dts: xilinx: zynq7000: zynqmp: remove amba-ahb-dbus-width parameter

Remove the obsolete DT parameter "amba-ahb-dbus-width" from all GEM
controller instance declarations for both the Zynq-7000 and the
ZynqMP.

The value matching the current target SoC is now being read at
run-time from a design configuration register

Signed-off-by: Immo Birnbaum <[email protected]>

Author: ibirnbaum

dts/arm/xilinx/zynq7000.dtsi

@@ -61,7 +61,6 @@
 			mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
 			phy-poll-interval = <1000>;
 			link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
-			amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
 			amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
 			hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
 			hw-rx-buffer-offset = <0>;
@@ -88,7 +87,6 @@
 			mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
 			phy-poll-interval = <1000>;
 			link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
-			amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
 			amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
 			hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
 			hw-rx-buffer-offset = <0>;

dts/arm/xilinx/zynqmp.dtsi

@@ -110,7 +110,6 @@
 			mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
 			phy-poll-interval = <1000>;
 			link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
-			amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
 			amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
 			hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
 			hw-rx-buffer-offset = <0>;
@@ -137,7 +136,6 @@
 			mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
 			phy-poll-interval = <1000>;
 			link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
-			amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
 			amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
 			hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
 			hw-rx-buffer-offset = <0>;
@@ -164,7 +162,6 @@
 			mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
 			phy-poll-interval = <1000>;
 			link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
-			amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
 			amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
 			hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
 			hw-rx-buffer-offset = <0>;
@@ -191,7 +188,6 @@
 			mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
 			phy-poll-interval = <1000>;
 			link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
-			amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
 			amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
 			hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
 			hw-rx-buffer-offset = <0>;