERVICE_UUID);
-  pAdvertising->setScanResponse(false);
+  pAdvertising->enableScanResponse(false);
   /** Note, this could be left out as that is the default value */
   pAdvertising->setMinPreferred(0x0);  // set value to 0x00 to not advertise this parameter
 

examples/Refactored_original_examples/BLE_server/BLE_server.ino

@@ -29,21 +29,21 @@ void setup() {
   BLEService *pService = pServer->createService(SERVICE_UUID);
   BLECharacteristic *pCharacteristic = pService->createCharacteristic(
                                         CHARACTERISTIC_UUID,
-                                  /***** Enum Type NIMBLE_PROPERTY now *****      
+                                  /***** Enum Type NIMBLE_PROPERTY now *****
                                         BLECharacteristic::PROPERTY_READ   |
-                                        BLECharacteristic::PROPERTY_WRITE  
+                                        BLECharacteristic::PROPERTY_WRITE
                                         );
                                   *****************************************/
                                         NIMBLE_PROPERTY::READ |
-                                        NIMBLE_PROPERTY::WRITE 
+                                        NIMBLE_PROPERTY::WRITE
                                        );
 
   pCharacteristic->setValue("Hello World says Neil");
   pService->start();
   // BLEAdvertising *pAdvertising = pServer->getAdvertising();  // this still is working for backward compatibility
   BLEAdvertising *pAdvertising = BLEDevice::getAdvertising();
   pAdvertising->addServiceUUID(SERVICE_UUID);
-  pAdvertising->setScanResponse(true);
+  pAdvertising->enableScanResponse(true);
   pAdvertising->setMinPreferred(0x06);  // functions that help with iPhone connections issue
   pAdvertising->setMaxPreferred(0x12);
 

examples/Refactored_original_examples/BLE_server_multiconnect/BLE_server_multiconnect.ino

@@ -122,7 +122,7 @@ void setup() {
   // Start advertising
   BLEAdvertising *pAdvertising = BLEDevice::getAdvertising();
   pAdvertising->addServiceUUID(SERVICE_UUID);
-  pAdvertising->setScanResponse(false);
+  pAdvertising->enableScanResponse(false);
   /** Note, this could be left out as that is the default value */
   pAdvertising->setMinPreferred(0x0);  // set value to 0x00 to not advertise this parameter